From 70423ce723b89271f937d483a3001e4e08abb1d4 Mon Sep 17 00:00:00 2001
From: Nicholas Ward <nicholaspward@outlook.com>
Date: Sat, 5 Jul 2025 15:36:34 +0000
Subject: [PATCH] Clean history, git LFS

---
 .gitattributes                                |   7 +
 .gitea/workflows/containerize.yaml            |  50 ++
 .gitignore                                    |  21 +
 .gitmodules                                   |   3 +
 README.md                                     |  42 ++
 container/Dockerfile                          |   7 +
 container/site/archetypes/default.md          |   5 +
 container/site/content/about/index.md         |  13 +
 .../posts/2024-04-car-maintenance/index.md    | 104 +++
 .../2024-christmas-eve-appetizers/index.md    |  57 ++
 .../2024-garden/herb-garden-gallery.yaml      |  18 +
 .../site/content/posts/2024-garden/index.md   |  37 ++
 .../2024-garden/vegetable-garden-gallery.yaml |  22 +
 .../posts/2025-03-car-maintenance/index.md    |  21 +
 .../2025-garden/herb-garden-gallery.yaml      |   3 +
 .../site/content/posts/2025-garden/index.md   |  29 +
 .../posts/2025-garden/seed-gallery.yaml       |  16 +
 .../posts/2025-garden/seedling-gallery.yaml   |  10 +
 .../2025-garden/vegetable-garden-gallery.yaml |   0
 container/site/content/posts/about.md         |  15 +
 .../american-pizza-gallery.yaml               |  16 +
 .../content/posts/american-pizza/index.md     |  17 +
 .../posts/baltimore/baltimore-gallery.yaml    |  76 +++
 .../site/content/posts/baltimore/index.md     |  31 +
 .../banoffee-pie/banoffee-pie-gallery.yaml    |  28 +
 .../site/content/posts/banoffee-pie/index.md  |  24 +
 .../posts/bicycle-brakes-replacement/index.md | 134 ++++
 .../posts/bicycle-pump-sprayer/index.md       |  85 +++
 container/site/content/posts/burrito/index.md |  64 ++
 .../posts/car-maintenance-brakes/index.md     |  30 +
 .../site/content/posts/dc-nyc/dcnyc.yaml      | 103 +++
 container/site/content/posts/dc-nyc/index.md  |  16 +
 .../posts/dominos-garlic-oil-blend/index.md   |  22 +
 .../posts/dynamic-dns/images/architecture.png |   3 +
 .../images/aws-cloudshell-newrecord.py.jpg    |   3 +
 .../dynamic-dns/images/aws-cloudshell.jpg     |   3 +
 .../site/content/posts/dynamic-dns/index.md   |  71 ++
 .../earl-grey-cake/earl-grey-gallery.yaml     |  34 +
 .../content/posts/earl-grey-cake/index.md     |  14 +
 .../site/content/posts/egg-replacer/index.md  |  97 +++
 .../site/content/posts/email-alerts/index.md  | 306 +++++++++
 .../posts/estes-park/estes-park-gallery.yaml  |  46 ++
 .../site/content/posts/estes-park/index.md    |  22 +
 .../posts/fooddata-central-ingest/index.md    | 207 ++++++
 .../posts/formulation-web-app-I/index.md      |  96 +++
 .../posts/formulation-web-app-II/index.md     | 110 ++++
 .../site/content/posts/gitea-actions/index.md | 558 ++++++++++++++++
 .../site/content/posts/grow-lights/index.md   |  58 ++
 .../site/content/posts/hot-fudge/index.md     | 124 ++++
 .../posts/infrastructure-overhaul/index.md    | 245 +++++++
 .../content/posts/ipcam-timelapse/index.md    | 204 ++++++
 .../posts/jenkins-deploy-web-log/index.md     | 319 +++++++++
 .../posts/jenkins-deploy-website/index.md     | 191 ++++++
 container/site/content/posts/jenkins/index.md | 198 ++++++
 .../site/content/posts/key-west/index.md      |  13 +
 .../posts/key-west/key-west-gallery.yaml      | 100 +++
 .../content/posts/local-llm-setup/index.md    | 111 ++++
 .../content/posts/meat-emulsions/index.md     |  63 ++
 .../content/posts/mixed-berry-muffin/index.md |  18 +
 .../mixed-berry-muffin-gallery.yaml           |  46 ++
 .../content/posts/mod-pizza-crust/index.md    | 113 ++++
 .../content/posts/mssql-db-config/index.md    | 176 +++++
 .../content/posts/nas-build-pt-i/index.md     | 157 +++++
 .../content/posts/nas-build-pt-ii/index.md    |  26 +
 .../nas-build-pt-ii/nas-build-gallery.yaml    |  13 +
 .../pacific-northwest/images/DSC_7705.JPG     |   3 +
 .../pacific-northwest/images/DSC_7707.JPG     |   3 +
 .../pacific-northwest/images/DSC_7709.JPG     |   3 +
 .../pacific-northwest/images/DSC_7710.JPG     |   3 +
 .../pacific-northwest/images/DSC_7725.JPG     |   3 +
 .../pacific-northwest/images/DSC_7729.JPG     |   3 +
 .../pacific-northwest/images/DSC_7730.JPG     |   3 +
 .../pacific-northwest/images/DSC_7805.JPG     |   3 +
 .../pacific-northwest/images/DSC_7813.JPG     |   3 +
 .../pacific-northwest/images/DSC_7825.JPG     |   3 +
 .../pacific-northwest/images/DSC_7886.JPG     |   3 +
 .../pacific-northwest/images/DSC_7930.JPG     |   3 +
 .../pacific-northwest/images/DSC_7954.JPG     |   3 +
 .../pacific-northwest/images/DSC_7972.JPG     |   3 +
 .../pacific-northwest/images/DSC_7986.JPG     |   3 +
 .../pacific-northwest/images/DSC_8008.JPG     |   3 +
 .../pacific-northwest/images/DSC_8009.JPG     |   3 +
 .../pacific-northwest/images/DSC_8019.JPG     |   3 +
 .../pacific-northwest/images/DSC_8044.JPG     |   3 +
 .../images/PXL_20230503_125714405.jpg         |   3 +
 .../images/PXL_20230503_132730963.jpg         |   3 +
 .../images/PXL_20230503_133030961.jpg         |   3 +
 .../images/PXL_20230503_223551382.jpg         |   3 +
 .../images/PXL_20230503_223823824.jpg         |   3 +
 .../images/PXL_20230504_202149667.jpg         |   3 +
 .../images/PXL_20230505_162634712.jpg         |   3 +
 .../images/PXL_20230505_224507143.jpg         |   3 +
 .../images/PXL_20230505_225612504.jpg         |   3 +
 .../images/PXL_20230505_232206434.jpg         |   3 +
 .../images/PXL_20230506_030136974.jpg         |   3 +
 .../images/PXL_20230507_190044473.jpg         |   3 +
 .../images/PXL_20230507_195504996.jpg         |   3 +
 .../images/PXL_20230507_232645677.jpg         |   3 +
 .../images/PXL_20230509_024655993.jpg         |   3 +
 .../content/posts/pacific-northwest/index.md  |  26 +
 .../posts/pacific-northwest/pnw-gallery.yaml  |   0
 .../posts/papa-johns-garlic-butter/index.md   |  94 +++
 .../site/content/posts/pc-build/index.md      |  55 ++
 .../content/posts/photogrammetry/index.md     | 158 +++++
 .../pistachio-shortbread-cookie/index.md      |  26 +
 .../pistachio-shortbread-cookie-gallery.yaml  |  25 +
 container/site/content/posts/pita/index.md    |  61 ++
 .../site/content/posts/pita/pita-gallery.yaml |  28 +
 .../content/posts/pretzel-nuggets/index.md    | 137 ++++
 .../proxmox/images/clonezilla_restore.PNG     |   3 +
 .../posts/proxmox/images/clonezilla_usb.PNG   |   3 +
 .../posts/proxmox/images/gparted_shrink.PNG   |   3 +
 container/site/content/posts/proxmox/index.md |  78 +++
 .../site/content/posts/queso-blanco/index.md  |  77 +++
 .../posts/react-app-resurrection/index.md     | 239 +++++++
 .../site/content/posts/refried-beans/index.md | 139 ++++
 .../content/posts/server-monitor/index.md     | 281 ++++++++
 .../site/content/posts/server-rack/index.md   |  52 ++
 .../server-rack/server-rack-gallery.yaml      |  20 +
 .../content/posts/solar-generator/index.md    | 145 ++++
 .../site/content/posts/sourdough/index.md     |  46 ++
 .../posts/spice-storage-label/index.md        |  72 ++
 .../posts/spring-rest-api-pt-i/index.md       | 179 +++++
 .../posts/spring-rest-api-pt-ii/index.md      | 340 ++++++++++
 .../site/content/posts/whiteboard/index.md    |  74 +++
 .../posts/whiteboard/whiteboard-gallery.yaml  |  24 +
 .../content/posts/wildlife-stream/index.md    | 342 ++++++++++
 container/site/hugo.toml                      | 620 ++++++++++++++++++
 .../site/layouts/shortcodes/gallerynew.html   |  22 +
 container/site/layouts/shortcodes/image.html  |  16 +
 .../site/layouts/shortcodes/modelviewer.html  |  20 +
 container/site/layouts/shortcodes/video.html  |  50 ++
 container/site/static/W.svg                   |  19 +
 container/site/static/apple-touch-icon.png    |   3 +
 container/site/static/favicon-96x96.png       |   3 +
 container/site/static/favicon.ico             | Bin 0 -> 15086 bytes
 container/site/static/favicon.svg             |   3 +
 container/site/static/site.webmanifest        |  21 +
 .../site/static/web-app-manifest-192x192.png  |   3 +
 .../site/static/web-app-manifest-512x512.png  |   3 +
 container/site/themes/LoveIt                  |   1 +
 141 files changed, 8484 insertions(+)
 create mode 100644 .gitattributes
 create mode 100644 .gitea/workflows/containerize.yaml
 create mode 100644 .gitignore
 create mode 100644 .gitmodules
 create mode 100644 README.md
 create mode 100644 container/Dockerfile
 create mode 100644 container/site/archetypes/default.md
 create mode 100644 container/site/content/about/index.md
 create mode 100644 container/site/content/posts/2024-04-car-maintenance/index.md
 create mode 100644 container/site/content/posts/2024-christmas-eve-appetizers/index.md
 create mode 100644 container/site/content/posts/2024-garden/herb-garden-gallery.yaml
 create mode 100644 container/site/content/posts/2024-garden/index.md
 create mode 100644 container/site/content/posts/2024-garden/vegetable-garden-gallery.yaml
 create mode 100644 container/site/content/posts/2025-03-car-maintenance/index.md
 create mode 100644 container/site/content/posts/2025-garden/herb-garden-gallery.yaml
 create mode 100644 container/site/content/posts/2025-garden/index.md
 create mode 100644 container/site/content/posts/2025-garden/seed-gallery.yaml
 create mode 100644 container/site/content/posts/2025-garden/seedling-gallery.yaml
 create mode 100644 container/site/content/posts/2025-garden/vegetable-garden-gallery.yaml
 create mode 100644 container/site/content/posts/about.md
 create mode 100644 container/site/content/posts/american-pizza/american-pizza-gallery.yaml
 create mode 100644 container/site/content/posts/american-pizza/index.md
 create mode 100644 container/site/content/posts/baltimore/baltimore-gallery.yaml
 create mode 100644 container/site/content/posts/baltimore/index.md
 create mode 100644 container/site/content/posts/banoffee-pie/banoffee-pie-gallery.yaml
 create mode 100644 container/site/content/posts/banoffee-pie/index.md
 create mode 100644 container/site/content/posts/bicycle-brakes-replacement/index.md
 create mode 100644 container/site/content/posts/bicycle-pump-sprayer/index.md
 create mode 100644 container/site/content/posts/burrito/index.md
 create mode 100644 container/site/content/posts/car-maintenance-brakes/index.md
 create mode 100644 container/site/content/posts/dc-nyc/dcnyc.yaml
 create mode 100644 container/site/content/posts/dc-nyc/index.md
 create mode 100644 container/site/content/posts/dominos-garlic-oil-blend/index.md
 create mode 100644 container/site/content/posts/dynamic-dns/images/architecture.png
 create mode 100644 container/site/content/posts/dynamic-dns/images/aws-cloudshell-newrecord.py.jpg
 create mode 100644 container/site/content/posts/dynamic-dns/images/aws-cloudshell.jpg
 create mode 100644 container/site/content/posts/dynamic-dns/index.md
 create mode 100644 container/site/content/posts/earl-grey-cake/earl-grey-gallery.yaml
 create mode 100644 container/site/content/posts/earl-grey-cake/index.md
 create mode 100644 container/site/content/posts/egg-replacer/index.md
 create mode 100644 container/site/content/posts/email-alerts/index.md
 create mode 100644 container/site/content/posts/estes-park/estes-park-gallery.yaml
 create mode 100644 container/site/content/posts/estes-park/index.md
 create mode 100644 container/site/content/posts/fooddata-central-ingest/index.md
 create mode 100644 container/site/content/posts/formulation-web-app-I/index.md
 create mode 100644 container/site/content/posts/formulation-web-app-II/index.md
 create mode 100644 container/site/content/posts/gitea-actions/index.md
 create mode 100644 container/site/content/posts/grow-lights/index.md
 create mode 100644 container/site/content/posts/hot-fudge/index.md
 create mode 100644 container/site/content/posts/infrastructure-overhaul/index.md
 create mode 100644 container/site/content/posts/ipcam-timelapse/index.md
 create mode 100644 container/site/content/posts/jenkins-deploy-web-log/index.md
 create mode 100644 container/site/content/posts/jenkins-deploy-website/index.md
 create mode 100644 container/site/content/posts/jenkins/index.md
 create mode 100644 container/site/content/posts/key-west/index.md
 create mode 100644 container/site/content/posts/key-west/key-west-gallery.yaml
 create mode 100644 container/site/content/posts/local-llm-setup/index.md
 create mode 100644 container/site/content/posts/meat-emulsions/index.md
 create mode 100644 container/site/content/posts/mixed-berry-muffin/index.md
 create mode 100644 container/site/content/posts/mixed-berry-muffin/mixed-berry-muffin-gallery.yaml
 create mode 100644 container/site/content/posts/mod-pizza-crust/index.md
 create mode 100644 container/site/content/posts/mssql-db-config/index.md
 create mode 100644 container/site/content/posts/nas-build-pt-i/index.md
 create mode 100644 container/site/content/posts/nas-build-pt-ii/index.md
 create mode 100644 container/site/content/posts/nas-build-pt-ii/nas-build-gallery.yaml
 create mode 100644 container/site/content/posts/pacific-northwest/images/DSC_7705.JPG
 create mode 100644 container/site/content/posts/pacific-northwest/images/DSC_7707.JPG
 create mode 100644 container/site/content/posts/pacific-northwest/images/DSC_7709.JPG
 create mode 100644 container/site/content/posts/pacific-northwest/images/DSC_7710.JPG
 create mode 100644 container/site/content/posts/pacific-northwest/images/DSC_7725.JPG
 create mode 100644 container/site/content/posts/pacific-northwest/images/DSC_7729.JPG
 create mode 100644 container/site/content/posts/pacific-northwest/images/DSC_7730.JPG
 create mode 100644 container/site/content/posts/pacific-northwest/images/DSC_7805.JPG
 create mode 100644 container/site/content/posts/pacific-northwest/images/DSC_7813.JPG
 create mode 100644 container/site/content/posts/pacific-northwest/images/DSC_7825.JPG
 create mode 100644 container/site/content/posts/pacific-northwest/images/DSC_7886.JPG
 create mode 100644 container/site/content/posts/pacific-northwest/images/DSC_7930.JPG
 create mode 100644 container/site/content/posts/pacific-northwest/images/DSC_7954.JPG
 create mode 100644 container/site/content/posts/pacific-northwest/images/DSC_7972.JPG
 create mode 100644 container/site/content/posts/pacific-northwest/images/DSC_7986.JPG
 create mode 100644 container/site/content/posts/pacific-northwest/images/DSC_8008.JPG
 create mode 100644 container/site/content/posts/pacific-northwest/images/DSC_8009.JPG
 create mode 100644 container/site/content/posts/pacific-northwest/images/DSC_8019.JPG
 create mode 100644 container/site/content/posts/pacific-northwest/images/DSC_8044.JPG
 create mode 100644 container/site/content/posts/pacific-northwest/images/PXL_20230503_125714405.jpg
 create mode 100644 container/site/content/posts/pacific-northwest/images/PXL_20230503_132730963.jpg
 create mode 100644 container/site/content/posts/pacific-northwest/images/PXL_20230503_133030961.jpg
 create mode 100644 container/site/content/posts/pacific-northwest/images/PXL_20230503_223551382.jpg
 create mode 100644 container/site/content/posts/pacific-northwest/images/PXL_20230503_223823824.jpg
 create mode 100644 container/site/content/posts/pacific-northwest/images/PXL_20230504_202149667.jpg
 create mode 100644 container/site/content/posts/pacific-northwest/images/PXL_20230505_162634712.jpg
 create mode 100644 container/site/content/posts/pacific-northwest/images/PXL_20230505_224507143.jpg
 create mode 100644 container/site/content/posts/pacific-northwest/images/PXL_20230505_225612504.jpg
 create mode 100644 container/site/content/posts/pacific-northwest/images/PXL_20230505_232206434.jpg
 create mode 100644 container/site/content/posts/pacific-northwest/images/PXL_20230506_030136974.jpg
 create mode 100644 container/site/content/posts/pacific-northwest/images/PXL_20230507_190044473.jpg
 create mode 100644 container/site/content/posts/pacific-northwest/images/PXL_20230507_195504996.jpg
 create mode 100644 container/site/content/posts/pacific-northwest/images/PXL_20230507_232645677.jpg
 create mode 100644 container/site/content/posts/pacific-northwest/images/PXL_20230509_024655993.jpg
 create mode 100644 container/site/content/posts/pacific-northwest/index.md
 create mode 100644 container/site/content/posts/pacific-northwest/pnw-gallery.yaml
 create mode 100644 container/site/content/posts/papa-johns-garlic-butter/index.md
 create mode 100644 container/site/content/posts/pc-build/index.md
 create mode 100644 container/site/content/posts/photogrammetry/index.md
 create mode 100644 container/site/content/posts/pistachio-shortbread-cookie/index.md
 create mode 100644 container/site/content/posts/pistachio-shortbread-cookie/pistachio-shortbread-cookie-gallery.yaml
 create mode 100644 container/site/content/posts/pita/index.md
 create mode 100644 container/site/content/posts/pita/pita-gallery.yaml
 create mode 100644 container/site/content/posts/pretzel-nuggets/index.md
 create mode 100644 container/site/content/posts/proxmox/images/clonezilla_restore.PNG
 create mode 100644 container/site/content/posts/proxmox/images/clonezilla_usb.PNG
 create mode 100644 container/site/content/posts/proxmox/images/gparted_shrink.PNG
 create mode 100644 container/site/content/posts/proxmox/index.md
 create mode 100644 container/site/content/posts/queso-blanco/index.md
 create mode 100644 container/site/content/posts/react-app-resurrection/index.md
 create mode 100644 container/site/content/posts/refried-beans/index.md
 create mode 100644 container/site/content/posts/server-monitor/index.md
 create mode 100644 container/site/content/posts/server-rack/index.md
 create mode 100644 container/site/content/posts/server-rack/server-rack-gallery.yaml
 create mode 100644 container/site/content/posts/solar-generator/index.md
 create mode 100644 container/site/content/posts/sourdough/index.md
 create mode 100644 container/site/content/posts/spice-storage-label/index.md
 create mode 100644 container/site/content/posts/spring-rest-api-pt-i/index.md
 create mode 100644 container/site/content/posts/spring-rest-api-pt-ii/index.md
 create mode 100644 container/site/content/posts/whiteboard/index.md
 create mode 100644 container/site/content/posts/whiteboard/whiteboard-gallery.yaml
 create mode 100644 container/site/content/posts/wildlife-stream/index.md
 create mode 100644 container/site/hugo.toml
 create mode 100644 container/site/layouts/shortcodes/gallerynew.html
 create mode 100644 container/site/layouts/shortcodes/image.html
 create mode 100644 container/site/layouts/shortcodes/modelviewer.html
 create mode 100644 container/site/layouts/shortcodes/video.html
 create mode 100644 container/site/static/W.svg
 create mode 100644 container/site/static/apple-touch-icon.png
 create mode 100644 container/site/static/favicon-96x96.png
 create mode 100644 container/site/static/favicon.ico
 create mode 100644 container/site/static/favicon.svg
 create mode 100644 container/site/static/site.webmanifest
 create mode 100644 container/site/static/web-app-manifest-192x192.png
 create mode 100644 container/site/static/web-app-manifest-512x512.png
 create mode 160000 container/site/themes/LoveIt

diff --git a/.gitattributes b/.gitattributes
new file mode 100644
index 0000000..88e52dc
--- /dev/null
+++ b/.gitattributes
@@ -0,0 +1,7 @@
+*.png filter=lfs diff=lfs merge=lfs -text
+*.PNG filter=lfs diff=lfs merge=lfs -text
+*.jpg filter=lfs diff=lfs merge=lfs -text
+*.JPG filter=lfs diff=lfs merge=lfs -text
+*.mp4 filter=lfs diff=lfs merge=lfs -text
+*.MP4 filter=lfs diff=lfs merge=lfs -text
+*.webm filter=lfs diff=lfs merge=lfs -text
diff --git a/.gitea/workflows/containerize.yaml b/.gitea/workflows/containerize.yaml
new file mode 100644
index 0000000..37a84a5
--- /dev/null
+++ b/.gitea/workflows/containerize.yaml
@@ -0,0 +1,50 @@
+name: Build & Push Hugo Site Image
+
+on:
+  push:
+    branches:
+      - master
+      - feature/external-media
+  workflow_dispatch:
+
+jobs:
+  containerize:
+    name: 'containerize'
+    env:
+      REGISTRY_USERNAME: nicholas
+      IMAGE_REGISTRY: git.uuard.com
+      IMAGE_NAME: nicholas/web-log
+      IMAGE_TAG: ${{ github.sha }}
+    runs-on: ubuntu-latest
+    steps:
+      - name: ⬇️ Checkout repo
+        uses: actions/checkout@v4
+        with:
+          submodules: recursive
+
+      - name: ⚙️ Setup Hugo
+        uses: peaceiris/actions-hugo@v3
+        with:
+          hugo-version: '0.147.9'
+          extended: true
+
+      - name: 🏗️ Build Hugo site
+        working-directory: container/site
+        run: hugo --minify
+
+      - name: 🔐 Gitea Registry Login
+        uses: docker/login-action@v3
+        with:
+          registry: ${{ env.IMAGE_REGISTRY }}
+          username: ${{ env.REGISTRY_USERNAME }}
+          password: ${{ secrets.REPO_PKG_TOKEN }}
+
+      - name: 🐋 Build Docker image
+        run: docker build -t $IMAGE_REGISTRY/$IMAGE_NAME:$IMAGE_TAG ./container
+
+      - name: 🚀 Push Docker image
+        run: docker push $IMAGE_REGISTRY/$IMAGE_NAME:$IMAGE_TAG
+        
+      - name: 🧹 Prune images
+        if: always()
+        run: docker image prune -f
diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..40d0ce7
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1,21 @@
+# Created by https://www.toptal.com/developers/gitignore/api/hugo
+# Edit at https://www.toptal.com/developers/gitignore?templates=hugo
+
+### Hugo ###
+# Generated files by hugo
+container/site/public/
+container/site/resources/_gen/
+container/site/assets/jsconfig.json
+container/site/hugo_stats.json
+
+# Executable may be added to repository
+hugo.exe
+hugo.darwin
+hugo.linux
+
+# Temporary lock file while building
+container/site/.hugo_build.lock
+
+# End of https://www.toptal.com/developers/gitignore/api/hugo
+
+/.vscode/
diff --git a/.gitmodules b/.gitmodules
new file mode 100644
index 0000000..418914f
--- /dev/null
+++ b/.gitmodules
@@ -0,0 +1,3 @@
+[submodule "container/site/themes/LoveIt"]
+	path = container/site/themes/LoveIt
+	url = https://github.com/sulrich/LoveIt.git
diff --git a/README.md b/README.md
new file mode 100644
index 0000000..be453f8
--- /dev/null
+++ b/README.md
@@ -0,0 +1,42 @@
+# web log
+This is my personal blog.
+
+## Tech Stack
+- [Hugo](https://gohugo.io/)
+- [Markdown](https://daringfireball.net/projects/markdown/)
+- Submodules:
+    - [LoveIt theme](https://github.com/dillonzq/LoveIt)
+
+### clone repository
+To clone the repo and its submodules in one step:
+ ```shell
+git clone --recurse-submodules https://git.uuard.com/nicholas/web-log.git
+```
+or
+
+```shell
+git clone https://git.uuard.com/nicholas/web-log.git
+cd web-log/themes
+git submodule update --init --recursive
+```
+
+### update submodules
+```shell
+git submodule update --remote --merge`
+```
+
+### development server
+```shell
+hugo server
+```
+
+### production
+I have configured the Hugo site to serve media assets (images, videos) from an external host. To enable this, I have:
+
+- Defined a base URL for file server in my `hugo.toml`:
+
+    `filesBase = "https://files.web-log.uuard.com"`
+- Created custom shortcodes (gallery, video, image) that:
+    - Accept a relative path (e.g. `"videos/fells-point-path.webm"`)
+    - Resolve the full asset URL using the `filesBase` parameter
+    - Use the full URL in (e.g. `<video>`, `<img>`) HTML elements
\ No newline at end of file
diff --git a/container/Dockerfile b/container/Dockerfile
new file mode 100644
index 0000000..94d3933
--- /dev/null
+++ b/container/Dockerfile
@@ -0,0 +1,7 @@
+FROM nginx:alpine
+
+RUN rm -rf /usr/share/nginx/html/*
+
+COPY site/public /usr/share/nginx/html/
+
+EXPOSE 80
\ No newline at end of file
diff --git a/container/site/archetypes/default.md b/container/site/archetypes/default.md
new file mode 100644
index 0000000..25b6752
--- /dev/null
+++ b/container/site/archetypes/default.md
@@ -0,0 +1,5 @@
++++
+date = '{{ .Date }}'
+draft = true
+title = '{{ replace .File.ContentBaseName "-" " " | title }}'
++++
diff --git a/container/site/content/about/index.md b/container/site/content/about/index.md
new file mode 100644
index 0000000..c2aacb7
--- /dev/null
+++ b/container/site/content/about/index.md
@@ -0,0 +1,13 @@
++++
+date = 2024-03-09T03:16:57Z
+description = ""
+draft = false
+slug = "about"
+title = "About This Site"
+author = "nicholas"
++++
+
+
+This site was created using the static site generator `Hugo`.
+
+This is a *web log*, not a *blog*, though the distinction exists only in my head, and serves as a way to distance myself from the word blog itself, which now seems to connote something odd I cannot quite put my finger on. Perhaps relevant is that I do not like portmanteaus. They reduce precision and create ambiguity by default. They have the feeling of whimsy and unseriousness.
diff --git a/container/site/content/posts/2024-04-car-maintenance/index.md b/container/site/content/posts/2024-04-car-maintenance/index.md
new file mode 100644
index 0000000..05bda82
--- /dev/null
+++ b/container/site/content/posts/2024-04-car-maintenance/index.md
@@ -0,0 +1,104 @@
++++
+categories = ["vehicle"]
+date = 2024-04-27T05:30:14Z
+description = ""
+draft = false
+slug = "2024-04-maintenance"
+title = "🚗 Car Maintenance - Oil, Filter, Engine Coolant"
+author = "nicholas"
++++
+
+
+Labor is expensive and tools are cheap. These are the premises upon which I figure I should change the oil and oil filter myself. And I like to do things myself sometimes, it is not always about the cost savings. Maybe one day my body will fail me or I simply will not want to do it anymore. I am not totally committed to doing everything myself *all* the time.
+
+## Engine Coolant
+The engine coolant leaks constantly, from where I do not know, very slowly, on the order of maybe less than a teaspoon a day. All attempts at stopping the leak have failed, which includes replacing a couple different hoses and fittings (I did myself), as well as some "repairs" completed by an auto repair shop. To be fair to myself, the leak rate does appear to have slowed noticeably since the problem appeared, so my own repairs were probably not totally in vain. I find additional comfort in knowing that these components would have failed eventually and I have therefore performed *preventative* maintenance . Also, a professional auto repair garage failed to properly diagnose and solve the problem too, so how bad is everything? Not bad at all. It is far cheaper to continue to top up with engine coolant every month than it is to continue to waste time and money on diagnostics and fixes.
+
+{{< image 
+    src="engine-coolant-reservoir.jpg" 
+    caption="Engine coolant low because it leaks slowly" >}}
+
+{{< image 
+    src="engine-coolant-refilled.jpg" 
+    caption="Engine coolant filled" >}}
+
+
+### Supply List
+
+{{< image 
+    src="oil-change-setup.jpg" 
+    caption="Oil change supplies" >}}
+
+
+- 3/8" drive torque wrench
+- 3/8" drive 15/16" hex socket
+- 3/8" drive socket extender
+- 10mm socket (or 17mm socket) *
+- *ACDelco* PF2257Gr oil filter
+- SAE 5W-30 OIL 5 qt.
+- Funnel
+- Oil pan
+- Nitrile Gloves
+- Car ramps (2)
+- Wheel chocks (2)
+- Flat head screwdriver
+- Shop towels
+- Vegetable oil jug (for spent oil)
+- Engine Coolant
+
+## Getting Under the Car
+### Jack Stands
+One issue with using jack stands is the potential for fatigue failure in the crimp welds. This type of weld is relatively weak – two pieces of sheet metal crimped together. Each time the car is lifted at the jack points, the welds are stressed and deform the metal. There is a finite number of times the jack point can be subjected to these stresses before dangerous cracks appear, and eventually total failure of the weld.
+
+Another issue with the crimp welds that form the recommended jack points on the Chevy Cruze is its susceptibility to corrosion, especially in environments that would expose the welds to moisture and salt – they seep into the joints and cause corrosion over time. This issue is especially present in heavily-salted winter roads in the mid-west.
+
+### Car Ramps
+I bought a pair of car ramps and wheel chocks. The reviews are great, no one seems to be getting crushed to death as a result of the product failing. It worked great. I was easily able to reach the oil drain plug, with enough vertical clearance for both the oil pan and the socket wrench.
+
+{{< image 
+    src="car_ramp.jpg"
+    caption="Car ramps product image" >}}
+
+{{< image 
+    src="car_ramp_reviews.png" 
+    caption="Harbor Freight Tools car ramp reviews" >}}
+
+{{< image 
+    src="oil-change-ramp.jpg" 
+    caption="Car ramp" >}}
+
+
+## Oil Change Procedure:
+ 1.  Pull out the dipstick to vent the oil reservoir and prevent vacuum during drain.
+ 2.  Place oil pan underneath oil plug.
+ 3.  Remove oil plug using 17mm socket, allow oil to drain for some time.
+ 4.  Remove oil filter housing with 15/16" socket. Use socket extender
+ 5.  Remove oil filter from housing (pull)
+ 6.  Remove old o-ring from filter housing
+ 7.  Replace filter housing o-ring with new
+ 8.  Install new filter in housing (press)
+ 9.  Install filter assembly. Torque to just snug
+ 10. When oil is finished draining, replace oil plug (~6Nm)
+ 11. Open oil reservoir cap
+ 12. Use funnel to pour in ~3.5 quarts. Check dip stick.
+ 13. Continue to add oil until dip stick shows oil between the hatch markings.
+ 14. Replace oil cap.
+ 15. Dispose of spent oil.
+
+{{< image 
+    src="oil-change-plug.jpg" 
+    caption="Oil drain plug" >}}
+
+{{< image 
+    src="dipstick.jpg" 
+    caption="Dipstick indicator" >}}
+
+{{< image 
+    src="oil-change-old-oil-funnel.jpg" 
+    caption="Spent oil collected in oil pan" >}}
+
+{{< image 
+    src="oil-change-old-oil.jpg" 
+    caption="Spent oil" >}}
+
+Done.
\ No newline at end of file
diff --git a/container/site/content/posts/2024-christmas-eve-appetizers/index.md b/container/site/content/posts/2024-christmas-eve-appetizers/index.md
new file mode 100644
index 0000000..d14e49b
--- /dev/null
+++ b/container/site/content/posts/2024-christmas-eve-appetizers/index.md
@@ -0,0 +1,57 @@
++++
+categories = ["food"]
+date = 2024-12-20T10:30:00Z
+description = ""
+draft = false
+slug = "2024-christmas-eve-appetizer-party"
+title = "🎄2024 Christmas Eve Party Appetizers"
+author = "nicholas"
++++
+
+The trick is to select a food that will stay viable through the 2 hour drive, plus the interim time after it is finished being prepared (Some amount of built-in margin for unexpected delays is prudent). Without catering tools this is surprisingly difficult, especially for someone probably too concerned about food-borne illnesses. This is a dark but comforting thought: if someone(s) *did* get sick it is unlikely that they would be able to determine the offending food. The sample size is small, hopefully especially small for those who *did* develop the illness. Plenty of plausible deniability since they probably ate other foods too.
+
+Basically, we need to choose a food based on two criteria:
+- How well the food "keeps",  i.e. how well the freshness, texture, flavor, and overall quality is preserved after being prepared and stored
+- How well the food "travels", i.e. durability, food-safe temperature requirements, etc.
+
+## Pretzel Nuggets
+We made pretzel nuggets and traditional beer cheese for a family Christmas Eve gathering. We made two variations of the pretzel nuggets: *plan (salted)*, and *cinnamon sugar*.
+
+### Cinnamon Sugar ★★★☆☆
+This one was disappointing, the sugars eventually dissolved and made a sticky syrup which ruined the look. This was probably made worse by applying the sugar too soon, while the nuggets were still warm and moisture was still rapidly migrating to the surface, acting as a solvent for the sugar. They still tasted excellent.
+
+### Plain (salted) ★★★★☆
+These were very good, if a little stale by the time they were eaten ~4 hours later, but this is to be expected for a baked product containing no fat and high surface area-to-volume ratio. This must be part of why Auntie Anne's prefers to bake pretzels "on demand" (duh).
+
+## Beer Cheese ★★☆☆☆
+My poor opinion of this recipe and resultant food depends much on the selection of ingredients and preparation. The beer we selected was too bitter, and temperature of the cheese was too low (room temperature). It became grainy and sludge-like because it was thickened with flour. Since I did not have any tested recipes that would fill the need for pretzel dip, I was aiming to be *traditional* by picking a *traditional* beer cheese recipe, thinking that if it was *traditional* it would be well-tested and *good* having survived many years. Next time I will just melt down some American cheese into a pot of milk with mega-brand beer and this will probably be superior. 
+
+### Beer
+
+{{< image 
+    src="images/piney-river-missouri-mule-ipa.PNG" 
+    caption="Missouri Mule IPA" >}}
+
+I do not know much about beer, and what I *do* know is not quite relevant to drinking it, or consuming it otherwise, so I am not in a position to evaluate the quality of the beer I selected. I am however, able to evaluate the subjective elements of a beer, namely taste (it was bad). It smelled odd, and it left a bad aftertaste. Apparently the beer is made with filtered water sourced from a well. This is marketed as "Ozarks water".
+
+> “We’ve always had excellent Ozarks water to capture our sense of ‘place’ in our beer, and we’ve used locally harvested and grown ingredients in some beers, too”
+> 
+> — **Brian Durham**, Founder & Owner Piney River Brewing Co.
+
+I read their site for one minute and already I see what they are trying to do and I do not like it. Their marketing is not built for me. "...capture our sense of 'place'...". I insist that that "place" was a barnyard. I am sick to death of the kitschy pretentiousness, of their gimmicks and their saccharine anemoia.
+
+## Other appetizers attending
+- stuffed mushroom
+- cheese balls, various
+- pineapple upside down cake
+- pig in a blanket
+- spinach roll-ups
+- shrimp
+- little smokies
+- chocolate pie
+- chick-fil-a nuggets
+- etc.
+
+## Ideas for next time
+- Quiche - Caramelized Onion, Bacon, Cheese
+- Christmas Focaccia
\ No newline at end of file
diff --git a/container/site/content/posts/2024-garden/herb-garden-gallery.yaml b/container/site/content/posts/2024-garden/herb-garden-gallery.yaml
new file mode 100644
index 0000000..2dcfbac
--- /dev/null
+++ b/container/site/content/posts/2024-garden/herb-garden-gallery.yaml
@@ -0,0 +1,18 @@
+images:
+  - src: "images/herb-garden/herb-garden-enclosure.jpg"
+    alt: "Raised bed herb garden enclosure made of wood and plastic sheeting"
+    caption: "Herb garden enclosure"
+  - src: "images/herb-garden/herb-garden-baby-basil.JPG"
+    alt: "Small basil plant growing"
+    caption: "Baby basil"
+  - src: "images/herb-garden/herb-garden-tomato-and-basil.jpg"
+    alt: "Tomato and basil in herb garden"
+    caption: "Tomato and basil growing together"
+  - src: "images/herb-garden/apartment-view-herb-garden.jpg"
+    alt: "Herb garden viewed through glass door"
+    caption: "Herb garden outside"
+  - src: "images/herb-garden/basil-overgrown.jpg"
+    alt: "Overgrown raised planter"
+    caption: "Lots of basil"
+  
+ 
diff --git a/container/site/content/posts/2024-garden/index.md b/container/site/content/posts/2024-garden/index.md
new file mode 100644
index 0000000..d953130
--- /dev/null
+++ b/container/site/content/posts/2024-garden/index.md
@@ -0,0 +1,37 @@
++++
+categories = ["plants"]
+date = 2024-04-23T13:53:30Z
+description = ""
+draft = false
+slug = "2024-garden"
+title = "🥕 2024 Garden"
+author = "nicholas"
++++
+
+## Raised Bed Vegetable Garden
+In April 2023 I built a raised bed out of recycled deck boards that were harvested from a disassembled old project (a wooden deck mounted atop the latter rack of my truck). The original lumber was pressure-treated and stained, which in some ways was ideal and in other ways possibly bad. It was suitable for outdoor use and for contact with the ground on account of the treatments, which is great, but for the same reasons it was also a hazard for the many chemicals that *may* leech into the soil and *may* be absorbed into the plant. After some amount of research and consideration, we decided that we would be fine.
+
+### Construction
+The garden bed is roughly 6' x 4' x 16" and contains three layers, presented in the same order found in the garden bed:
+- bagged topsoil from Home Depot.
+- 1 cubic yard layer of "topsoil" from a local compost business
+- mulch
+
+#### Topsoil
+To acquire and transport the topsoil, we lined the bed of my truck with a thick plastic tarp and stood back to watch a skid steer operator dump the dirt precisely between the beams of the ladder rack. When we arrived back at the house, I backed the truck into the yard and positioned the truck so that the tailgate would overhang the garden bed, and the dirt could simply be shoveled to the rear. Once enough dirt was shoveled out, we could drag the tarp out of the back, bringing with it the remaining dirt. It was quick compared to any other method I could think of. 
+
+#### Growth Time-lapse
+Each time I visited to help water and prune, I tried to remember to photograph the planter. Later I would create a stack of the images in Photoshop and use the auto-alignment tool to give the time-lapse some smoothness. Below is the result. This coarse-grained, very short time-lapse covers the day the plants were transplanted (sometime in April), to mid-July when the first tomatoes fully ripened.
+
+{{< video
+  src="videos/garden-timelapse.webm"
+  width="100%"
+>}}
+
+## Photos
+### Vegetable Garden
+{{< gallerynew name="vegetable-garden-gallery" >}}
+
+
+## Herb Garden
+{{< gallerynew name="herb-garden-gallery" >}}
diff --git a/container/site/content/posts/2024-garden/vegetable-garden-gallery.yaml b/container/site/content/posts/2024-garden/vegetable-garden-gallery.yaml
new file mode 100644
index 0000000..40d1838
--- /dev/null
+++ b/container/site/content/posts/2024-garden/vegetable-garden-gallery.yaml
@@ -0,0 +1,22 @@
+images:
+  - src: "images/vegetable-garden/seedlings.JPG"
+    alt: "Young tomato plants"
+    caption: "Small tomato plant"
+  - src: "images/vegetable-garden/bailey-tomatoes.jpg"
+    alt: "Beautiful girl posing with plastic deli containers full of cherry tomatoes next to her head"
+    caption: "Bailey's tomatoes"
+  - src: "images/vegetable-garden/cherry-tomato.jpg"
+    alt: "Several cherry tomatoes in hand"
+    caption: "Ripe cherry tomatoes."
+  - src: "images/vegetable-garden/eggplant.jpg"
+    alt: "A plump eggplant"
+    caption: "Eggplant"
+  - src: "images/vegetable-garden/green-bell-pepper.jpg"
+    alt: "A bright green bell pepper."
+    caption: "Bell pepper."
+  - src: "images/vegetable-garden/roma-tomato.jpg"
+    alt: "3 bright red ripe Roma tomatoes"
+    caption: "Roma tomatoes"
+  - src: "images/vegetable-garden/tomato-pan.jpg"
+    alt: "Tomatoes in a pan on cooking range"
+    caption: "Making pasta sauce"
\ No newline at end of file
diff --git a/container/site/content/posts/2025-03-car-maintenance/index.md b/container/site/content/posts/2025-03-car-maintenance/index.md
new file mode 100644
index 0000000..4a1227c
--- /dev/null
+++ b/container/site/content/posts/2025-03-car-maintenance/index.md
@@ -0,0 +1,21 @@
++++
+categories = ["vehicle"]
+date = 2025-03-01T08:36:00-06:00
+description = ""
+draft = false
+slug = "2025-03-car-maintenance"
+title = "🚗 Oil Change & Engine Coolant"
+author = "nicholas"
++++
+
+Once again, I must change the oil and oil filter in my now *wife's / our* vehicle. I repeat the process documented in my previous post.
+
+## Hazard of Too *Much* Oil
+I did not do as well as I did the first time. I poured in too much oil, an amount that just submerged the entire dipstick indicator. This *could* be very bad because if the oil is reachable by the crankshaft, it would whip the oil into foam. Aerated oil does not lubricate well. Through various forums I was reassured that the level of excess oil added probably, almost certainly, would not result in any kind of engine damage or be sufficient to reach the crankshaft, but I made sure to get the level between the hatches anyway by draining some oil from the drain plug beneath the car.
+
+{{< image 
+    src="images/oil-dipstick.jpg" 
+    alt="Car engine oil dipstick indicator shows oil level is within acceptable levels"
+    caption="Perfect dipstick" >}}
+    
+It was much easier this time, as can be expected. Done.
\ No newline at end of file
diff --git a/container/site/content/posts/2025-garden/herb-garden-gallery.yaml b/container/site/content/posts/2025-garden/herb-garden-gallery.yaml
new file mode 100644
index 0000000..fc570ee
--- /dev/null
+++ b/container/site/content/posts/2025-garden/herb-garden-gallery.yaml
@@ -0,0 +1,3 @@
+
+  
+ 
diff --git a/container/site/content/posts/2025-garden/index.md b/container/site/content/posts/2025-garden/index.md
new file mode 100644
index 0000000..4a02b97
--- /dev/null
+++ b/container/site/content/posts/2025-garden/index.md
@@ -0,0 +1,29 @@
++++
+categories = ["plants"]
+date = 2025-02-20T10:30:00-06:00
+description = ""
+draft = false
+slug = "2025-garden"
+title = "🍃 2025 Garden"
+author = "nicholas"
++++
+
+It is nearly springtime as I write the first lines of this post, so it is time to prepare the gardens. This involves raising some seedlings. This year, there will be two gardens:
+  - An **herb** garden
+  - A **vegetable** garden
+
+## Starting Seeds
+{{< gallerynew name="seed-gallery" >}}
+
+## Seedlings
+The seeds were started in little clumps of coco coir pellets and kept beneath a LED grow light.
+
+{{< gallerynew name="seedling-gallery" >}}
+
+## Herb Garden
+The herb garden lives outside on the deck. It will contain garlic chives and basil. They make great pizza toppings and garnishes.
+### Garlic Chives
+### Basil
+## Vegetable Garden
+The herb garden will contain tomatoes and green onions.
+### Tomato
diff --git a/container/site/content/posts/2025-garden/seed-gallery.yaml b/container/site/content/posts/2025-garden/seed-gallery.yaml
new file mode 100644
index 0000000..eb15491
--- /dev/null
+++ b/container/site/content/posts/2025-garden/seed-gallery.yaml
@@ -0,0 +1,16 @@
+images:
+  - src: "images/garden-seeds.jpg"
+    alt: "Seed packets"
+    caption: "Seed packets"
+  - src: "images/coco-coir-pellets.JPG"
+    alt: "Coco coir pellets"
+    caption: "Coco coir pellets"
+  - src: "images/seedling-pots.JPG"
+    alt: "Seedling pots"
+    caption: "Seedling pots"
+  - src: "images/seedling-pots-filled.JPG"
+    alt: "Seedling pots filled"
+    caption: "Seedling pots filled"
+  - src: "images/seedling-tray-labels.JPG"
+    alt: "Seedling tray labels"
+    caption: "Seedling tray labels"
\ No newline at end of file
diff --git a/container/site/content/posts/2025-garden/seedling-gallery.yaml b/container/site/content/posts/2025-garden/seedling-gallery.yaml
new file mode 100644
index 0000000..c386c87
--- /dev/null
+++ b/container/site/content/posts/2025-garden/seedling-gallery.yaml
@@ -0,0 +1,10 @@
+images:
+  - src: "images/seedlings-sunlight.JPG"
+    alt: "Seedlings in the sun"
+    caption: "Seedlings in the sun"
+  - src: "images/seedlings-beneath-grow-light.JPG"
+    alt: "Seedlings under grow light"
+    caption: "Seedlings under grow light"
+  - src: "images/seedling-purple-basil.JPG"
+    alt: "Purple basil seedling"
+    caption: "Purple basil seedling"
\ No newline at end of file
diff --git a/container/site/content/posts/2025-garden/vegetable-garden-gallery.yaml b/container/site/content/posts/2025-garden/vegetable-garden-gallery.yaml
new file mode 100644
index 0000000..e69de29
diff --git a/container/site/content/posts/about.md b/container/site/content/posts/about.md
new file mode 100644
index 0000000..0ead552
--- /dev/null
+++ b/container/site/content/posts/about.md
@@ -0,0 +1,15 @@
++++
+date = 2024-03-09T03:16:57Z
+description = ""
+draft = false
+slug = "about"
+title = "About this web log"
+author = "nicholas"
++++
+
+
+This site is built with a static site generator `Hugo` with the `LoveIt` theme.
+
+This is a web log, not a blog, though the distinction exists only in my head, and serves as a way to distance myself from the word blog itself, which now seems to connote something odd I cannot quite put my finger on. Perhaps relevant is that I do not like portmanteaus. They reduce precision and create ambiguity by default. They have the feeling of whimsy and unseriousness – sort of like the product of a marketing department's monomaniacal pursuit of capturing even a tiny additional scrap of mindshare, without respect at all for the words it clumsily hot-glues together. Something like this.
+
+
diff --git a/container/site/content/posts/american-pizza/american-pizza-gallery.yaml b/container/site/content/posts/american-pizza/american-pizza-gallery.yaml
new file mode 100644
index 0000000..b00573c
--- /dev/null
+++ b/container/site/content/posts/american-pizza/american-pizza-gallery.yaml
@@ -0,0 +1,16 @@
+images:
+  - src: "images/double-decker-pizza.jpg"
+    alt: "Two pizzas stacked on top of eachother"
+    caption: "Double-decker pizza"
+  - src: "images/hawaiin-papperoni.jpg"
+    alt: "Hawaiin and pepperoni pizza"
+    caption: "Hawaiin pepperoni"
+  - src: "images/misc-pizza.jpg"
+    alt: "Pizza with a lot of toppings"
+    caption: "Misc pizza"
+  - src: "images/pepperoni-pizza.jpg"
+    alt: "Pepperoni pizza"
+    caption: "Pepperoni pizza"
+  - src: "images/sort-of-supreme-pizza.jpg"
+    alt: "Supreme pizza"
+    caption: "Sort of supreme pizza"
\ No newline at end of file
diff --git a/container/site/content/posts/american-pizza/index.md b/container/site/content/posts/american-pizza/index.md
new file mode 100644
index 0000000..c789a9c
--- /dev/null
+++ b/container/site/content/posts/american-pizza/index.md
@@ -0,0 +1,17 @@
++++
+categories = ["food"]
+date = 2024-10-16T20:27:44Z
+description = ""
+draft = false
+slug = "american-pizza"
+title = "🍕 American Pizza"
+author = "nicholas"
++++
+
+> *Get'cha pizza, it's mighty good!*
+>
+> — **Old man**, passing encounter at Sam's Club
+
+## Photos of my Pizzas
+{{< gallerynew name="american-pizza-gallery" >}}
+
diff --git a/container/site/content/posts/baltimore/baltimore-gallery.yaml b/container/site/content/posts/baltimore/baltimore-gallery.yaml
new file mode 100644
index 0000000..12701a8
--- /dev/null
+++ b/container/site/content/posts/baltimore/baltimore-gallery.yaml
@@ -0,0 +1,76 @@
+images:
+  - src: "images/architecture.JPG"
+    alt: "Architecture"
+    caption: "Architecture"
+  - src: "images/bailey-and-squirrel.JPG"
+    alt: "Bailey and squirrel"
+    caption: "Bailey and squirrel"
+  - src: "images/baltimore-from-hotel-roof.jpg"
+    alt: "Baltimore from hotel roof"
+    caption: "Baltimore from hotel roof"
+  - src: "images/baltimore-highway.jpg"
+    alt: "Baltimore highway"
+    caption: "Baltimore highway"
+  - src: "images/camden-yards.jpg"
+    alt: "Camden yards"
+    caption: "Camden yards"
+  - src: "images/conservatory-entrance.JPG"
+    alt: "Conservatory entrance"
+    caption: "Conservatory entrance"
+  - src: "images/conservatory-orchids.JPG"
+    alt: "Conservatory orchids"
+    caption: "Conservatory orchids"
+  - src: "images/conservatory.JPG"
+    alt: "Conservatory"
+    caption: "Conservatory"
+  - src: "images/koi-pond.JPEG"
+    alt: "Koi pond"
+    caption: "Koi pond"
+  - src: "images/koi-pond.JPG"
+    alt: "Koi pond"
+    caption: "Koi pond"
+  - src: "images/lighthouse.JPEG"
+    alt: "Lighthouse"
+    caption: "Lighthouse"
+  - src: "images/monument.JPG"
+    alt: "Monument"
+    caption: "Monument"
+  - src: "images/museum-painting.JPG"
+    alt: "Museum painting"
+    caption: "Museum painting"
+  - src: "images/museum-statues-room.JPG"
+    alt: "Museum statues room"
+    caption: "Museum statues room"
+  - src: "images/museum-statues.JPG"
+    alt: "Museum statues"
+    caption: "Museum statues"
+  - src: "images/orchid.JPG"
+    alt: "Orchid"
+    caption: "Orchid"
+  - src: "images/park.JPG"
+    alt: "Park"
+    caption: "Park"
+  - src: "images/peabody-library-front.JPG"
+    alt: "Peabody library front"
+    caption: "Peabody library front"
+  - src: "images/peabody-library-side.JPG"
+    alt: "Peabody library side"
+    caption: "Peabody library side"
+  - src: "images/roof-view-looking-down.JPG"
+    alt: "Roof view looking down"
+    caption: "Roof view looking down"
+  - src: "images/squirrel-munch.JPG"
+    alt: "Squirrel munch"
+    caption: "Squirrel munch"
+  - src: "images/squirrel-posing.JPG"
+    alt: "Squirrel posing"
+    caption: "Squirrel posing"
+  - src: "images/squirrel-profile.JPG"
+    alt: "Squirrel profile"
+    caption: "Squirrel profile"
+  - src: "images/stained-glass.JPG"
+    alt: "Stained glass"
+    caption: "Stained glass"
+  - src: "images/two-ducks-pond.JPG"
+    alt: "Two ducks pond"
+    caption: "Two ducks pond"
\ No newline at end of file
diff --git a/container/site/content/posts/baltimore/index.md b/container/site/content/posts/baltimore/index.md
new file mode 100644
index 0000000..029582f
--- /dev/null
+++ b/container/site/content/posts/baltimore/index.md
@@ -0,0 +1,31 @@
++++
+categories = ["travel"]
+date = 2025-06-07T12:09:00-06:00
+description = ""
+draft = false
+slug = "baltimore"
+title = "🏫 Baltimore, MD"
+author = "nicholas"
++++
+
+Bailey is enrolled in a Master's program at Johns Hopkins School of Public Health. She has been awarded a prestigious fellowship, which provides a generous stipend for school expenses and tuition paid for. The important bit is that the trip will in effect be paid for by the stipend, so I am happy to go -- I would not choose to go here otherwise. This trip is meant to satisfy part of the fellowship requirement to attend in-person courses, so it is not exactly a vacation. 
+
+`05-26-2025 to 06-06-2025`
+
+## Residence Inn
+
+{{< video
+  src="videos/residence-inn.webm"
+  width="100%"
+  autoplay="true"
+  loop="true" >}}
+
+## Fells Point walk
+{{< video
+  src="videos/fells-point-path.webm"
+  width="100%"
+  autoplay="true"
+  loop="true" >}}
+
+## Photo Gallery
+{{< gallerynew name="baltimore-gallery" >}}
diff --git a/container/site/content/posts/banoffee-pie/banoffee-pie-gallery.yaml b/container/site/content/posts/banoffee-pie/banoffee-pie-gallery.yaml
new file mode 100644
index 0000000..a171d8e
--- /dev/null
+++ b/container/site/content/posts/banoffee-pie/banoffee-pie-gallery.yaml
@@ -0,0 +1,28 @@
+images:
+  - src: "images/banoffee-pie-banana-layer.JPG"
+    alt: "Banoffee pie banana layer"
+    caption: "Banoffee pie banana layer"
+  - src: "images/banoffee-pie-bananas.JPG"
+    alt: "Banoffee pie bananas"
+    caption: "Banoffee pie bananas"
+  - src: "images/banoffee-pie-caramel-layer.JPG"
+    alt: "Banoffee pie caramel layer"
+    caption: "Banoffee pie caramel layer"
+  - src: "images/banoffee-pie-complete.JPG"
+    alt: "Banoffee pie complete"
+    caption: "Banoffee pie complete"
+  - src: "images/banoffee-pie-pecan-layer.JPG"
+    alt: "Banoffee pie pecan layer"
+    caption: "Banoffee pie pecan layer"
+  - src: "images/peel-banana.JPG"
+    alt: "Peel banana"
+    caption: "Peel banana"
+  - src: "images/slice-banana.JPG"
+    alt: "Slice banana"
+    caption: "Slice banana"
+  - src: "images/toasted-pecans.JPG"
+    alt: "Toasted pecans"
+    caption: "Toasted pecans"
+  - src: "images/white-chocolate-pumpkin-pie.jpg"
+    alt: "White chocolate pumpkin pie"
+    caption: "White chocolate pumpkin pie"
\ No newline at end of file
diff --git a/container/site/content/posts/banoffee-pie/index.md b/container/site/content/posts/banoffee-pie/index.md
new file mode 100644
index 0000000..ac335f7
--- /dev/null
+++ b/container/site/content/posts/banoffee-pie/index.md
@@ -0,0 +1,24 @@
++++
+categories = ["food"]
+date = 2025-03-01T06:27:00-06:00
+description = ""
+draft = false
+slug = "banoffee-pie"
+title = "🍌 Banoffee Pie"
+author = "nicholas"
++++
+
+We made a pumpkin caramel pie to bring for a family dinner (not pictured, strangely). Enough pie crust remained to line a shallow pizza pan, which I baked into a crust before I knew what it would become. We also had a bit of caramel leftover. After a little time considering what ingredients we had, Bailey figured we could make a decent banoffee pie. It is a beautiful accident that she had been wanting to make this after seeing it on *The Great British Bake Off*, and luckier still that we had bananas on hand.
+
+{{< gallerynew name="banoffee-pie-gallery" >}}
+
+## Recipe
+This is a lazy recipe because the food was assembled ad-hoc using leftovers of unknown measurements as is the case for many kinds of pies. I use the examples of the quiche and pie to make my point: they serve as the uniting force that brings together really any ingredient in any amount that you happen to have lying around. Details unimportant.
+
+1. Bake pie crust ~12"
+2. Pour shallow layer of wet caramel
+3. Toast about 35 pecans
+4. Cover caramel layer with one layer of toasted pecans
+5. Slice a banana into 1/4" slices
+6. Cover the pecans in layer of whipped cream
+7. Place the banana slices over the whipped cream
diff --git a/container/site/content/posts/bicycle-brakes-replacement/index.md b/container/site/content/posts/bicycle-brakes-replacement/index.md
new file mode 100644
index 0000000..ec4b918
--- /dev/null
+++ b/container/site/content/posts/bicycle-brakes-replacement/index.md
@@ -0,0 +1,134 @@
++++
+categories = ["build"]
+tags = ["bicycle"]
+date = 2025-07-04T19:00:00-05:00
+description = ""
+draft = false
+slug = "bicycle-brakes-replacement"
+title = "🚲 Bicycle Brakes Replacement"
+author = "nicholas"
++++
+
+## ⚠️ Bad Brakes
+
+The brakes on my **Trek FX 2 Disc Gen 3** are not working well, and are of low quality generally. The main problem is the front brake lever piston push rod that is meant to convey the force of the brake lever to the hydraulic fluid came free from its socket. The brake still works, provided that the linkage is carefully positioned. Otherwise if it is out of its socket, it will not link the brake lever to the hydraulic lines and there will be no braking. This is adequate, most of the time (except that the brakes need to be bled constantly and are just not very good brakes), but brakes are too important to be merely *adequate, most of the time*. Both the front and rear will be replaced. Again, not totally necessary since each of the brakes still technically work.
+
+
+{{< image src="images/rush-piston-push-rod-broken.JPG" caption="Push rod disconnected" >}}
+
+
+When we bought this bike used on Facebook Marketplace, we did not notice the brakes were different than those [specified on the Trek website](#-bike-specifications). 
+
+**From the Trek website:**
+> Trek reserves the right to change specs, models, and prices without notice.
+
+
+Supposedly, due to supply chain issues during the Covid-19 era Trek was forced to substitute the (preferred, presumably) specified Taiwanese **Tektro HD-R280** brakes for a little-known Chinese brand, formerly Taiwanese brand: **Rush**, a brand of **Ningbo C.STAR Technology Co. LTD** (??? 😟). 
+
+{{< image src="images/rush-ningbo-cstar-technology-co-ltd.png" caption="😟" >}}
+
+## 👎🏻 Old Brakes
+{{< image src="images/rush-brake-front.JPG" caption="Rush brakes - front" >}}
+{{< image src="images/rush-brake-rear.JPG" caption="Rush brakes - rear" >}}
+
+
+## ✅ New Brakes
+I will not replace them with the spec'd **Tektro HD-R280**. Instead, as far as I can tell, I will be *upgrading* to **Shimano MT201-UR300**.
+
+{{< image src="images/shimano-mt201-ur300.png" caption="Shimano MT201-UR300" >}}
+{{< image src="images/shimano-brake-front.JPG" caption="Shimano brakes - front" >}}
+{{< image src="images/shimano-brake-rear.JPG" caption="Shimano brakes - rear" >}}
+
+## 📋 Process
+I intended to document the process. I forgot. 
+
+### 🧾 Notes
+The process went smoothly except in a couple of steps. I had a few problems:
+- Tape failing while pulling the string and hose through the frame (hose coated in mineral oil hydraulic fluid makes for weak tape adhesion). 
+- String not pulling from the very center of the hose, pull angle offset from the hose angle. This offset was large enough and the margins afforded by the cable routing grommet small enough, that the hose could not pass through. 
+- Sometimes the layer of tape was too thick.
+
+My final solution involved inserting a metal coat hanger wire into the hydraulic hose, bending it into a loop and compressing the free end of the coat hanger wire into the hose, fastening the wire to the hose with friction. This allowed me to tie a string to the loop and pull the string through the frame with relative ease. It solved all of my problems. Since I had not trimmed the hydraulic line to size yet, I had much more hose than I needed and could afford to sacrifice some of it in compressing the metal loop into the hose.
+
+- Mineral oil somehow made it onto the brake pads. This caused obnoxiously loud brakes. Solved by dunking the pads in isopropyl alcohol.
+
+✅ Done.
+
+
+## 🚴‍♂️ Bike Specifications
+
+> _Applies to all sizes unless listed separately_
+
+---
+
+### **Frameset**
+
+| Component      | Specification                                                                                   |
+|----------------|-----------------------------------------------------------------------------------------------|
+| **Frame**      | Alpha Gold Aluminum, DuoTrap S compatible, internal cable routing, flat mount disc, rack & fender mounts, 135x5mm QR |
+| **Fork**       | FX Alloy, flat mount disc, rack mounts, 405 mm axle-to-crown, ThruSkew 5mm QR                 |
+
+---
+
+### **Wheels**
+
+| Component        | Specification                                                                          |
+|------------------|----------------------------------------------------------------------------------------|
+| **Front Hub**    | Formula DC-20, alloy, 6-bolt, 5x100mm QR                                               |
+| **Front Skewer** | 130x5mm QR, ThruSkew                                                                   |
+| **Rear Hub**     | Formula DC-22, alloy, 6-bolt, Shimano 8/9/10 freehub, 135x5mm QR                        |
+| **Rear Skewer**  | 152x5mm QR                                                                             |
+| **Rims**         | Bontrager Connection, double-wall, 32-hole, 20mm width, Schrader valve                 |
+| **Tires**        | Bontrager H2 Comp, wire bead, 30 TPI, 700x35mm                                         |
+| **Max Tire Size**| 700x38mm (without fenders), 700x35mm (with fenders)                                    |
+
+---
+
+### **Drivetrain**
+
+| Component          | Specification                                                 |
+|--------------------|---------------------------------------------------------------|
+| **Shifter**         | Shimano Altus M2010, 2x9 speed                                 |
+| **Front Derailleur**| Shimano Acera T3000, 34.9mm clamp, top swing, dual pull       |
+| **Rear Derailleur** | Shimano Altus M2000, long cage                                |
+| **Crank**           | Forged alloy, 46/30, chainguard, 170mm length                 |
+| **Bottom Bracket**  | Sealed cartridge, 68mm                                        |
+| **Cassette**        | Shimano HG200, 11-36T, 9-speed                                 |
+| **Chain**           | KMC X9                                                        |
+| **Pedals**          | Bontrager City Pedals                                         |
+| **Max Chainring Size** | 1x: 42T, 2x/3x: 48T                                        |
+
+---
+
+### **Components**
+
+| Component         | Specification                                                                                     |
+|-------------------|-------------------------------------------------------------------------------------------------|
+| **Saddle**         | Bontrager Sport                                                                                 |
+| **Seatpost**       | Bontrager alloy, 27.2mm, 12mm offset, 330mm length                                              |
+| **Handlebar**      | XS–M: Bontrager alloy, 31.8mm, 15mm rise, 600mm width<br>L–XXL: Bontrager alloy, 31.8mm, 15mm rise, 660mm width |
+| **Grips**          | Bontrager Satellite                                                                             |
+| **Stem**           | XS–M: Bontrager Comp, 31.8mm, Blendr compatible, 7°, 90mm<br>L–XXL: Bontrager Comp, 31.8mm, Blendr compatible, 7°, 100mm |
+| **Headset**        | 1 1/8" steel threadless                                                                          |
+| **Brake Set**      | Tektro HD-R280 hydraulic disc, flat mount, 160mm rotors                                         |
+| **Max Rotor Size** | 160mm front & rear                                                                              |
+
+---
+
+### **Weight**
+
+| Component         | Specification                    |
+|-------------------|----------------------------------|
+| **Weight (M Size)** | 11.73 kg / 25.87 lbs            |
+| **Weight Limit**    | 300 lbs (136 kg) — includes bike, rider, and cargo |
+
+---
+
+### **Additional Notes**
+
+- Trek reserves the right to change specs, models, and prices without notice.
+- Due to supply chain issues, compatible substitute parts may be used.
+- Weights listed are based on pre-production painted frames and may vary in final production.
+
+
+
diff --git a/container/site/content/posts/bicycle-pump-sprayer/index.md b/container/site/content/posts/bicycle-pump-sprayer/index.md
new file mode 100644
index 0000000..6356491
--- /dev/null
+++ b/container/site/content/posts/bicycle-pump-sprayer/index.md
@@ -0,0 +1,85 @@
++++
+categories = ["build"]
+date = 2024-10-16T20:27:44Z
+description = ""
+draft = false
+slug = "bicycle-pump-sprayer"
+title = "🚲 Bicycle Washing Contraption"
+author = "nicholas"
++++
+
+I lack a method of washing my bike that does not have the potential to disturb my neighbors. The wooden deck of my third floor apartment sits directly above each neighbors' deck. To spell it out, if I wash my bike outside on my deck, the water, soap, dirt, grit and grime that results will run off of my deck and spill onto the neighbors'. I try to be a good neighbor, so this will not do. The bathtub is not big enough, and that is no place to wash a bike anyway. There are no good options remaining – I must wash my bike outdoors.
+
+## Solutions
+Basically, my next obstacle is solving the distillation of the original problem: find a sensible way to transport water to my bike outside. My options are to take the water with me to ground level, or feed it down through a hose.
+
+### Hose
+I can run a hose from the kitchen faucet, or the supply line, to the ground level, snaking it through the back door and beneath the deck to the ground. This can work alright, but the solution presents several issues. It requires that I buy a 50 foot hose, a faucet adapter, and a nozzle. Additionally, each time I wash my bike I need to remove the faucet nozzle, attach the adapter, attach the hose, unwind the hose, route it through the apartment and onto the ground and finally turn on the faucet. And when I am done I need to do it all again in reverse, all while the kitchen sink is out of commission for any other purpose. I could attach the hose to the water line that feeds the kitchen faucet, but this only solves the concurrent use issue. There is the problem of stagnant water sitting in the hose, which itself does not present a problem necessarily, but I fear this may smell or somehow corrupt the atmosphere in the apartment. Also, I need to leave the door open to unwelcome bugs, humidity, and changes in temperature. There are many issues I have not thought of. This is not a great option.
+
+### Pump Sprayer
+My next option is a plastic pump sprayer. Theoretically this solves or addresses every issue with option 1. No open doors or fiddling with adapters or routing hoses around the apartment. The only problem seems to be that the cheap ones are universally terrible products, at least according to a worrying portion of the reviews. Their problem is that they are prone to leaking and have durability issues. This is not a big deal, but I believe I have a more robust solution. I have mostly everything I need to fashion a pump sprayer of my own.
+
+###  Bike Pump and a Keg (winner)
+#### Topo Chico solved my problem years ago
+I am fond of the carbonated beverage Topo Chico. During the initial phase of my obsession I tried to find a way to recreate it myself. To shorten what could be another log post, this decision lead me down a path resulting in me owning all the equipment necessary to carbonate and dispense my own beverages. For years I had all the carbonated water I could drink, fresh and cold on a tap. I cannot remember why I stopped making it. The city water supply was full of minerals, too. Pretty close:
+
+
+{{< image 
+    src="images/topo-chico-minerals.PNG" 
+    caption="Topo Chico minerals" >}}
+    
+{{< image 
+    src="images/city-minerals.PNG" 
+    caption="City minerals" >}}
+
+#### Keg
+Importantly though, my Topo Chico reproduction means I own a keg. Inside the keg there is a long tube that runs from the bottom of the tank to an outlet valve. The inlet valve accepts gas, that, when pressurized (with, for example, a bike pump), pushes the liquid up the straw, out the valve, and through the hose. Under the water-carbonation regime, the keg pressure is supplied by a carbon dioxide tank and regulator, but the pump will perform the same functions. All I need to do is find a way to pump air into the inlet valve – everything else is already suitably configured. The keg holds 1.6 L of water, which I have found, to the eye and on paper, a deceivingly large volume of water. Enough to get the job done, but not more.
+
+## Parts
+| Part                                                 | Purpose                                                                        |
+| ---------------------------------------------------- | ------------------------------------------------------------------------------ |
+| 1.6 L Ball Lock Keg                                  | Pressurized Water Vessel                                                       |
+| Worm Drive Hose Clamp                                | Fasten hoses to barbs                                                          |
+| Bicycle Pump                                         | Pressurize water vessel                                                        |
+| 1/4" M Threaded Snifter (Schrader) Air Valve Fitting | Valve interfaces with bicycle pump, fitting threads into barb fitting          |
+| 1/4" F Threaded Barb Fitting                         | Barb accepts 5/16" gas line, fitting threads accepts Schrader valve fitting    |
+| 5/16" ID Gas hose                                    | Carries pressurized air from bicycle pump through ball lock valves, to the keg |
+| 3/16" ID Liquid Hose                                 | Carries pressurized water from keg through ball lock valves, to picnic valve   |
+| Picnic Faucet                                        | Dispense water                                                                 |
+
+{{< image 
+    src="images/picnic-faucet.jpg" 
+    caption="Picnic faucet & hose" >}}
+
+All of the parts listed above I already had. I only needed the two fittings below. I bought these parts at a local Ace Hardware store. The barb fits into the gas hose, which has an inner diameter that matches the outer diameter of the barb. This fitting is secured with a worm drive clamp. This is a common configuration for securing gas tubing to metal fittings. The other end of the barb is a 1/4" female threaded fitting, which accepts the 1/4" male thread of the Schrader valve. Each of these fittings fall under the National Pipe Thread standard, so I do not need to worry about thread pitch, TPI, etc. I simply match the relevant numbers up. I use a bit of teflon tape to ensure air tight fit.
+
+The other end of the gas tube is fitted with a female ball lock valve, which accepts the male ball lock valve that is affixed to the keg. The ball lock valve is common in home/craft beer brewing systems and other small scale beverage production. It is excellent for quickly connecting/disconnecting and thus for my purpose of modularity and convenience.
+
+{{< image 
+    src="images/barb.PNG" 
+    caption="Barb" >}}
+
+{{< image 
+    src="images/valve.PNG" 
+    caption="Valve" >}}
+
+{{< image 
+    src="images/ball-lock-schrader.jpg" 
+    caption="ball lock" >}}
+
+## Result
+The resulting contraption is a modular, robust, lightweight and small package. I tested this out on my moderately dirtied bike, and the only issue I noticed was that, obviously, I did not have a lot of water. In the end, I did have enough water, but not enough to have an entirely comfortable margin for error. This small sacrifice is well worth the the convenience the solution affords me. I am pleased with the results.
+
+{{< image 
+    src="images/full-assembly.jpg" 
+    caption="Keg pump sprayer" >}}
+
+{{< image 
+    src="images/full-assembly-air-pump.jpg" 
+    caption="Keg pump sprayer with pump attached" >}}
+
+{{< image 
+    src="images/full-assembly-packed.jpg" 
+    caption="Keg pump sprayer ready to go" >}}
+    
+Done.
\ No newline at end of file
diff --git a/container/site/content/posts/burrito/index.md b/container/site/content/posts/burrito/index.md
new file mode 100644
index 0000000..c8ba5a1
--- /dev/null
+++ b/container/site/content/posts/burrito/index.md
@@ -0,0 +1,64 @@
++++
+categories = ["food"]
+date = 2024-04-27T05:12:13Z
+description = ""
+draft = false
+slug = "burrito"
+title = "🌯 Burritos in Bulk"
+author = "nicholas"
++++
+
+## About this post
+This is shallow dive into the mass production of homemade burritos. This recipe is designed to achieve a pareto-optimal mix of taste, simplicity, and cost-efficiency. The ingredients are few, the measurements exact and scalable.
+
+##  Not Reinventing the Wheel
+I used Taco Bell's ingredient labels and nutrition information to derive my own bean, rice, and beef recipe, mostly because it is fun to reverse-engineer foods that taste good. Taco Bell's success and veritable midwestern monopoly on Mexican-style fast-food is evidence enough of them having found their own kind of optimum. Yes, they have far more considerations than I do – supply chains / logistics, storage, shelf life, labor efficiency, ingredient availability, and profitability – so I may have reverse-engineered this burrito that exists in its particular form for reasons beyond my comprehension or utility, and in a manner much like a cargo-cult, but I have nothing better to aim at as I love their burritos.
+
+
+## Burrito Components - The Holy Quintet
+Just five entities compose the divine essence of **the burrito**.
+
+### Tortilla
+I use a supermarket ~10" burrito-style flour tortilla. At this time I have no desire to even attempt making 35 burrito tortillas.
+
+**UPDATE**: I made some excellent very large Chipotle-like burritos and they are very good.
+
+### Beans
+The beans that result of the recipe are semi-solid, or, the consistency of something like a firm yogurt when at refrigeration temperatures. I tried two methods of applying the beans to the burrito. I tried to extrude the beans out of a pastry bag with a roughly 0.5" nozzle. This worked alright, but refilling the bag was a bigger mess than I was attempting to avoid by scooping, which brings me to the second method. I had a gigantic bowl of beans and scooped them onto the burrito. They are pinto beans with some salt, lard, and some seasonings.
+
+### Beef
+I use the cheapest ground beef I can find, on the as-yet unproven but theoretically trivially easy to prove assumption that it produces the most lean meat per unit cost. In the mean time I reserve the belief that it was worth it in any case for the tallow I collect, a belief which I will deploy as a sort of coping mechanism if I find out I have gotten unlucky with my unusually lazy reasoning. It is just for fun. 
+
+**UPDATE**: I now have more beef fat and money saved than I know what to do with.
+
+### Rice
+I use a rice cooker to cook long-grain white rice. I am not sure of the variance in recommended ratios of rice and water between rice cooker models, but after the cooking process is finished, all should result in cooked rice with similar ratios. Thus, substituting my own water weight measurement for any other should result in similar rice to this. This is something I have not put much thought into – ultimately almost certainly unimportant.
+
+### Cheese
+I take a block of sharp cheddar cheese, divide it into sticks that can fit into the port on my food processor, and shred it into heaps and mounds. There is no recipe!
+
+
+## Assembly
+Each ~10" tortilla can accommodate at most ~8 oz. of filling. I generally aim to fill each with the following amounts:
+
+| Ingredient | Weight (oz.) |
+| ---------- | ------------ |
+| beans      | 2.25         |
+| beef       | 2.25         |
+| rice       | 2.25         |
+| cheese     | 1.0          |
+
+## Final Product
+
+{{< image 
+    src="images/burritos.jpg" 
+    caption="Burrito Stack, do not bother counting, there are more out of frame" >}}
+
+Reheat from frozen takes ~45" @ 450 F convection. Wrapped tightly in aluminum foil
+
+
+
+
+
+
+
diff --git a/container/site/content/posts/car-maintenance-brakes/index.md b/container/site/content/posts/car-maintenance-brakes/index.md
new file mode 100644
index 0000000..b3ae1aa
--- /dev/null
+++ b/container/site/content/posts/car-maintenance-brakes/index.md
@@ -0,0 +1,30 @@
++++
+categories = ["vehicle"]
+date = 2024-10-01T02:49:01Z
+description = ""
+draft = true
+slug = "brake-pad-replacement"
+title = "🔧 Brake Pad + Rotor Replacement"
+
++++
+
+This task is not urgent and will not be complete any time soon. This log entry will take shape progressively as I ramp up to actually doing the thing. In my last post relating to car maintenance I mention the gruesome prospect of having my skull crushed between a thick slab of concrete and thousands of pounds of steel after the pinch welds of a twenty year old car give way. In this post I will take pains to avoid this. This time I cannot use the sturdy stout plastic ramp, I must use the `skull-crusher 9000` model jack stands. The front wheels of the vehicle must be suspended in the air so that I can remove them to access the brake pads. The car will be on jack stands, and part of my body will technically be underneath the car, but dear reader be assured that I plan to avoid putting my head between the car and the concrete as much as possible. This is how I win.
+
+
+## Replacing Brake Pads
+
+The process for removing and replacing the pads is the more straightforward of the two maintenance tasks, requiring a short list of supplies:
+
+
+* 3/8" drive 10mm hex socket
+* Gloves
+* Jack stand (2)
+* Trolley jack
+* Flat head screw driver
+
+The process is simple and I have not bothered to outline it yet. That is all I know for now. Stay tuned.
+
+
+## Replacing Brake Rotors
+
+The process for removing and replacing rotors is not straightforward! Stay tuned.
\ No newline at end of file
diff --git a/container/site/content/posts/dc-nyc/dcnyc.yaml b/container/site/content/posts/dc-nyc/dcnyc.yaml
new file mode 100644
index 0000000..2269b02
--- /dev/null
+++ b/container/site/content/posts/dc-nyc/dcnyc.yaml
@@ -0,0 +1,103 @@
+images:
+  - src: "images/bailey-outside-train-station.JPG"
+    alt: "bailey outside train station"
+    caption: "Bailey outside train station"
+  - src: "images/boat.JPG"
+    alt: "boat"
+    caption: "Boat"
+  - src: "images/cat-bed.JPG"
+    alt: "cat bed"
+    caption: "Cat bed"
+  - src: "images/dc-capitol-building-distant-i.JPG"
+    alt: "dc capitol building distant i"
+    caption: "DC Capitol Building Distant I"
+  - src: "images/dc-capitol-building-distant-ii.JPG"
+    alt: "dc capitol building distant ii"
+    caption: "DC Capitol Building Distant II"
+  - src: "images/dc-hotel-room.JPG"
+    alt: "dc hotel room"
+    caption: "DC Hotel Room"
+  - src: "images/dc-national-mall.JPG"
+    alt: "dc national mall"
+    caption: "DC National Mall"
+  - src: "images/francis-scott-key-bridge-distant.JPG"
+    alt: "francis scott key bridge distant"
+    caption: "Francis Scott Key Bridge Distant"
+  - src: "images/francis-scott-key-bridge-two.JPG"
+    alt: "francis scott key bridge two"
+    caption: "Francis Scott Key Bridge Two"
+  - src: "images/francis-scott-key-bridge.JPG"
+    alt: "francis scott key bridge"
+    caption: "Francis Scott Key Bridge"
+  - src: "images/helicopter.JPG"
+    alt: "helicopter"
+    caption: "Helicopter"
+  - src: "images/museum-natural-history.JPG"
+    alt: "museum natural history"
+    caption: "Museum Natural History"
+  - src: "images/norman-kitchen.JPG"
+    alt: "norman kitchen"
+    caption: "Norman Kitchen"
+  - src: "images/nyc-amtrak.JPG"
+    alt: "nyc amtrak"
+    caption: "NYC Amtrak"
+  - src: "images/nyc-map.JPG"
+    alt: "nyc map"
+    caption: "NYC Map"
+  - src: "images/nyc-mikayla-apt-kitchen.JPG"
+    alt: "nyc mikayla apt kitchen"
+    caption: "NYC Mikayla Apt Kitchen"
+  - src: "images/nyc-mikayla-apt-window.JPG"
+    alt: "nyc mikayla apt window"
+    caption: "NYC Mikayla Apt Window"
+  - src: "images/nyc-train.JPG"
+    alt: "nyc train"
+    caption: "NYC Train"
+  - src: "images/obelisk.JPG"
+    alt: "obelisk"
+    caption: "Obelisk"
+  - src: "images/outside-train-station-fire-trucks.JPG"
+    alt: "outside train station fire trucks"
+    caption: "Outside Train Station Fire Trucks"
+  - src: "images/outside-train-station.JPG"
+    alt: "outside train station"
+    caption: "Outside Train Station"
+  - src: "images/pigeon-closeup.JPG"
+    alt: "pigeon closeup"
+    caption: "Pigeon Closeup"
+  - src: "images/police-boat.JPG"
+    alt: "police boat"
+    caption: "Police Boat"
+  - src: "images/police.JPG"
+    alt: "police"
+    caption: "Police"
+  - src: "images/saxaphone-man.JPG"
+    alt: "saxophone man"
+    caption: "Saxophone Man"
+  - src: "images/seagull.JPG"
+    alt: "seagull"
+    caption: "Seagull"
+  - src: "images/squirrel-eating-trash-II.JPG"
+    alt: "squirrel eating trash ii"
+    caption: "Squirrel Eating Trash II"
+  - src: "images/squirrel-eating-trash.JPG"
+    alt: "squirrel eating trash"
+    caption: "Squirrel Eating Trash"
+  - src: "images/train-station-christmas-tree-flags.JPG"
+    alt: "train station christmas tree flags"
+    caption: "Train Station Christmas Tree Flags"
+  - src: "images/train-station-christmas-tree.JPG"
+    alt: "train station christmas tree"
+    caption: "Train Station Christmas Tree"
+  - src: "images/very-long-escalator-dc.JPG"
+    alt: "very long escalator dc"
+    caption: "Very Long Escalator DC"
+  - src: "images/willard-intercontinental.JPG"
+    alt: "willard intercontinental"
+    caption: "Willard Intercontinental"
+  - src: "images/wwii-memorial-ii.JPG"
+    alt: "wwii memorial ii"
+    caption: "WWI Memorial II"
+  - src: "images/wwii-memorial.JPG"
+    alt: "wwii memorial"
+    caption: "WWI Memorial"
\ No newline at end of file
diff --git a/container/site/content/posts/dc-nyc/index.md b/container/site/content/posts/dc-nyc/index.md
new file mode 100644
index 0000000..e7929ea
--- /dev/null
+++ b/container/site/content/posts/dc-nyc/index.md
@@ -0,0 +1,16 @@
++++
+categories = ["travel"]
+date = 2024-12-29T00:00:00Z
+description = ""
+draft = false
+slug = "dc-nyc"
+title = "🏛️ Washington, D.C & 🗽New York City, NY"
+author = "nicholas"
++++
+
+We went to Washington, D.C. for the [Bloomberg Public Health Summit](https://americanhealth.jhu.edu/2024-bloomberg-american-health-summit) Bailey was invited to attend. We also stopped by NYC.
+
+
+
+## Photos
+{{< gallerynew name="dcnyc" >}}
\ No newline at end of file
diff --git a/container/site/content/posts/dominos-garlic-oil-blend/index.md b/container/site/content/posts/dominos-garlic-oil-blend/index.md
new file mode 100644
index 0000000..65f885b
--- /dev/null
+++ b/container/site/content/posts/dominos-garlic-oil-blend/index.md
@@ -0,0 +1,22 @@
++++
+categories = ["food"]
+tags = ["reverse-engineer","dominos"]
+date = 2024-10-22T21:26:10Z
+description = ""
+draft = true
+slug = "dominos-garlic-oil-blend"
+title = "🧄 Domino's Garlic Oil Blend"
+author = "nicholas"
++++
+
+{{< image
+  src="images/crisco-ingredient-list.PNG"
+  caption="Crisco ingredient list" >}}
+  
+{{< image
+  src="images/dominos-garlic-oil-blend-ingredient-list.jpeg"
+  caption="Domino's Garlic Oil Blend ingredient list" >}}
+  
+{{< image
+  src="images/dominos-garlic-oil-blend-nutrition.jpeg"
+  caption="Domin's Garlic Oil Blend nutrition" >}}
diff --git a/container/site/content/posts/dynamic-dns/images/architecture.png b/container/site/content/posts/dynamic-dns/images/architecture.png
new file mode 100644
index 0000000..281e496
--- /dev/null
+++ b/container/site/content/posts/dynamic-dns/images/architecture.png
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:3f83efa96e3aad29683f39696534e42371dccd87a4869baa57661b45ac1996d5
+size 90731
diff --git a/container/site/content/posts/dynamic-dns/images/aws-cloudshell-newrecord.py.jpg b/container/site/content/posts/dynamic-dns/images/aws-cloudshell-newrecord.py.jpg
new file mode 100644
index 0000000..cbd99a1
--- /dev/null
+++ b/container/site/content/posts/dynamic-dns/images/aws-cloudshell-newrecord.py.jpg
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:8f7ed6e83768b19ea7bcf3c8118c8154a70b5afeb09766cfbf494697673d552d
+size 281554
diff --git a/container/site/content/posts/dynamic-dns/images/aws-cloudshell.jpg b/container/site/content/posts/dynamic-dns/images/aws-cloudshell.jpg
new file mode 100644
index 0000000..06a918e
--- /dev/null
+++ b/container/site/content/posts/dynamic-dns/images/aws-cloudshell.jpg
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:d7ac2a3b41a77cb74f848468aeae445c05afc30814d31af15c2c9d51ff0b95c7
+size 22809
diff --git a/container/site/content/posts/dynamic-dns/index.md b/container/site/content/posts/dynamic-dns/index.md
new file mode 100644
index 0000000..56067af
--- /dev/null
+++ b/container/site/content/posts/dynamic-dns/index.md
@@ -0,0 +1,71 @@
++++
+categories = ["software"]
+tags = ["dns"]
+date = 2025-02-16T00:00:00Z
+description = ""
+draft = false
+slug = "dynamic-dns"
+title = "🌐 Dynamic DNS"
+author = "nicholas"
++++
+
+I have a public IP assigned by my ISP, but it is not *static*, and is therefore subject to change at their whim. This is no good, since I like to be able to access my devices from beyond my local network, and any change in my public IP address will result in misconfigured DNS. A disaster. I need a way to be sure that my any change in my public IP address will trigger an automatic reconfiguration of certain DNS records. I am using AWS Route 53 for my DNS provider, and luckily there is a handy resource available [`route53-dynamic-dns-with-lambda`](https://aws.amazon.com/blogs/startups/how-to-build-a-serverless-dynamic-dns-system-with-aws/) which perfectly suits my need for DDNS.
+
+### Route 53 Dynamic DNS with Lambda
+Rather than rehash all of the steps covered in the documentation for this tool, I will simply cover the broad strokes of the process and configuration. The repository linked above basically comes with an installer that walks the user through a few steps to automatically configure the DDNS. The user is left with a simple script that will update the Route 53 DNS records any time the sender IP address changes. This is explained pictographically below.
+
+{{< image 
+    src="images/architecture.png" 
+    caption="Route 53 Dynamic DNS with Lambda" >}}
+
+#### AWS CloudShell
+{{< image 
+    src="images/aws-cloudshell.jpg" 
+    caption="AWS Cloudshell" >}}
+
+The guide recommends deploying their Cloud Development Kit using AWS CloudShell session, so this is what I do. The process amounts to cloning the git repo `route53-dynamic-dns-with-lambda`, running the `newrecord.py` script contained therein, and following the directions in the CLI bootstrap wizard. The process is basically:
+- clone the repo
+- change directory to the repo
+- install the CDK
+- run `newrecord.py`
+
+{{< image 
+    src="images/aws-cloudshell-newrecord.py.jpg" 
+    caption="newrecord.py" >}}
+
+#### Generate Configuration File
+The last step of the install wizard isa prompt appears to confirm all of the settings. 
+
+```bash
+##############################################
+#                                            #
+# The following configuration will be saved: #
+#                                            #
+  Host name:  www.uuard.com
+  Hosted zone id: ZYZ12345678901234
+  Record set TTL: 60
+  Secret: SHARED_SECRET_123
+#                                            #
+#      do you want to continue? (y/n)        #
+#                                            #
+##############################################
+```
+
+
+And finally the following message is produced, along with a `dyndns.sh` script.
+> This can be run via a CRON or SystemD timer to periodically update your hostname.
+
+```
+#####################################################
+#                                                   #
+# The Serverless Dynamic DNS solution is now ready. #
+#                                                   #
+#####################################################
+
+www.uuard.com can be updated with the following command:
+./dyndns.sh -m set -u https://xyz1234567890xyz.lambda-url.eu-west-1.on.aws/ -h www.uuard.com -s SHARED_SECRET_123
+```
+
+The only thing left to be done is to move the provided `dyndns.sh` script to my server and set up a `cron` job. I chose to run my script each week “At 00:00 on Sunday” (`0 0 * * 0`).
+
+Done.
\ No newline at end of file
diff --git a/container/site/content/posts/earl-grey-cake/earl-grey-gallery.yaml b/container/site/content/posts/earl-grey-cake/earl-grey-gallery.yaml
new file mode 100644
index 0000000..42fadaf
--- /dev/null
+++ b/container/site/content/posts/earl-grey-cake/earl-grey-gallery.yaml
@@ -0,0 +1,34 @@
+images:
+  - src: "images/cake-piped-and-filled.JPG"
+    alt: "cake piped and filled"
+    caption: "Cake piped and filled"
+  - src: "images/cake-slices.JPG"
+    alt: "cake slices"
+    caption: "Cake slices"
+  - src: "images/cake-tier-two.JPG"
+    alt: "cake tier two"
+    caption: "Cake Tier Two"
+  - src: "images/cake-topped.JPG"
+    alt: "cake topped"
+    caption: "Cake Topped"
+  - src: "images/cakes-baked-removing.JPG"
+    alt: "cakes baking removing"
+    caption: "Cakes Baked Removing"
+  - src: "images/cakes-baking.JPG"
+    alt: "cakes baking"
+    caption: "Cakes Baking"
+  - src: "images/cakes-leveled.JPG"
+    alt: "cakes leveled"
+    caption: "Cakes Leveled"
+  - src: "images/earl-grey-syrup.JPG"
+    alt: "earl grey syrup"
+    caption: "Earl Grey Syrup"
+  - src: "images/mixed-berry-filling.JPG"
+    alt: "mixed berry filling"
+    caption: "Mixed Berry Filling"
+  - src: "images/mixing-bowl-spatula.JPG"
+    alt: "mixing bowl spatula"
+    caption: "Mixing Bowl Spatula"
+  - src: "images/powdered-sugar-sift.JPG"
+    alt: "powdered sugar sift"
+    caption: "Powdered Sugar Sift"
\ No newline at end of file
diff --git a/container/site/content/posts/earl-grey-cake/index.md b/container/site/content/posts/earl-grey-cake/index.md
new file mode 100644
index 0000000..71bc42a
--- /dev/null
+++ b/container/site/content/posts/earl-grey-cake/index.md
@@ -0,0 +1,14 @@
++++
+categories = ["food"]
+date = 2025-01-05T00:00:00Z
+description = ""
+draft = false
+slug = "earl-grey-cake"
+title = "👑 Earl Grey Cake with Mixed Berry Filling"
+author = "nicholas"
++++
+
+Bailey made a cake, and I took some photos since her creations are always very beautiful. Nothing else going on here!
+
+## Photos
+{{< gallerynew name="earl-grey-gallery" >}}
\ No newline at end of file
diff --git a/container/site/content/posts/egg-replacer/index.md b/container/site/content/posts/egg-replacer/index.md
new file mode 100644
index 0000000..405d0f0
--- /dev/null
+++ b/container/site/content/posts/egg-replacer/index.md
@@ -0,0 +1,97 @@
++++
+categories = ["food"]
+date = 2025-02-28T10:46:00-06:00
+description = ""
+draft = false
+slug = "egg-replacer"
+title = "🥚 Egg Replacer"
+author = "nicholas"
++++
+
+Eggs are ~ $0.50 / egg, which is far too high a price to pay. This presents a fun opportunity to attempt a recipe using a custom formulation of egg replacer. The purpose of an egg can be many: to provide structure, leavening, moisture, and richness (fat). My goal is to formulate a substitute that, at least on paper, will replace the function of an egg using ingredients that are cheaper than an egg.
+
+## Commercial Egg Replacers
+I chose the first two commercial egg replacers with easily-discoverable nutrients and ingredients that I found for my quick analysis. 
+### ingredients
+The ingredient lists below show similarities between two different manufacturers' egg replacer formulations. Both contain leavening agents and thickening starches.
+
+{{< image 
+    src="images/ingredients_egg-replacer_franklin-farms-east.PNG" 
+    caption="Franklin Farms East" >}}
+
+{{< image 
+    src="images/ingredients_egg-replacer_bobs-red-mill.PNG" 
+    caption="Bob's Red Mill" >}}
+
+### Instructions
+Their instructions for use are also the same. This reassures me that egg replacement is a solved problem, as it is widely commercially available and thus viable to its consumers. 
+
+{{< image 
+    src="images/instructions_egg-replacer_bobs-red-mill.PNG" 
+    caption="Bob's Red Mill Instructions" >}}
+
+## Comparison to an actual egg
+According to the instructions provided by Bob's Red Mill and Franklin Farms East, one egg can be replaced with 1 Tbsp. `Egg Replacer` combined with 2 Tbsp. water. I will convert the volume measurements to weight measurements so that I can more easily compare them to an actual egg. Since 1 Tbsp. water weighs 15 grams, and one Tbsp. egg replacer weighs ~ 10 grams, the total weight or both egg replacement formulas is 45 grams.
+
+| **Product**                          | **Weight (g)** | **Water (%)** |
+| ------------------------------------ | -------------- | ------------- |
+| **Eggs, Grade A, Large, egg whole**  | 50             | 76            |
+| **Bob's Red Mill Egg Replacer**      | 45             | 67            |
+| **Franklin Farms East Egg Replacer** | 45             | 67            |
+
+
+## Egg nutrients per 100 g
+
+| **Nutrient**                | **Average Amount** | **Unit** |
+| --------------------------- | ------------------ | -------- |
+| Water                       | 75.8               | g        |
+| Energy                      | 147                | kcal     |
+| Protein                     | 12.4               | g        |
+| Total lipid (fat)           | 9.96               | g        |
+| Carbohydrate, by difference | 0.96               | g        |
+| Carbohydrate, by summation  | 0.2                | g        |
+| Fiber, total dietary        | <0.75              | g        |
+| Sugars, Total               | 0.2                | g        |
+
+## Adding fat (lecithin)
+Commercial egg replacers often exclude fat. I do not know the reasons for this exclusion, since eggs contain around 10% fat by weight. Maybe for shelf-stability, cost reduction, maximizing versatility. Fat has a shorter shelf-life, and is relatively expensive compared to starches and gums. Egg replacers often require processing the product in the end anyway: one must add water, mix, wait, etc. If adding fat is important, the user will add it themselves. Perhaps some of this reasoning is correct, I do not know. I intend to add some fat.
+
+I will add fat in part through the addition of liquid sunflower lecithin. This sort of kills two birds with one stone: I will replace some of the missing fat (lecithin is made of phospholipids, a type of fat), and introduce the absent emulsifier (eggs are known to be great natural emulsifiers because their yolk contains lecithin). Since I am missing around 5 grams of weight between the water and fat, I will add around 1 gram of soy lecithin.
+
+## Adding leavening (baking powder)
+I want to use baking powder in my formulation. This is what Franklin Farms East uses, and if it is good enough for them, it ought to be good enough for me. Also, it is convenient that I can make an estimate of how much baking powder is present in the egg replacer by deriving the value from the amount of sodium present. I need to determine how much baking powder is in the 100 g egg replacer mixture, given that it contains **170 mg of sodium**.  
+
+Baking powder (sodium acid pyrophosphate, sodium bicarbonate, etc.) contains sodium, obviously. Without having to do any complicated chemistry algebra, I can go directly to the source, at the nutrition label of baking powder, to see how much sodium is present in a given quantity. This image is from Bob's Red Mill baking powder. It contains **16059.37 mg** per 100 g of baking soda, or, **161 mg / g**. 
+
+{{< image 
+    src="images/baking-powder-sodium_bobs-red-mill.PNG" 
+    caption="Baking Powder Sodium" >}}
+    
+### Calculating baking powder
+
+Let **$x$** be the amount of baking powder needed (in grams):  
+
+$$
+170 \text{ mg} = x \times 161 \text{ mg/g}
+$$
+
+$$
+x = \frac{170}{161} \approx 1.06 \text{ g}
+$$
+
+To obtain **170 mg of sodium** in the final mixture, I need **1.06%**  baking powder by weight.
+
+## Formulation
+Thus I arrive at my final formula, ready to test in a cake recipe.
+
+**Ingredient Percentage and Amounts**
+| ingredient                | %       | amount (g) |
+| ------------------------- | ------- | ---------- |
+| Water                     | 65.00%  | 32.5       |
+| Tapioca Starch            | 18.50%  | 6.0125     |
+| Oil \ fat                 | 12.00%  | 6.00%      |
+| Liquid Sunflower Lecithin | 3.00%   | 1.50       |
+| Baking Powder             | 1.50%   | 0.4875     |
+| **TOTAL**                 | 100.00% | 50         |
+
+Done.
\ No newline at end of file
diff --git a/container/site/content/posts/email-alerts/index.md b/container/site/content/posts/email-alerts/index.md
new file mode 100644
index 0000000..df040ac
--- /dev/null
+++ b/container/site/content/posts/email-alerts/index.md
@@ -0,0 +1,306 @@
++++
+categories = ["software"]
+tags = ["automation"]
+date = 2024-06-18T02:47:45Z
+description = ""
+draft = false
+slug = "email-alerts"
+title = "📧 Email Alerts with Postfix & Amazon SES"
+author = "nicholas"
++++
+
+I have many jobs on a server that run on a schedule using `cron` jobs. I would like to be notified when these jobs succeed, and especially when they fail. I will send and receive these alerts through email.Since it is impractical to run one's own email server in 2024, I am using AWS SES (Amazon Web Services - Simple Email Service) to send the emails. I do not write anything about this here.
+
+## Prerequisites
+There are a few parts to configure to get the machine working.
+- Email server
+- `postfix`
+- `mailutils`
+
+## Postfix
+This may prompt configuration GUI (`dpkg-reconfigure postfix`) in the terminal. Select "No configuration".
+
+### Create auth file
+An auth file is needed to store credentials before hashing.
+```bash
+sudo apt install postfix
+sudo nano /etc/postfix/aws_ses_sasl
+```
+
+`SMTP_USERNAME` (SES Access Key for IAM User) and corresponding SMTP_PASSWORD, e.g.:
+
+```
+[email-smtp.us-east-2.amazonaws.com]:587 VMHPJVEZMOQJLJMPCHX:WF62TVHpGhqObyn2RvCb92sVxTP5OiihL3IvRmivHRk4j
+```
+
+Now, I use the postmap tool to generate a hashed database file that will eventually be used by Postfix to authenticate to the remote SMTP email server. It will output a .db file of the same name as the input file – in this case, `aws_ses_sasl.db`.
+
+```shell
+sudo postmap hash:/etc/postfix/aws_ses_sasl
+```
+
+### Create postfix configuration file
+The auth file created above is referenced in the Postfix configuration file `main.cf` that is created below.
+
+```shell
+sudo nano /etc/postfix/main.cf
+```
+
+The last line above references a hashed database file. This file allows me to map my local email addresses to other addresses.
+
+```sh
+relayhost = [email-smtp.us-east-2.amazonaws.com]:587
+smtp_sasl_auth_enable = yes
+smtp_sasl_security_options = noanonymous
+smtp_sasl_password_maps = hash:/etc/postfix/aws_ses_sasl
+smtp_use_tls = yes
+smtp_tls_security_level = encrypt
+smtp_tls_note_starttls_offer = yes
+smtp_generic_maps = hash:/etc/postfix/generic
+```
+
+### Alias Configuration
+Server-generated email are by default sent to email address `{user}@{hostname}.localdomain`. I need to change this by configuring an alias for users `root` and `nicholas` in `/etc/aliases` so that all emails will be forwarded to my personal email instead of just ending up unread in my syslog.
+
+```shell
+sudo nano /etc/aliases
+```
+
+```shell
+root: nicholas@email.com
+nicholas: nicholas@email.com
+```
+
+### Create `generic` file
+This will configure the sender address. Emails sent from the system will appear to be sent from the emails named here.
+
+```shell
+sudo nano /etc/postfix/generic
+```
+
+#### `generic`
+
+```
+root@server.localdomain example@example.com
+nicholas@server.localdomain example@example.com
+```
+
+#### Create hash database file
+
+```shell
+sudo postmap hash:/etc/postfix/generic
+```
+
+### Restart Postfix
+
+```shell
+sudo service postfix restart
+```
+
+### Test Email
+I want to test whether I have configured the email system correctly. I will need `mailutils`.
+
+```shell
+sudo apt install mailutils
+```
+
+I can set some variables in the shell to reference in a command:
+```shell
+email_body="test email body"
+email_subject="test email subject"
+email_to="test@example.com"
+email_from="alerts@uuard.com"
+```
+
+Now I attempt to send the email.
+
+```shell
+echo "${email_body}" | mail -s "${email_subject}" -r "${email_from}" "${email_to}"
+```
+
+I check the mail log to verify the email was sent.
+
+```shell
+sudo cat /var/log/mail.log | grep to=
+2024-06-17T19:30:17.705051-05:00 nas postfix/smtp[3797056]: D9D331661A14: to=, relay=email-smtp.us-east-2.amazonaws.com[3.22.8.243]:587, delay=0.82, delays=0.01/0/0.56/0.25, dsn=2.0.0, status=sent (250 Ok 010f019028c06bff-df62265f-49b2-4920-b73a-8a7e4b362f2c-000000)
+```
+
+Notice the `250 Ok`. This means the email was sent successfully. This is confirmed when I check my email inbox, which shows the email has been delivered:
+
+{{< image 
+    src="images/email-success.png" 
+    caption="Test Email" >}}
+
+## Shell Scripts
+As I mentioned before, the purpose of configuring the system to send mail is to alert me to the outcome of the execution of scheduled jobs. To do this, I will create shell scripts for each job, within which will contain logic to send custom emails containing information that might be interesting to me.
+
+I have a file `test.txt` that I output using `cat` command. Both the command and the output will be captured by the script, and the script will use the `mailutils` package `mail` command to send this over email. Here is what happens when I run the command manually:
+
+### Formatting emails
+The email I sent is not very pretty, and the lack of formatting will result in a nigh unreadable jumble of text if a job produces an error. I want to be able to quickly discern what and why a job failed, so I will format my emails.
+
+The idea is to separate the command that resulted in exix code indicating error, from the error itself. To test this, I will use `cat` as the command, and the contents of a text file as the output (since `cat` will output the contents of the text file).
+
+```shell
+cat test.txt
+testing
+testing...
+testing.......
+testing..........
+it works.
+```
+
+If I configure my script correctly, this exact command and output should show up in the email in separate columns. First, I configure the `test.sh` script.
+
+```shell
+cmd="cat test.txt"
+cmd_output=$($cmd)
+
+email_subject="cron job - show file contents"
+email_to="test@email.com"
+email_from="alerts@uuard.com"
+
+# check if the cat command succeeded
+if [ $? -ne 0 ]; then
+    email_subject="error!"
+exit 1
+fi
+
+#create variable email_body
+read -r -d '' email_body << EOM
+<html> 
+  <head>
+  <style>
+    td, th {
+      font-family: helvetica;
+      color: #FBF7EF;
+      text-align:justify;
+      padding: 1em;
+      vertical-align:center;
+    }
+    table {
+      background: #2B303B;
+    }
+  </style>
+  </head>
+  <body>
+    <table>
+    <tr>
+      <th>command</th>
+      <td><pre>${cmd}</pre></th>
+    </tr>
+    <tr>
+      <th>output</th>
+      <td><pre>${cmd_output}</pre></td>
+    </table>
+  </body>
+</html>
+EOM
+
+echo -e "${email_body}" | mail --content-type=text/html -s "${email_subject}" -r "${email_from}" "${email_to}"
+
+```
+
+{{< image 
+    src="images/email-formatted.png" 
+    caption="Email Formatted" >}}
+
+
+## Improvements 
+### Templating
+It occurs to me that it will be tedious and costly to maintain these configs if I want to change things. I decided to lift out the HTML template into a separate file so that I need only edit a single file. Now I have a few files to manage, but fewer lines of duplication between all of the configurations. 
+
+#### Template Script
+
+```bash {filename="template-html-email.sh"}
+template=$(cat <<'EOF'
+<html lang="en">
+  <head>
+  <style>
+    td, th {
+      font-family: helvetica;
+      color: #FBF7EF;
+      text-align:justify;
+      padding: 1em;
+      vertical-align:center;
+    }
+    table {
+      background: #2B303B;
+    }
+  </style>
+  </head>
+  <body>
+    <table>
+    <tr>
+      <th>command</th>
+      <td><pre>${cmd}</pre></th>
+    </tr>
+    <tr>
+      <th>output</th>
+      <td><pre>${cmd_output}</pre></td>
+    </table>
+  </body>
+</html>
+EOF
+)
+```
+
+#### Send Error Email Script
+
+```bash {filename="send-error-email.sh"}
+#!/bin/bash
+source dry-run-config.sh
+
+cmd="$1"
+cmd_output="$2"
+export cmd
+export cmd_output
+
+email_body=$(echo "$template" | envsubst)
+
+#echo "Command: $cmd"
+#echo "Command Output: $cmd_output"
+#echo "Email Body: $email_body"
+
+printf "%s" "$email_body" | mail --content-type=text/html -s "${email_subject}" -r "${email_from}" "${email_to}"
+
+```
+#### Rclone Dry Run Config
+
+```bash {filename="dry-run-config.sh"}
+#!/bin/bash
+
+send_error_email_script="send-error-email.sh"
+template_html_email_script="template-html-email.sh"
+email_subject="cron alert"
+email_to="nicolaspatrickward@gmail.com"
+email_from="alert@uuard.com"
+
+source "$template_html_email_script"
+
+```
+
+#### Dry Run
+
+```bash
+#!/bin/bash
+
+# dry run config -- shared variables
+source dry-run-config.sh
+
+# dry-run command parameters
+src_dir="/source"
+dest_remote="dry-run" #this is a remote rclone dir
+dest_dir="/dest"
+
+# save both the command as executed, and the command output. Pass along to email script for formatting
+cmd="docker exec -t rclone rclone copy -v $src_dir $dest_remote:$dest_dir --dry-run"
+cmd_output=$($cmd)
+
+if [ $? -ne 0 ]; then
+     $send_error_email_script "$cmd" "$cmd_output"
+fi
+
+```
+
+Done.
diff --git a/container/site/content/posts/estes-park/estes-park-gallery.yaml b/container/site/content/posts/estes-park/estes-park-gallery.yaml
new file mode 100644
index 0000000..90a39f4
--- /dev/null
+++ b/container/site/content/posts/estes-park/estes-park-gallery.yaml
@@ -0,0 +1,46 @@
+images:
+  - src: "images/bird.JPG"
+    alt: "bird"
+    caption: "Bird"
+  - src: "images/bridge.JPEG"
+    alt: "bridge"
+    caption: "Bridge"
+  - src: "images/christmas-tree.JPEG"
+    alt: "christmas tree"
+    caption: "Christmas Tree"
+  - src: "images/copeland-falls.JPG"
+    alt: "copeland falls"
+    caption: "Copeland Falls"
+  - src: "images/frozen-lake.JPEG"
+    alt: "frozen lake"
+    caption: "Frozen Lake"
+  - src: "images/ground-squirrel.JPG"
+    alt: "ground squirrel"
+    caption: "Ground Squirrel"
+  - src: "images/hotel.JPEG"
+    alt: "hotel"
+    caption: "Hotel"
+  - src: "images/mountains.JPG"
+    alt: "mountains"
+    caption: "Mountains"
+  - src: "images/murphys-resort.JPG"
+    alt: "murphys resort"
+    caption: "Murphys Resort"
+  - src: "images/selfie-frozen-lake.jpg"
+    alt: "selfie frozen lake"
+    caption: "Selfie Frozen Lake"
+  - src: "images/the-stanley-hotel-front.JPEG"
+    alt: "the stanley hotel front"
+    caption: "The Stanley Hotel Front"
+  - src: "images/trail-selfie.JPEG"
+    alt: "trail selfie"
+    caption: "Trail Selfie"
+  - src: "images/trail-snowman.JPG"
+    alt: "trail snowman"
+    caption: "Trail Snowman"
+  - src: "images/trail.JPG"
+    alt: "trail"
+    caption: "Trail"
+  - src: "images/tree-squirrel.JPG"
+    alt: "tree squirrel"
+    caption: "Tree Squirrel"
\ No newline at end of file
diff --git a/container/site/content/posts/estes-park/index.md b/container/site/content/posts/estes-park/index.md
new file mode 100644
index 0000000..8eebfb7
--- /dev/null
+++ b/container/site/content/posts/estes-park/index.md
@@ -0,0 +1,22 @@
++++
+categories = ["travel"]
+date = 2023-01-02T12:00:00-06:00
+description = ""
+draft = false
+slug = "estes-park"
+title = "⛰️ Estes Park, CO"
+author = "nicholas"
++++
+
+## Estes Park
+
+{{< video
+  src="videos/estes-park.webm"
+  width="100%"
+  autoplay="true"
+  loop="true"
+>}}
+
+## Photo Gallery
+
+{{< gallerynew name="estes-park-gallery" >}}
\ No newline at end of file
diff --git a/container/site/content/posts/fooddata-central-ingest/index.md b/container/site/content/posts/fooddata-central-ingest/index.md
new file mode 100644
index 0000000..029596e
--- /dev/null
+++ b/container/site/content/posts/fooddata-central-ingest/index.md
@@ -0,0 +1,207 @@
++++
+categories = ["software"]
+tags = ["mssql","c#"]
+date = 2024-11-04T05:22:54Z
+description = ""
+draft = false
+slug = "fooddata-central-ingest"
+title = "📑 Extracting & Transforming USDA's FoodData Central Data"
+author = "nicholas"
++++
+
+USDA's *FoodData Central* is a comprehensive database of detailed information on food. Each food item has a detailed breakdown of nutrients, including macronutrients (like carbohydrates, fats, and proteins), micro-nutrients (vitamins and minerals), and other components (like water, caffeine, and alcohol). The site offers a download of the datasets in JSON format. I will write a script to transform the data to comport with the purposes of my recipe management system `Formulation`
+
+## Steps
+ * Create new C# .NET Core Console Application
+   * .NET Core 8
+ * Establish connection to the database
+   * I create a service connection, which is just a way to let Visual Studio automatically write the connection string to my database and store it in user secrets file.
+
+```c#
+using Microsoft.Data.SqlClient;
+using Microsoft.Extensions.Configuration;
+
+var config = new ConfigurationBuilder().AddUserSecrets().Build();
+var connectionString = config.GetConnectionString("FormulationDBSA");
+```   
+
+ * Model the data in the JSON file in C#
+   * I need to match Model property names with JSON property names
+
+```c#  
+public class FoundationFoodData
+{
+    [JsonPropertyName("FoundationFoods")]
+    public List FoundationFoods { get; set; }
+}
+
+public class FoodItem
+{
+    [JsonPropertyName("fdcId")]
+    public int FdcId { get; set; }
+
+    [JsonPropertyName("description")]
+    public string Description { get; set; }
+
+    [JsonPropertyName("foodNutrients")]
+    public List FoodNutrients { get; set; }
+}
+
+public class FoodNutrient
+{
+
+    [JsonPropertyName("nutrient")]
+    public Nutrient Nutrient { get; set; }
+
+    [JsonPropertyName("amount")]
+    public double Amount { get; set; }
+}
+
+public class Nutrient
+{
+    [JsonPropertyName("number")]
+    public string Number { get; set; }
+    [JsonPropertyName("unitName")]
+    public string UnitName { get; set; }
+}
+```
+   
+ * I am interested in only a few of the data model properties:
+   * `fdcid` - unique identifier, use this as primary key in the database
+   * `description` - essentially the name of the food item
+   * `foodNutrients` - array of nutrient objects
+ * I build the data model to only include those properties I am interested in:
+  
+```c#
+    public class Ingredient
+    {
+      public int Id { get; set; }
+      public string Name { get; set; }
+      public List Nutrients { get; set; }
+    }
+    public class IngredientNutrient
+    {
+      public string Name { get; set; }
+      public double Amount { get; set; }
+      public string Unit { get; set; }
+    }
+```
+
+#### Read the JSON file
+```c#
+var data = JsonSerializer.Deserialize(jsonData);
+```
+
+#### Create Dictionary for nutrient filtering and renaming
+```c#
+Dictionary NutrientFilter = new Dictionary
+        {
+            { "Sodium", 307 },
+            { "Sugar", 269 },
+            { "Water", 255 },
+            { "Fat", 204 },
+            { "Fiber", 291 },
+            { "Protein", 203 },
+            { "Carbohydrate", 205 },
+            { "Calories", 957 }
+        };
+``` 
+
+#### Transform the FoundationalFoods object
+```c#
+var ingredients = new List();
+foreach (var food in data.FoundationFoods)
+{
+    ingredients.Add(new Ingredient
+    {
+        Id = food.FdcId,
+        Name = food.Description,
+        Nutrients = food.FoodNutrients
+        .Where(nutrient => NutrientFilter.Any(n => n.Value.ToString() == nutrient.Nutrient.Number))
+        .Select(nutrient => new IngredientNutrient
+        {
+            Name = NutrientFilter.FirstOrDefault(filter => filter.Value.ToString() == nutrient.Nutrient.Number).Key,
+            Amount = nutrient.Amount,
+            Unit = nutrient.Nutrient.UnitName,
+        }).ToList()
+    });
+}
+```
+
+## Results
+I print formatted data to the console.
+
+ * Write the data to SQL Database
+   * The last step is to write the data to the database. This must wait until I sort out how to structure the database tables.
+   * For now, I add the fdc_id and water columns to my existing ingredient table, to see if this works.
+   * Once again, I use Add-Migration and Update-Database to automatically update my table schema.
+
+```c#
+    foreach (var food in data.FoundationFoods)
+{
+    ingredients.Add(new Ingredient
+    {
+        Id = Guid.NewGuid(),
+        FdcId = food.FdcId,
+        Name = food.Description,
+        Sodium = food.FoodNutrients.Where(fn => fn.Nutrient.Number == NutrientFilter["Sodium"].ToString()).Select(n => n.Amount).FirstOrDefault(),
+        Sugar = food.FoodNutrients.Where(fn => fn.Nutrient.Number == NutrientFilter["Sugar"].ToString()).Select(n => n.Amount).FirstOrDefault(),
+        Water = food.FoodNutrients.Where(fn => fn.Nutrient.Number == NutrientFilter["Water"].ToString()).Select(n => n.Amount).FirstOrDefault(),
+        Fat = food.FoodNutrients.Where(fn => fn.Nutrient.Number == NutrientFilter["Fat"].ToString()).Select(n => n.Amount).FirstOrDefault(),
+        Fiber = food.FoodNutrients.Where(fn => fn.Nutrient.Number == NutrientFilter["Fiber"].ToString()).Select(n => n.Amount).FirstOrDefault(),
+        Protein = food.FoodNutrients.Where(fn => fn.Nutrient.Number == NutrientFilter["Protein"].ToString()).Select(n => n.Amount).FirstOrDefault(),
+        Carbohydrate = food.FoodNutrients.Where(fn => fn.Nutrient.Number == NutrientFilter["Carbohydrate"].ToString()).Select(n => n.Amount).FirstOrDefault(),
+        Kilocalorie = food.FoodNutrients.Where(fn => fn.Nutrient.Number == NutrientFilter["Calories"].ToString()).Select(n => n.Amount).FirstOrDefault(),
+        IsFormulation = false
+    });
+}
+
+DataTable ingredientData = new DataTable();
+
+ingredientData.Columns.Add(new DataColumn("id", typeof(Guid)));
+ingredientData.Columns.Add(new DataColumn("name", typeof(string)));
+ingredientData.Columns.Add(new DataColumn("is_formulation", typeof(bool)));
+ingredientData.Columns.Add(new DataColumn("kilocalorie", typeof(double)));
+ingredientData.Columns.Add(new DataColumn("protein", typeof(double)));
+ingredientData.Columns.Add(new DataColumn("fat", typeof(double)));
+ingredientData.Columns.Add(new DataColumn("carbohydrate", typeof(double)));
+ingredientData.Columns.Add(new DataColumn("fiber", typeof(double)));
+ingredientData.Columns.Add(new DataColumn("sugar", typeof(double)));
+ingredientData.Columns.Add(new DataColumn("sodium", typeof(double)));
+ingredientData.Columns.Add(new DataColumn("fdc_id", typeof(int)));
+ingredientData.Columns.Add(new DataColumn("water", typeof(double)));
+
+foreach (var ingredient in ingredients)
+{
+    ingredientData.Rows.Add(
+        ingredient.Id,
+        ingredient.Name,
+        ingredient.IsFormulation,
+        ingredient.Kilocalorie,
+        ingredient.Protein,
+        ingredient.Fat,
+        ingredient.Carbohydrate,
+        ingredient.Fiber,
+        ingredient.Sugar,
+        ingredient.Sodium,
+        ingredient.FdcId.HasValue ? ingredient.FdcId.Value : DBNull.Value,
+        ingredient.Water
+    );
+}
+
+using (var connection = new SqlConnection(connectionString))
+{
+    await connection.OpenAsync();
+    using (SqlBulkCopy bulkCopy = new SqlBulkCopy(connection))
+    {
+        bulkCopy.DestinationTableName = "ingredient";
+        await bulkCopy.WriteToServerAsync(ingredientData);
+    }
+}
+```
+
+{{< image 
+    src="images/json_db_ingest.exe.png" 
+    caption="Ingest Console App" >}}
+
+Done.
\ No newline at end of file
diff --git a/container/site/content/posts/formulation-web-app-I/index.md b/container/site/content/posts/formulation-web-app-I/index.md
new file mode 100644
index 0000000..e4ac130
--- /dev/null
+++ b/container/site/content/posts/formulation-web-app-I/index.md
@@ -0,0 +1,96 @@
++++
+categories = ["software"]
+tags = ["C#","MSSQL","blazor"]
+date = 2024-11-02T18:24:31Z
+description = ""
+draft = false
+slug = "formulation-web-app-I"
+title = "🔒 Adding User Account support to Web App"
+author = "nicholas"
++++
+
+All of the changes I make to the `formulation` repository are tracked in [my private git SCM, Gitea](https://git.uuard.com/nicholas/formulation). This log will mostly only ever reference those changes so that I do not repeat the code here, in keeping with the principle of **DRY**.
+
+## Discussion
+I built a simple app to manage my recipes. As of writing this post, the app only has minimal functionality, but it does everything I wanted it to do when I started the project. Before I decide to add additional features, I reason it will be good to add user account support first, mostly because this feature will touch almost every aspect of the project. Every additional feature will be constrained by the user account feature – pages will need authentication, and running certain operations will need proper authorization, database changes, etc. It is best to get this out of the way first.
+
+
+## First Steps - ASP.NET Core Identity
+First I look for precedent in implementing user accounts into a Blazor Webassembly app. Happily I have found Microsoft's very own example here: https://github.com/dotnet/blazor-samples/tree/main/8.0/BlazorWebAssemblyStandaloneWithIdentity
+
+This example uses `ASP.NET Core Identity`, an API that supports UI login functionality and manages users, passwords, profile data, roles, claims, tokens, email confirmation, and more. This system of authentication and authorization will slot into my own project with a few minimally tedious changes, which I do not outline here. Alternatively, I could use an external credential system like `OIDC` to allow users to authenticate using external credentials from Microsoft, Google, etc. I decided not to go this route because it is generally more complicated to implement, and I have no real need.
+
+## The state of things
+After some time I arrive at working implementation of Identity:
+ * An unauthenticated, non-authorized user visits the `home` page. This page is configured to only show content when the user has proper authorization.
+  {{< image
+    src="images/notauthorized.png"
+    caption="Not Authorized" >}}
+
+ * User visits the `/register` page to create an account. The supplied credentials are stored in the database.
+{{< image
+    src="images/register.png"
+    caption="Register Page" >}}
+{{< image
+    src="images/register_success.png"
+    caption="Registration Successful" >}}
+
+ * User visits the `/login` page and enters previously created credentials to be matched against those stored in the database.
+{{< image
+    src="images/login.png"
+    caption="Login" >}}
+{{< image
+    src="images/login-success.png"
+    caption="Login Success" >}}
+
+ * User logs in successfully and is able to visit `/home` page and see the protected content.
+
+{{< image
+    src="images/authorized.png"
+    caption="Authorized User" >}}
+  
+For now, that is all I need. I now have a functional and secure implementation of a user membership system that I can build around.
+
+
+## Entity Framework Code-First Approach 
+The next step is to streamline the development process for the database. For this I will use the "code-first" approach to Entity Framework. This allows me to define my database schema in C# code instead of designing the database first. This is especially useful when the ultimate requirements of the database are not well understood, which is common during the early, rapidly iterative development process.
+
+This approach frees me to focus on mostly just the code and leaves the tedious task of continuously dropping and modifying databases – rewriting the entire SQL query that generates the database, to the computer using EF Core Package Manager Console Tools. This is a command-line tool that is already built in to Visual Studio.
+
+Here is the basic process:
+
+ * I decide I do not like something about a table in my database. Maybe the name violates my naming convention. I simply change the name in the code.
+ * In the Package Manager Console in Visual Studio I create a migration named SatisfyNamingConvention. The tool will automatically generate a pathway to changing the database to match my EF Models.
+
+`Add-Migration SatisfyNamingConvention`
+
+ * In the Package Manager Console, I can apply the proposed database changes.
+
+`Update-Database SatisfyNamingConvention`
+
+By default, `Microsoft.AspNetCore.Identity` maps its built-in `IdentityUser` to a database table `ASPNetUser`. All of the other built-in models that attend the Identity membership system have this same ASPNet prefix. I do not like the name and I prefer to use snake_case in my databases. I use the process I described above to change the default names of the tables and columns to snake case.
+
+##  Single user → multi-user regime
+The app was built with a single user in mind. Now I will begin to transition the app to support user-specific data. As mentioned above, this will change the way the data is structured.
+
+First, I will want to define the new structure of the data. Under the single-user regime, the data was structured very simply. There were only two tables: `ingredient` and `ingredient_relationship`. The ingredient could either be a *formulation* with a parent relationship with many child ingredients, or the ingredient could be a base ingredient, with only parent relationships. Now, each `ingredient_relationship` will share a foreign key with a `user`.
+
+## User Table
+Table schema will be defined mostly by Microsoft Identity API.
+
+
+{{< image
+    src="images/formulation_database_diagram_Microsoft.Identity_transparent_bg.png"
+    caption="User Table" >}}
+
+## Further Plans
+ * Instead of relying entirely on manually entered nutritional data, I will replicate the foods datasets from Food Data Central in my own database as a built-in source for base ingredients. I will call these template ingredients.
+ * Users may use these ingredients to create user ingredients. These custom ingredients are not added to global catalog of template ingredients. I will need to decide whether to create a new table or add a flag or discriminator column for these custom ingredients.
+
+
+{{< image
+    src="images/formulation_database_diagram_all.png"
+    caption="The Whole Thang" >}}
+
+Done.
+
diff --git a/container/site/content/posts/formulation-web-app-II/index.md b/container/site/content/posts/formulation-web-app-II/index.md
new file mode 100644
index 0000000..70c7c99
--- /dev/null
+++ b/container/site/content/posts/formulation-web-app-II/index.md
@@ -0,0 +1,110 @@
++++
+categories = ["software"]
+tags = ["C#","MSSQL","blazor"]
+date = 2025-04-15T12:45:00-05:00
+description = ""
+draft = false
+slug = "formulation-web-app-II"
+title = "🥣 Formulation - Nutrition Calculator"
+author = "nicholas"
++++
+
+**View the git repository [here](https://git.uuard.com/nicholas/formulation)**
+
+In a [previous post]({{< relref "posts/formulation-web-app-I">}}) I added multi-user support to a web app I built with Microsoft's Blazor framework in C#, which I named **Formulation**. In this post I review a fully-working version of the project.
+
+{{< video
+  src="videos/formulation-demo-3x.mp4"
+  width="100%"
+  autoplay=true
+  loop=true
+>}}
+
+### Problem
+The problem is in my previous approach to estimating nutrition, which was to prepare many units of a single type of food item with known nutrition, e.g. frozen burritos. I knew that if I ate one whole `<food>` I would have consumed `<nutrition>`. This works, but it is not flexible: I must eat the whole `<food>` item, and only eat `<food>` items, or else be pained to calculate things manually.
+
+### Solution - Weight-based recipes
+The main idea of the app is to allow me to quickly **calculate** nutrition data. It is not enough that I should **estimate** using sloppy heuristics, or even calculate using mess-making **volumetric** measurements. I cannot do it anymore! I will not fill measuring spoons and cups, scoop out the contents, rinse, scoop again, always scooping, always leveling and scooping and scooping and converting. Accuracy relies on consistent scooping technique and density, both can be highly variable. Flour, for example, can vary from scoop to scoop by around **30%**! This is an enormous margin and pure madness in a world where highly sensitive and accurate scales exist. I do not have to live like this anymore, and it has been a long time since I have. I will never go back. All I need is a scale, *and to patiently convert volume-based recipes into weight-based recipes.*
+
+#### Example
+Suppose I ate something like this:
+- 3/5ths of a banana
+- leftover taco meat
+- some refried beans
+- flour tortilla
+- a dollop of sour cream
+
+To understand what exactly I am about to eat, I simply:
+- place item on the scale
+- enter the weight
+- tare, and 
+- repeat for each ingredient.
+  
+Done. The only real work is in the data entry, but over time I will have built out a personal database of custom food items and their nutrition and there will be little work left to do. No scooping, no converting!
+
+---
+
+### Demo
+I show and describe the app here.
+
+##### Sign in / Sign up
+This is where a user can enter the app. If there is an issue with the sign in or registration process, they will be shown in a little warning box.
+
+{{< image
+  src="images/sign-up-error.jpg"
+  caption="Sign Up Validation Failed" >}}
+
+---
+
+##### Toast
+This demonstrates a dismissible toast notification service that shows certain messages from the server.
+
+
+{{< image
+  src="images/toast.webp"
+  caption="Toast Notification" >}}
+
+---
+
+##### Editor Area
+This section lists all of the user's ingredients and formulations. Contains a search and filter. Any ingredient can be edited or removed here, and new ingredients can be added to formulations.
+
+
+{{< image
+  src="images/editor.jpg"
+  caption="Editor Area" >}}
+
+---
+
+##### Ingredients and Formulations
+Ingredients are the most basic unit of a formulation. An **ingredient** has nutrition information that is entered by the user, not calculated. A **formulation** is just a collection of ingredients and other formulations, each of which constitute a proportion of the formulation.
+
+##### Ingredients
+I can create a new ingredient and fill in the nutrition data.
+
+
+{{< image
+  src="images/edit-ingredient.jpg"
+  caption="Edit Ingredient" >}}
+
+---
+
+##### Formulations
+The nutrition is calculated based on the nutrition present in the sub-ingredients, and according to the sub-ingredient proportion. In this example, I have created a formulation for *chocolate chip cookie dough*
+
+{{< image
+  src="images/edit-formulation.jpg"
+  caption="Edit Formulation" >}}
+
+---
+
+##### Kitchen Area
+The kitchen area is where one can, for example, find out how much protein is in a preparation of food. For example, earlier I created a *chocolate chip cookie dough* formulation. Now I want to bake a cookie with 20 g of dough. I add the ingredient to the *quantity adjustment* area, and enter the amount `20`. The *results* area will display the nutrition for whatever ingredients appear in the *quantity adjustment* area, according to the amount entered. 
+
+{{< image
+  src="images/kitchen.jpg"
+  caption="Kitchen area" >}}
+
+---
+
+That is pretty much all. As with any software project, there are endless things still to be improved, corrected, or added, but I accomplished what I wanted with this project so I am allowing myself to call it "finished".
\ No newline at end of file
diff --git a/container/site/content/posts/gitea-actions/index.md b/container/site/content/posts/gitea-actions/index.md
new file mode 100644
index 0000000..bdbc859
--- /dev/null
+++ b/container/site/content/posts/gitea-actions/index.md
@@ -0,0 +1,558 @@
++++
+categories = ["software"]
+tags = ["automation","docker","git","devops","kubernetes"]
+date = 2025-05-08T12:50:00-05:00
+description = ""
+draft = false
+slug = "gitea-actions-kubernetes"
+title = "▶️ Gitea Actions & Kubernetes"
+author = "nicholas"
++++
+
+I currently use **Jenkins** to automate the build and deployment of my [personal website](https://nicholas.uuard.com) and my [blog site](https://log.nicholas.uuard.com). I will experiment with a **Gitea Actions** workflow to see if I can accomplish the same thing in Gitea.
+
+This process should be familiar to me since the workflow I configure in this post will more or less mirror the behavior of my Jenkins setup: an independent service (e.g., Jenkins agent, Gitea runner) executes steps defined in a repo configuration file (e.g., `Jenkinsfile`, `demo.yml`). 
+
+> I wrote a post for each of my other Jenkins pipelines.
+> - [🚀 Hugo Site Deployment]({{< relref "posts/jenkins-deploy-web-log">}})
+> - [🤵🏻 Personal Website Deployment]({{< relref "posts/jenkins-deploy-website">}})
+
+## Generate Registration token for runner
+I will first need to generate a **authentication / identification** token to register with the Gitea server. This is very simple using the web app GUI. I click the button **Create new Runner** and it generates the registration token for me. I will use this token later.
+
+{{< image 
+    src="images/runnner-registration-token.png" 
+    caption="Generate registration token for gitea runner" >}}
+
+ I *could* have generated this using `gitea actions generate-runner-token` command inside the container, which would give me more control over the scope of the runner (e.g. global, org, repo scope) but I do not care such minutiae right now.
+
+
+## Create Gitea runner container
+Next I need to configure and run the **runner container**. To do this I will:
+- modify `docker-compose.yml` to include `gitea/act_runner`
+- add environment variables for `REGISTRATION_TOKEN`, etc.
+- restart the services.
+
+#### act_runner
+Gitea provides an official image `gitea/act_runner`. For testing purposes, I will not need anything more than this and the basic ubuntu-based image `ubuntu-latest`.
+
+This runner will be capable of running GitHub Actions-like workflows in Gitea -- it even uses the same [syntax](https://docs.github.com/en/actions/writing-workflows/workflow-syntax-for-github-actions) as GitHub Actions. Later, I will configure a workflow using this syntax that defines the "actions" the runner will perform on my repository.
+
+Next I add a `runner` service to my `docker-compose.yml` file. Before, there were only 2 containers in the application services: `db` and `gitea`. I have added a third: `gitea_runner`:
+
+```yaml
+networks:
+  gitea:
+    external: false
+
+services:
+  gitea:
+    image: gitea/gitea:latest
+    container_name: gitea
+    environment:
+      - USER_UID=1000
+      - USER_GID=1000
+      - GITEA__database__DB_TYPE=mysql
+      - GITEA__database__HOST=db:3306
+      - GITEA__database__NAME=gitea
+      - GITEA__database__USER=gitea
+      - GITEA__database__PASSWD=${MYSQL_PASSWORD}
+    restart: always
+    networks:
+      - gitea
+    volumes:
+      - ./data:/data
+      #- ./logs:/var/lib/gitea/log
+      - /etc/timezone:/etc/timezone:ro
+      - /etc/localtime:/etc/localtime:ro
+    ports:
+      - "${GITEA_PORT}:3000"
+    depends_on:
+      - db
+    healthcheck:
+      test: [ "CMD", "curl", "-f", "http://localhost:3000/api/healthz" ]
+      interval: 10s
+      timeout: 5s
+      retries: 5
+
+  db:
+    image: mysql:8
+    container_name: gitea_db
+    restart: always
+    environment:
+      - MYSQL_ROOT_PASSWORD=${MYSQL_ROOT_PASSWORD}
+      - MYSQL_USER=gitea
+      - MYSQL_PASSWORD=${MYSQL_PASSWORD}
+      - MYSQL_DATABASE=gitea
+    networks:
+      - gitea
+    volumes:
+      - ./mysql:/var/lib/mysql
+
+  runner:
+    image: gitea/act_runner
+    container_name: gitea_runner
+    restart: always
+    depends_on:
+      gitea:
+        condition: service_healthy
+        restart: true
+    volumes:
+      - ./data/act_runner:/data
+      - /var/run/docker.sock:/var/run/docker.sock
+    environment:
+      - GITEA_INSTANCE_URL=${GITEA_INSTANCE_URL}
+      - GITEA_RUNNER_REGISTRATION_TOKEN=${GITEA_RUNNER_REGISTRATION_TOKEN}
+      - GITEA_RUNNER_NAME=${GITEA_RUNNER_NAME}
+
+```
+
+## Configure a demo workflow
+Now I need to configure a test workflow using the GitHub Actions syntax I mention above. Gitea provides a demo workflow that I will use to verify that I can successfully run a workflow in a runner container:
+
+```yaml
+name: Gitea Actions Demo
+run-name: ${{ gitea.actor }} is testing out Gitea Actions 🚀
+on: [push]
+
+jobs:
+  Explore-Gitea-Actions:
+    runs-on: ubuntu-latest
+    steps:
+      - run: echo "🎉 The job was automatically triggered by a ${{ gitea.event_name }} event."
+      - run: echo "🐧 This job is now running on a ${{ runner.os }} server hosted by Gitea!"
+      - run: echo "🔎 The name of your branch is ${{ gitea.ref }} and your repository is ${{ gitea.repository }}."
+      - name: Check out repository code
+        uses: actions/checkout@v4
+      - run: echo "💡 The ${{ gitea.repository }} repository has been cloned to the runner."
+      - run: echo "🖥️ The workflow is now ready to test your code on the runner."
+      - name: List files in the repository
+        run: |
+          ls ${{ gitea.workspace }}
+      - run: echo "🍏 This job's status is ${{ job.status }}."
+```
+
+I place this `demo.yml` file in my `proving-ground` repository:
+```plaintext
+proving-ground/
+├── 📂.gitea/
+│   └── 📂workflows/
+│       └── demo.yml
+```
+
+Before I push this workflow to the repository, I need to finish setting up the runner. Then, once I push the new code, Gitea Actions should trigger the workflow, according to the line `on: [push]`
+
+
+## Runner test
+I bring down the current Gitea application by running `docker compose down` and start it up again (this time including the new runner) with `docker compose up -d`. I navigate to the **Gitea Runners** in the web interface to verify that the runner is registered and running correctly:
+
+{{< image 
+    src="images/gitea-runner.jpg" 
+    caption="Create runner" >}}
+
+**✅It works**.
+
+---
+
+ Now I can commit and push my new workflow `test.yml` and verify that the runner can perform Gitea Actions. After I push, I navigate to: **nicholas/proving-ground** → **Actions** to view the latest run:
+
+{{< image 
+    src="images/test-workflow-running.jpg" 
+    caption="Test workflow - running" >}}
+
+{{< image 
+    src="images/test-workflow-success.jpg" 
+    caption="Test workflow - success" >}}
+
+**✅ It works** 
+
+---
+
+The runner executed each step defined in the workflow configuration file. 
+
+Next I will configure a new workflow to perform a more useful automation.
+
+## Build, Deploy
+The next step is to **build** and **deploy** to a web server. There are many ways to accomplish this depending on how I choose to architect my infrastructure. Since I am only deploying a static website and all work is being performed on the same machine, it would be simple to transfer the site files locally between host and containers. However, I will make things more interesting by artificially introducing *arguably* unnecessary complexity to the solution. This will move me closer to DevOps pipeline that would be seen in production.
+
+
+### Outline
+The pipeline will look something like this:
+
+- Push changes to site repo, `master` branch
+- Trigger Action 
+  - Pull `master` branch
+-  **build** a Docker image with new content
+  - **push** Docker image to container registry
+- `k3s` deploys containerized web site
+
+---
+
+###### k3s / Kubernetes container
+When my action runner connects to the Kubernetes API at `https://server:6443` (as per `kubeconfig.yml`), it verifies the server's TLS certificate. If the hostname in the `kubeconfig.yml` ("server") does not match any SAN in the cert, the connection will fail with a TLS verification error. I can explicitly add "server" as a valid domain in the TLS cert to prevent this error.
+
+`command: server --tls-san "server"`
+
+```yaml
+k3s_server:
+    image: "rancher/k3s:${K3S_VERSION:-latest}"
+    container_name: k3s_server
+    command: server --tls-san "server"
+    tmpfs:
+      - /run
+      - /var/run
+    ulimits:
+      nproc: 65535
+      nofile:
+        soft: 65535
+        hard: 65535
+    privileged: true
+    restart: always
+    environment:
+      - K3S_TOKEN=${K3S_TOKEN:?err}
+      #- K3S_KUBECONFIG_OUTPUT=/output/kubeconfig.yaml
+      - K3S_KUBECONFIG_MODE=666
+    networks:
+      - cicd
+    volumes:
+      - k3s-server:/var/lib/rancher/k3s
+      - ./k3s:/output
+    ports:
+      - 6443:6443 # Kubernetes API Server
+      - ${INGRESS_CONTROLLER_PORT_HTTP}:80 # Ingress controller port 80
+      - ${INGRESS_CONTROLLER_PORT_HTTPS}:443 # Ingress controller port 443
+```
+
+---
+
+###### Create static web page
+I create a sample static web page `index.html` that I will serve in my nginx container. 
+
+```plaintext
+📂site/
+├── index.html
+```
+```html
+<!DOCTYPE html>
+<html lang="en">
+<head>
+  <meta charset="UTF-8" />
+  <meta name="viewport" content="width=device-width, initial-scale=1" />
+  <title>Hello, World!</title>
+  <style>
+    /*...*/
+  </style>
+</head>
+<body>
+  <h1>Behold</h1>
+  <p>The Cosmos is all that is or was or ever will be. Our feeblest contemplations of the Cosmos stir us — there is a tingling in the spine, a catch in the voice, a faint sensation, as if a distant memory, of falling from a height. We know we are approaching the greatest of mysteries. </p>
+</body>
+</html>
+
+---
+
+```
+###### Create Dockerfile
+Next I will create the Dockerfile. This file will define a container that will serve the static web page `index.html` using nginx. The Dockerfile will remove all of the default files that ship with `nginx:alpine` and replace them with the contents of my `site` directory, which contains only `index.html`.
+
+**`Dockerfile`**
+```Dockerfile
+FROM nginx:alpine
+RUN rm -rf /usr/share/nginx/html/*
+COPY ./site/ /usr/share/nginx/html/
+EXPOSE 80
+```
+
+---
+
+###### Set up credentials for image registry (gitea)
+One step in the workflow involves pushing the newly-built application Docker image to my registry. To push, I will need to authenticate with the Gitea server. To do this, I will use a GitHub action called `login-action@v3` found in the [GitHub Actions marketplace](https://github.com/marketplace?type=actions). This action requires a few inputs to work:
+- Registry URL
+- Username
+- Password (access token)
+
+The registry URL and username inputs are straightforward and I can pass these variables along as strings. The access token will need to be passed as a secret. First I generate an access token in Gitea. I will name this `gitea-package-registry` and give it only the package write permission.
+
+{{< image 
+    src="images/gitea-access-token-generate.png" 
+    caption="Generate registry token" >}}
+
+ Next I will store this as a secret so that I can securely pass it to the runner. I name the secret `REGISTRY_TOKEN`
+
+{{< image 
+    src="images/gitea-access-token-secret.png" 
+    caption="Store registry token secret" >}}
+
+{{< image 
+    src="images/registry-token-created.png" 
+    caption="Gitea registry token" >}}
+
+I can reference this secret in my workflow file `${{ secrets.REGISTRY_TOKEN }}`.
+
+---
+
+###### Store kubeconfig as Gitea secret
+My workflow file needs access to one more secret: my `kubeconfig.yml`. Storing this as a secret is not as straightforward as the registry access token, since I cannot store a file directly as a secret. I will need encode the file as a base64 string, store *that* string as a secret named `KUBECONFIG_DATA`, and decode the string back into the `kubeconfig.yml` file.
+
+First, my k3s container is configured to automatically produce a `kubeconfig.yml` and output it to the specified directory. I have included the relevant configuration from my `docker-compose.yml` file as context.
+
+**`docker-compose.yml` snippet**
+```yaml
+    environment:
+      - K3S_KUBECONFIG_OUTPUT=/output/kubeconfig.yml
+    volumes:
+      - ./k3s:/output
+```
+
+On my host machine, I can locate the generated `kubeconfig.yml` file at `./k3s/kubeconfig.yaml`. Next, I run the following command to base64-encode it and write the result to `kubeconfig.b64`.
+
+```shell
+base64 -w 0 kubeconfig.yaml > kubeconfig.b64
+```
+
+The contents of `kubeconfig.b64` is a string that will be stored as a secret in Gitea:
+
+{{< image 
+    src="images/kubeconfig-data.png" 
+    caption="Base64 encoded secret" >}}
+
+I will reference this secret in my **Gitea Action workflow**, which is defined in yet another yaml file-- this one stored in the same `workflows` directory as the `demo.yml` created in earlier step, during initial stages of setting up the pipeline.
+
+```plaintext
+📂proving-ground/
+ └─📂.gitea/
+    └─📂workflows/
+       ├─demo.yml
+       └─deploy.yml
+```
+
+---
+
+###### Action Workflow file - deploy static web page
+The workflow file defines several steps that will compose the deployment process:
+- **⬇️Checkout** app repository (`proving-ground`)
+- **🔐Login** to Gitea package registry
+- **🐋Build** Docker image from Dockerfile
+- **🚀Push** new image to package registry
+- **🛠️Install** `kubectl`
+- **🔑Decode** `KUBECONFIG_DATA` secret and write local **`kubeconfig.yml`** file; Use this file as `KUBECONFIG` env.
+- **🚀Test / Deploy** to Kubernetes cluster via API
+- **🧹Prune** images
+
+The `kubectl` CLI utility uses my `kubeconfig.yml` file to authenticate and connect to the Kubernetes cluster in the k3 container. It communicates with the Kubernetes API over HTTP/HTTPS (`https://server:6443`).
+
+**deploy.yml**
+
+```yaml
+name: Deployment
+
+on:
+  push:
+    branches:
+      - master
+  workflow_dispatch:
+
+jobs:
+  deploy-site:
+    name: 'deploy'
+    env:
+      REGISTRY_USERNAME: nicholas
+      IMAGE_REGISTRY: git.uuard.com
+      IMAGE_NAME: nicholas/proving-ground
+      IMAGE_TAG: latest
+    runs-on: ubuntu-latest
+    steps:
+      - name: ⬇️ Checkout repo
+        uses: actions/checkout@v4
+
+      - name: 🔐 Gitea Registry Login
+        uses: docker/login-action@v3
+        with:
+          registry: ${{ env.IMAGE_REGISTRY }}
+          username: ${{ env.REGISTRY_USERNAME }}
+          password: ${{ secrets.REGISTRY_TOKEN }}
+
+      - name: 🐋 Build Docker image
+        run: docker build -t $IMAGE_REGISTRY/$IMAGE_NAME:$IMAGE_TAG ./container
+
+      - name: 🚀 Push Docker image
+        run: docker push $IMAGE_REGISTRY/$IMAGE_NAME:$IMAGE_TAG
+
+      - name: 🛠️ Setup kubectl
+        uses: azure/setup-kubectl@v4
+        with:
+          version: 'latest'
+
+      - name: 🔑 Configure Kubeconfig
+        run: |
+          echo "${{ secrets.KUBECONFIG_DATA }}" | base64 -d > kubeconfig.yml
+
+      - name: 🧪 Test access
+        env:
+          KUBECONFIG: kubeconfig.yml
+        run: kubectl get nodes
+
+      - name: 🚀 Deploy to k3s
+        env:
+          KUBECONFIG: kubeconfig.yml
+        run: |
+          kubectl apply -f k8s/deployment.yml
+          kubectl apply -f k8s/service.yml
+          kubectl apply -f k8s/ingress.yml
+          kubectl rollout restart deployment proving-ground
+          kubectl rollout status deployment/proving-ground
+
+      - name: 🧹 Cleanup images
+        if: always()
+        run: docker image prune -f
+```
+
+---
+
+###### Diagram
+This diagram shows the relationship between the various containers.
+```mermaid
+graph TD
+  subgraph host[Host]
+    subgraph docker[Docker]
+      subgraph kubernetes[Kubernetes / k3s]
+        subgraph pod[Pod]
+          container["NGINX"]
+        end
+      end
+      gitea-server[Gitea Server]
+      gitea-runner[Gitea Action Runner]
+      
+      gitea-server <--> gitea-runner
+      gitea-runner --Kubernetes API--> kubernetes
+    end
+  end
+```
+
+
+---
+
+###### Kubernetes deployment manifest
+My Kubernetes manifest defines a basic static website deployment using the NGINX container image `proving-ground:latest`. The manifest configuration includes three resource types: 
+- **Deployment** (`deployment.yml`)
+  - `kubectl apply -f k8s/deployment.yml`
+  - Runs the NGINX container inside a pod
+- **Service** (`service.yml`)
+  - `kubectl apply -f k8s/service.yml`
+  - Exposes the pod containing the NGINX app, makes it accessible inside the cluster
+- **Ingress** (`ingress.yml`)
+  - `kubectl apply -f k8s/ingress.yml`
+  - Configures routing rules to expose NGINX app externally
+
+
+**deployment.yaml**
+
+```yaml
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: proving-ground
+  labels:
+    app: proving-ground-static-site
+spec:
+  replicas: 1
+  selector:
+    matchLabels:
+      app: proving-ground-static-site
+  template:
+    metadata:
+      labels:
+        app: proving-ground-static-site
+    spec:
+      containers:
+        - name: nginx
+          image: git.uuard.com/nicholas/proving-ground:latest
+          ports:
+            - containerPort: 80
+```
+
+**ingress.yml**
+
+```yaml
+apiVersion: networking.k8s.io/v1
+kind: Ingress
+metadata:
+  name: proving-ground-static-site-ingress
+spec:
+  rules:
+    - host: server
+      http:
+        paths:
+          - path: /
+            pathType: Prefix
+            backend:
+              service:
+                name: proving-ground-static-site-service
+                port:
+                  number: 80
+```
+
+**service.yml**
+
+```yaml
+apiVersion: v1
+kind: Service
+metadata:
+  name: proving-ground-static-site-service
+spec:
+  selector:
+    app: proving-ground-static-site
+  ports:
+    - protocol: TCP
+      port: 80
+      targetPort: 80
+  type: LoadBalancer
+```
+
+---
+
+###### Site repo directory structure
+This is the complete repository directory structure.
+```
+📁proving-ground
+ ├─📁.gitea
+ │  └─📁workflows
+ │     ├─demo.yml
+ │     └─deploy.yml
+ ├─📁container
+ │  ├─Dockerfile
+ │  └─📁site
+ │     └─index.html
+ └─📁k8s
+    ├─deployment.yml
+    ├─ingress.yml
+    └─service.yml
+```
+
+---
+
+###### Test Kubernetes API / kubectl
+Now I can test the Kubernetes connection by running `kubectl get nodes`. If this step succeeds, I have verified the connection between the runner container and Kubernetes. I can trigger this build by either pushing to `master` or manually triggering the build via Gitea UI.
+
+{{< image 
+    src="images/k3s-test-success.png" 
+    caption="Deployment test success" >}}
+
+**✅ It works**
+
+---
+
+###### Deploy
+Now I deploy the app. I simply push changes to the repository, and voilà, my app is live.
+
+{{< image 
+    src="images/k3s-deploy-success.png" 
+    caption="Deployment success" >}}
+
+{{< image 
+    src="images/view-site-deployment.png" 
+    caption="View deployment in browser" >}}
+
+
+**🎉 It works!**
+Done.
diff --git a/container/site/content/posts/grow-lights/index.md b/container/site/content/posts/grow-lights/index.md
new file mode 100644
index 0000000..e6ed938
--- /dev/null
+++ b/container/site/content/posts/grow-lights/index.md
@@ -0,0 +1,58 @@
++++
+categories = ["build","plants"]
+date = 2025-01-01T16:30:00Z
+description = ""
+draft = false
+slug = "grow-lights"
+title = "💡 Houseplant Grow Lights"
+author = "nicholas"
++++
+
+It is winter and the days are short and dark. House plants grow better with more light. I will build two grow lights using off the shelf electric supplies.
+
+{{< video autoplay=true loop=true
+  src="videos/timelapse-plant-full.webm"
+  width="100%"
+>}}
+
+## Summary
+The plants sit on a wire shelf cart. Some are not looking so good. The 4 notched posts that support the shelves are hollow inside, with an inner diameter that is a bit more than the outer diameter of 1/2" EMT conduit. This is lucky, as it allows me to slot in a length of EMT conduit upon which I build the rest of the lamp. I am able to rotate the conduit inside the posts to change the direction of light, and the lamp holder adds an additional degree of freedom by allowing me to change the vertical tilt of the lamp. There is enough slop / allowance between the cart posts and the conduit that rotate easily, but not so much that the lamp is unstable. Thanks to electrical standards, all of the components I build off of the EMT conduit can be made compatible with each other. I plug an outlet strip into a remote switch my parents gave me for my birthday. The plants now reach directly upward instead of angling toward whichever direction the window happens to be that day (the cart moves a lot). The cart can still move around even tethered to a wall outlet. Mounting the lamps to the cart means no floor clutter to bump into. I am pleased with how the build process went, and the result.
+
+{{< image 
+    src="images/plant-cart-lights-on.JPG" 
+    caption="Plant cart with lights ON" >}}
+
+{{< image 
+    src="images/grow-light-close.JPG" 
+    caption="Light close up" >}}
+
+## Parts List
+{{< image 
+    src="images/components.jpg" 
+    caption="Parts" >}}
+
+### LED Bulb
+I chose a 5000K 25 W PAR38 bulb with 40 degree light cone.This gives great coverage and minimal wasted light. A second bulb was purchased on clearance at *Menards* for less than $5.00, a price which matches its performance. It gets terribly, hot, does not produce nearly as much light as the other at roughly the same power, and has a very wide angle light cone. I do not mind any of this for such a price, though. This is not a serious growing operation and frankly the plants get enough light to do just fine through the winter anyway. The color temperatures of the bulbs are matched to daylight \ full spectrum light. Nearly all of the houseplants that sit atop the cart benefit from bright indirect daylight, which is something like 10,000-20,000 lux. I use an app on my phone to measure the illuminance (lux), which I understand is not as precise as a proper light meter. Once again, this is good enough. Several apps converge on around the same "measurements" of illuminance, and many have confirmed that the apps get close to the values measured on light meters. Placed just at the tops of the plants, my phone produces a reading of ~15,000 lux. Great.
+
+### EMT Conduit
+I bought two (2) 5' lengths of 1/2" EMT Conduit because 10' would not fit inside a small car. I wanted a little bit of extra height to take full advantage of the beam angle of the floodlight, but it turns out that the few inches of additional height would not nearly have been worth the trouble of hack sawing my way through the metal tubes.
+
+### Wiring
+I had a couple of extension cables that I trimmed the female leads off. I stripped back ~6" of the outer sheathing and secured them into a cord grip connector that screws into the threaded hole on the electrical box that is fastened to the end of the conduit. I wired everything up, white to white, black to black. It is a bad idea to rely on color alone at such voltages, so I verify hot, neutral continuity across the plug conductor and the lamp socket conductor. Everything checks out, so I screw on the wire nuts.
+
+### Final Assembly
+I slide the conduit in the cart post, close up the box by screwing on the face plate. I attach the box to the top of the conduit by sliding the set-screw connector over the conduit and tightening the screw. I plug it in, and _voila_. 
+
+## Thoughts
+The loop of flexible cord sprouting from the top of the box looks only a little bit silly. There is a cleaner way to do this involving more fittings and more time, but it is acceptable to me considering this is a seasonal cart adornment. I could route the wires internal to the conduit, attach a second box at the bottom, put a dimmer switch in it. Wire it to an IoT relay switch for automated control. Endless possibilities. Realistically I will do none of these things as there is almost no additional benefit to me or the plants, but it is satisfying to think how painless it would be to expand the system. I am happy that 2025 is going according to plan.
+
+## Update - Added Grow Panel
+We bought a 2 ft. shop light from Harbor Freight Tools and zip-tied it to the underside of the top shelf. Now all of the plants on the cart get great light year-round.
+
+{{< image 
+    src="images/grow-light-panel-light.JPG" 
+    caption="Plant light panel" >}}
+
+{{< image 
+    src="images/grow-light-panel.JPG" 
+    caption="Plant light panel" >}}
diff --git a/container/site/content/posts/hot-fudge/index.md b/container/site/content/posts/hot-fudge/index.md
new file mode 100644
index 0000000..82013e3
--- /dev/null
+++ b/container/site/content/posts/hot-fudge/index.md
@@ -0,0 +1,124 @@
++++
+categories = ["food"]
+date = 2025-02-22T11:51:00-06:00
+description = ""
+draft = false
+slug = "hot-fudge"
+title = "🍦 Hot Fudge"
+author = "nicholas"
++++
+
+I want to make the the [NYTimes Hot Fudge Sauce](https://cooking.nytimes.com/recipes/6094-hot-fudge-sauce) recipe. The recipe provides mostly volume measurements, so I will have to convert these to weight values. Also as usual, I will stubbornly substitute some ingredients for more shelf-stable and/or cheaper options.
+
+## NYTimes Recipe
+This is the list provided by the NYTimes recipe. Every single ingredient quantity except chocolate is provided by volume.
+
+| quantity | ingredient                              |
+| -------- | --------------------------------------- |
+| 2 cups   | heavy cream                             |
+| 4 tbsp   | unsalted butter                         |
+| ½ cup    | light brown sugar                       |
+| ¾ cup    | granulated sugar                        |
+| ¼ tsp    | fine sea salt                           |
+| 2 oz     | bittersweet chocolate (in small pieces) |
+| 1¼ cups  | sifted high-fat Dutch-process cocoa     |
+| ½ tsp    | vanilla extract                         |
+
+## Substitutions
+### heavy cream → (water + oil + dry milk powder)
+The recipe requires 2 cups of heavy cream. The density of heavy cream is something like 1.01 to 1.03 g/mL, so 2 cups of heavy cream weighs approximately 484 grams. I will use this weight as the basis for calculating the amounts of each substitution ingredient. I simply multiply their respective proportions by the total weight. The table below is the resulting values:
+
+**heavy cream nutrient breakdown**
+| nutrient      | proportion | weight |
+| ------------- | ---------- | ------ |
+| water         | 0.58       | 281    |
+| carbohydrates | 0.04       | 19     |
+| protein       | 0.02       | 10     |
+| milk fat      | 0.36       | 174    |
+
+The water and fat substitutions are trivial: water is water, and milk fat is (as far as the substitution is concerned) fat, but I still need to account for 19 grams **carbohydrates** and 10 grams **protein**. Heavy cream is a dairy product, basically milk. So I will replace the carbs and protein that is missing as a result of its absence with non-fat milk powder. This product is basically heavy cream with the water and fat removed.
+
+**non-fat milk powder nutrient breakdown**
+| nutrient      | proportion | weight |
+| ------------- | ---------- | ------ |
+| carbohydrates | 0.52       | 15     |
+| protein       | 0.35       | 10     |
+
+Non-fat milk powder has approximately what I am missing: 15 grams of carbs and 10 grams of protein. Good enough.
+
+**substitution breakdown**
+| nutrient      | substitution         | weight |
+| ------------- | -------------------- | ------ |
+| water         | water                | 281    |
+| carbohydrates | milk powder          | 29     |
+| protein       | milk powder          |        |
+| milk fat      | vegetable shortening | 174    |
+
+### unsalted butter → (water + oil)
+The recipe requires 4 tbsp. unsalted butter. This weighs 56 grams. Once again, however, I will substitute this relatively expensive ingredient with cheaper, more shelf stable ingredients: **oil** and **water**.
+
+**unsalted butter nutrient breakdown**
+| nutrient | proportion | weight |
+| -------- | ---------- | ------ |
+| milk fat | 0.80       | 45     |
+| water    | 0.2        | 11     |
+
+The substitution is 1:1:
+
+**substitution breakdown**
+| nutrient | substitution | weight |
+| -------- | ------------ | ------ |
+| milk fat | water        | 45     |
+| water    | water        | 11     |
+
+
+### fine sea salt → table salt
+The recipe requires 1/4 tsp. fine sea salt. I will be substituting fine sea salt with table salt, which has a relative density of 0.90. According to the label on my table salt, ¼ tsp. weighs 1.5 grams. I will need 1.35 grams of table salt. 
+
+### vanilla extract → imitation vanilla
+They really nailed this substitution. Imitation is functionally identical to vanilla extract. I substitute it 1:1.
+
+## Conversions
+I do not document every conversion here. Nutrition labels typically provide volume *and* weight values for a serving size. It is not very interesting.
+
+### Dutch-process cocoa
+This one is tricky. The recipe requires 1 ¼ US cups high-fat Dutch-process cocoa, sifted _then_ measured. I have no interest in learning how they scoop and measure their volume of cocoa powder, so I will just defer to the numbers provided on the nutrition label and convert directly. According to this, 1 Tbsp. weighs 6 grams, and I need 1.25 cups.
+
+*Tbsp in 1.25 cups*
+
+$1.25 \times 16 = 20$
+
+*grams of cocoa in 20 Tbsp.*
+
+$20 \times 6 = 120$
+
+**I will need 120 grams of Dutch process cocoa.**
+
+### Vanilla Extract
+ ½ tsp. vanilla extract has a density of close enough to 1.0 g/mL. 1 tsp. is 5 mL.
+
+**I will need 2.5 grams of vanilla extract.**
+
+## Result
+This table is the result of the substitutions and conversions above.
+
+| ingredient             | weight |
+| ---------------------- | ------ |
+| water                  | 292    |
+| oil                    | 219    |
+| nonfat dry milk powder | 29     |
+| granulated sugar       | 144    |
+| light brown sugar      | 96     |
+| salt                   | 1.35   |
+| bittersweet chocolate  | 57     |
+| dark cocoa powder      | 120    |
+| vanilla extract        | 2.5    |
+| _TOTAL_                | _961_  |
+
+### Process
+Naturally I will rewrite the process to account for my substitutions:
+
+1. In a saucepan, combine oil, sugars, water, and salt. Bring to a simmer over medium-low heat. Simmer 45 seconds. Add chocolate, and whisk to dissolve. Remove from heat, add cocoa, and whisk until no lumps remain.
+2. Return pan to low heat, and simmer sauce until glossy, whisking constantly, 20 seconds. Remove from heat, and stir in vanilla. Serve warm. 
+
+To reheat sauce, warm in a saucepan over low heat, stirring constantly. Do not boil.
diff --git a/container/site/content/posts/infrastructure-overhaul/index.md b/container/site/content/posts/infrastructure-overhaul/index.md
new file mode 100644
index 0000000..3220891
--- /dev/null
+++ b/container/site/content/posts/infrastructure-overhaul/index.md
@@ -0,0 +1,245 @@
++++
+categories = ["software"]
+tags = ["hypervisor","virtualization"]
+date = 2025-06-27T19:00:00-05:00
+description = ""
+draft = false
+slug = "infrastructure-overhaul"
+title = "🔨 Infrastructure Overhaul"
+author = "nicholas"
++++
+
+This overhaul of my infrastructure is mostly about **separating concerns**. The two main concerns being separated are: **storage** and **services**. Mainly, I am moving all of the containers off my storage server and onto their own machine. They call this **storage-service decoupling**. There are also some improvements I will make along the way.
+
+## ⚠️ Problems
+
+There are a couple main problems with current configuration that I will need to address:
+- Storage-device coupling
+- Miscellaneous *infrastructure smell* / anti-patterns
+
+**🔗 Storage-Service Decoupling**
+
+I was running a lot of containers on my so-called "storage" server, and this was eating into resources originally meant for ZFS, mainly RAM. Every service I added was jeopardizing the performance and integrity of my most precious piece of infrastructure. There is no *inherent* problem with this configuration, and there are even good reasons to have services local to the storage. After all, ZFS managed to carry on just fine for years in spite of being somewhat RAM-starved. However, I wanted to move services off my storage server so it could be free to simply **store** things in the way ZFS was designed. It seems the proper way.
+
+**💩 Miscellaneous Infrastructure Anti-Patterns**
+
+The overhaul of my infrastructure is also meant to remove a general sense that things were *wrong*. I was running Docker Desktop in Windows and Docker in Linux, across two different machines. Worse still, I was running a Kubernetes swarm inside a Docker container on a NAS server. Resources were spread across multiple machines and containers. Things like this, they smell. It is not *necessarily* wrong, but it *smells* wrong and I do not like it.
+
+## ✅ Solutions
+I go through the general solution to each of the problems presented above.
+
+### 1️⃣ MACHINE 1 (NAS Server)
+
+**Addressing storage-service coupling, anti-patterns**
+
+**(Debian → TrueNAS SCALE)**
+
+Since the storage server is no longer general purpose compute and storage, which requires the flexibility of a good general purpose OS (Debian 12), but instead **a dedicated NAS server**, I replace the OS with a dedicated NAS OS (TrueNAS SCALE) to make storage server management easier. TrueNAS SCALE comes with a all of the management tools/features I need. 
+
+I move the docker services off the Debian host and onto a VM on another machine.
+
+**NAS Configuration Diagram**
+
+```mermaid
+graph LR
+subgraph host2["NAS (TrueNAS SCALE)"]
+        subgraph zpool[ZFS Pool]
+            subgraph nfs[NFS Dataset]
+                nfsshare[NFS Shares]
+            end
+            subgraph smb[SMB Dataset]
+               smbshare[SMB Shares]
+            end
+        end
+    end
+```
+---
+
+#### 🔂 Process
+The process of migrating from Debian to TrueNAS SCALE is straightforward, mostly thanks to highly portable nature of ZFS pools and my decision to store almost everything important there. I do not need to move any Docker-related files since they are stored on the ZFS pool. I can painlessly wipe the OS disk without worrying about destroying anything important. This is the way it should be.
+
+The rest of the process involves configuration in TrueNAS SCALE, including things like configuring datasets, shares, users, email alerts, etc.
+
+- Make bootable USB with [Etcher tool](https://etcher.balena.io/)
+- Make backups of important OS disk configuration files, etc.
+  - cron, etc.
+- Export ZFS pool
+  - `sudo zpool export data-pool`
+- Boot into TrueNAS SCALE installer environment and install OS
+- Import ZFS pool in TrueNas SCALE web GUI
+
+✅ Done. Basic storage functionality is now restored to the NAS server.
+
+{{< image  
+    src="images/truenas-scale-memory-usage.PNG"
+    caption="TrueNAS SCALE using every bit of RAM it can" >}}
+
+{{< image 
+    src="images/truenas-scale-storage.PNG"
+    caption="TrueNAS SCALE storage information" >}}
+
+---
+
+#### 💾 ZFS, Datasets Configurations
+
+Next I need to complete some configuration to restore complete functionality to my service and network storage.
+
+- **Creating ZFS datasets for each service**
+    - ✅ Separation of concerns -- isolates data per service. Makes resources more manageable, secure, fault tolerant
+    - ✅ Granular control per dataset (compression, quotas, ACLs)
+    - ✅ Snapshot/replication: Enables service-specific backups
+- **Create, configure POSIX service users, groups**
+- **Configure POSIX permissions, ACLs for users**
+    - ✅ Principle of least privilege
+    - ✅ ACLs allow flexible permit
+- **Share datasets**
+    - NFS shares (**Linux** clients):
+        - Kubernetes PVs
+    - SMB shares (**Windows** clients):
+        - Nicholas
+        - User 2
+        - ...
+    - ✅ Dedicated storage per workload: benefit from ZFS performance and integrity
+ 
+ #### 📧 Email Alerts Configuration
+ I configured my old Debian OS to [send email via Amazon SES]({{< relref "posts/email-alerts">}}), so I will want to replicate this in TrueNAS SCALE. Luckily, I do not have to re-implement my email alerts since this feature is built-in to the OS. I just need to configure a few things in TrueNAS GUI:
+
+ {{< image 
+    src="images/truenas-scale-email-alert-configuration.png" 
+    caption="📧 TrueNAS SCALE alert email configuration"
+    width="400" >}}
+
+
+ {{< image 
+    src="images/truenas-scale-alert-email-test.png" 
+    caption="✅ TrueNAS SCALE alert email test success" >}}
+
+That is pretty much it.
+
+### 2️⃣ MACHINE 2 (SERVER)
+
+**Windows + Hyper-V**
+
+This machine runs on relatively powerful hardware, which I would not like to waste by handing it *all* over to container services. The host OS will remain **Windows**, which I will use as a normal workstation. The **Docker** and **Kubernetes** services will run in virtual machines under **Hyper-V** hypervisor.
+
+```mermaid
+graph LR
+    subgraph host1["SERVER (Windows)"]
+        subgraph hypervisor["Hypervisor (Hyper-V)"]
+            subgraph vm1[Ubuntu Server VM 1]
+                docker[Docker]
+            end
+            subgraph vm2[Ubuntu Server VM 2]
+                kubernetes[Kubernetes host]
+            end
+        end 
+    end
+```
+
+#### 🔂 Process
+All I need to do here is install Windows OS on the machine and provision 2 VMs. The basic setup process is as follows:
+- Make bootable USB with [Etcher tool](https://etcher.balena.io/)
+- Make backups of important files:
+    - Basically nothing. Once again, everything I care about is stored on the NAS server pool.
+- Boot into Windows installer environment and install OS
+- Configure 2 VMs:
+    - Ubuntu Server (Docker host)
+    - Ubuntu Server (Kubernetes host)
+
+✅ Done. Basic desktop service and container infrastructure is restored to Server.
+
+{{< image 
+    src="images/windows-hyper-v-containers.png" 
+    caption="Windows Hyper-V containers" >}}
+
+#### 🖥️ VM Configuration
+
+- Install Ubuntu Server on each VM
+- On Kubernetes VM:
+    - Install Snap Microk8s package
+- On Docker VM:
+    - Install Docker Engine
+- Create `Netplan` configuration files:
+    - Static IPs
+    - DNS search address
+
+### 🌐 DNS Configuration
+I need to configure my DNS to resolve the correct addresses inside my network. Each service is hosted at its own URL, e.g. `https://personal-website.domain.com`. To reach this, I need:
+- `A` records for each host
+- `CNAME` records for each service
+
+|Record Type|Name|Value|
+|-|-|-|
+|A|docker.domain.com|192.168.1.2|
+|A|kubernetes.domain.com|192.168.1.3|
+|CNAME|personal-website.domain.com|kubernetes.domain.com|
+|CNAME|pastebin.domain.com|docker.domain.com|
+
+This set of DNS records will resolve client requests to the right hosts. On each host, traffic will need to be routed to the right container/service. To do this on the Docker host, I use **NGINX reverse proxy** to route incoming requests to the correct backend container based on the domain name.
+
+**e.g.**
+|Service|FQDN|External Port|Container Port|
+|-|-|-|-|
+|PasteBin|pastebin.domain.com|443|8000|
+
+On the Kubernetes host, I use **Ingress** controller (NGINX-based) that serves as the reverse proxy in the same way.
+
+---
+
+### 👀 Infrastructure Diagrams
+I diagram the relationships between the NAS server and the Linux and Windows clients below. I produce 2 different diagrams only for clarity. Also for clarity, I only show **example** services and storage, not the actual configuration present on my machine.
+
+**🗺️ Infrastructure topology (Windows Client)**
+
+```mermaid
+graph TD
+    subgraph windows[Windows]
+        n[nicholas]
+        user2[User 2]
+    end
+    subgraph nas[NAS]
+        subgraph smb[SMB Shares]
+            smbuser2[User 2 Data]
+            smbn[Nicholas Data]
+        end
+    end
+
+    n <-- SMB share --> smbn
+    user2 <-- SMB share --> smbuser2
+```
+
+---
+
+**🗺️ Infrastructure topology (Linux Clients)**
+
+```mermaid
+graph TD
+    subgraph windows[Windows VMs]
+        subgraph kubernetes[Kubernetes]
+            weblog[Web Log]
+        end
+        subgraph docker[Docker]
+            pastebin[PasteBin]
+        end
+    end
+    subgraph nas[NAS]
+        subgraph nfs[NFS Shares]
+            weblogfiles[Web Log Files]
+            pastebindata[Pastebin Files]
+        end
+    end
+
+    weblogfiles <-- Kubernetes Persistent Volume --> weblog
+    pastebindata <-- Docker Volume --> pastebin
+```
+
+---
+
+## 📝 Summary
+- Move containers/services off NAS server
+- Switch NAS server OS to TrueNAS SCALE for purpose-built storage management features
+- Configure two VMs that become new Kubernetes and Docker hosts
+- Host VMs in Hyper-V hypervisor on Windows OS
+- Centralize persistent container storage in Kubernetes and Docker using NAS server NFS/SMB shares 
+
+✅ Done.
\ No newline at end of file
diff --git a/container/site/content/posts/ipcam-timelapse/index.md b/container/site/content/posts/ipcam-timelapse/index.md
new file mode 100644
index 0000000..cab38fd
--- /dev/null
+++ b/container/site/content/posts/ipcam-timelapse/index.md
@@ -0,0 +1,204 @@
++++
+categories = ["software"]
+tags = ["docker"]
+date = 2024-04-18T17:00:33Z
+description = ""
+draft = false
+slug = "ipcam-timelapse"
+title = "📹 IP Camera Time-lapse in Frigate"
+author = "nicholas"
++++
+
+I have a container running `Frigate`, which captures and republishes a feed from my security camera overlooking the area beyond my deck. I will periodically capture a frame from this stream for some time, and compile the frames into time-lapses using `ffmpeg`
+
+{{< image 
+    src="images/ip-cam-mounted.JPG" 
+    caption="IP camera mounted" >}}
+
+{{< image 
+    src="images/ip-cam-view.JPG" 
+    caption="IP camera view of deck overlooking the neighborhood" >}}
+
+## Docker Container - Frigate
+As I mention above, I am already using `Frigate` to manage my IP camera stream for things like object detection, recording, and other such functions that are common in video management systems. The software lacks built-in features relating to time-lapses, but this is easily implemented through other means.
+## Docker Compose
+First, I include here the basic `docker-compose.yml` file that I use to get a `Frigate` container up and running. Not a lot of software configuration is defined here, this will mostly be done later in the frigate configuration file.
+
+```yaml
+services:
+  frigate:
+    container_name: frigate
+    privileged: true
+    restart: unless-stopped
+    image: ghcr.io/blakeblackshear/frigate:stable
+    shm_size: "512mb"
+    devices:
+      - /dev/dri/renderD128 # for intel hwaccel
+    volumes:
+      - /etc/localtime:/etc/localtime:ro
+      - ${HOST_PATH_CONFIG}:/config
+      - ${HOST_PATH_MEDIA}:/media/frigate
+      - type: tmpfs # Optional: 1GB of memory, reduces SSD/SD Card wear
+        target: /tmp/cache
+        tmpfs:
+          size: 1000000000
+    ports:
+      - "${PORT}:5000"
+      - "8554:8554" # RTSP feeds
+      - "8555:8555/tcp" # WebRTC over tcp
+      - "8555:8555/udp" # WebRTC over udp
+    environment:
+      - FRIGATE_CAMERA_USER=${FRIGATE_CAMERA_USER}
+      - FRIGATE_CAMERA_PASSWORD=${FRIGATE_CAMERA_PASSWORD}
+```
+
+```
+PORT=<port number>
+HOST_PATH_CONFIG=<host path for config>
+HOST_PATH_MEDIA=<host path for media>
+```
+
+This is my frigate configuration file config.yml. In this configuration, I am not recording or capturing snapshots of anything, which are major features of frigate. Instead I am using frigate to monitor the feed in real time and to periodically grab frames from the stream it publishes. In other words, it is superfluous to use frigate for the purpose of capturing frames. One could go straight to the source RTSP stream and circumvent the re-stream. But I do this anyway because sometimes I like to capture videos of squirrels and birds using frigate's object detection.
+
+```yaml
+ui:
+  live_mode: mse
+
+mqtt:
+  enabled: false
+
+go2rtc:
+  streams:
+    deck:
+      - rtsp://{FRIGATE_CAMERA_USER}:{FRIGATE_CAMERA_PASSWORD}@192.168.1.200:554//h265Preview_01_main
+
+birdseye:
+  enabled: false
+  mode: continuous
+
+cameras:
+  deck: # <------ Name the camera
+    objects:
+      track:
+        - person
+        - animal
+    ffmpeg:
+      inputs:
+        - path: rtsp://127.0.0.1:8554/deck
+          roles:
+            - record
+            - detect
+      hwaccel_args: preset-vaapi
+      input_args: -tag:v hvc1
+      output_args:
+        record: preset-record-generic-audio-copy
+
+record:
+  enabled: false
+  events:
+    pre_capture: 2
+    post_capture: 2
+    objects:
+      - animal
+
+snapshots: # <----- Enable snapshots
+    enabled: false
+
+detect:
+  enabled: false
+  width: 3840
+  height: 2160
+
+detectors:
+  ov:
+    type: openvino
+    device: AUTO
+    model:
+      path: /openvino-model/ssdlite_mobilenet_v2.xml
+
+model:
+  width: 300
+  height: 300
+  input_tensor: nhwc
+  input_pixel_format: bgr
+  labelmap_path: /openvino-model/coco_91cl_bkgr.txt
+  labelmap:
+    15: animal
+    16: animal
+    17: animal
+```
+
+
+
+```shell
+    sudo docker compose up -d
+```
+
+
+
+# Time-lapse Parameters
+
+The goal is to compress a month (30 days) of time into a minute.
+
+
+## Clip Duration
+
+The view from my deck is not so exciting, so I do not want time-lapse clip to last too long. I settled on 1 minute.
+
+
+## Frame rate
+
+I want the video to be very smooth, so I chose 60 frames per second. This should be plenty. I can change my mind when I generate a video using ffmpeg's -framerate {framerate} option because I am storing each individual frame as a .png file.
+
+
+## Interval
+
+The interval follows from the frame rate and clip duration. The interval is a function of clip duration and frame rate.
+
+The relationship between these variables can be expressed:
+
+duration = frames * framerate
+interval = duration / framerate
+
+
+
+# Capturing Frames from Frigate
+
+```sh
+#!/bin/sh
+
+time=`date '+%Y_%m_%d__%H_%M_%S'`;
+
+StorageFileName=$time.png
+
+/usr/bin/ffmpeg -rtsp_transport tcp -i rtsp://<username>:<password>@<IP address>/Preview_<channel number>_<stream type> -ss 1 -frames:v 1 -update 1 <path>/$StorageFileName
+```
+
+Here we use ffmpeg to capture the frames and store them as png files according to the time it was captured. This script runs every 12 minutes via cron:
+
+
+```sh 
+    crontab -e
+    */12 * * * * <path_to_timelapse.sh>
+``` 
+
+This is the command I use to generate a video.
+
+  
+```shell
+ffmpeg -framerate 60 -pattern_type glob -i '*.png' -c:v libx265 -crf 28 -preset ultrafast -s 2k 28_ultrafast.mp4 
+```
+{{< image 
+    src="images/timelapse.gif" 
+    caption="Timelapse" >}}
+
+{{< video
+  src="videos/timelapse-multiday.mp4"
+  width="100%" >}}
+
+{{< video
+  src="videos/timelapse-deck-planter.mp4"
+  width="100%" >}}
+
+
+ReoLink RLC-810WA
\ No newline at end of file
diff --git a/container/site/content/posts/jenkins-deploy-web-log/index.md b/container/site/content/posts/jenkins-deploy-web-log/index.md
new file mode 100644
index 0000000..603600b
--- /dev/null
+++ b/container/site/content/posts/jenkins-deploy-web-log/index.md
@@ -0,0 +1,319 @@
++++
+categories = ["software"]
+tags = ["automation","docker","jenkins","nginx"]
+date = 2025-04-06T10:18:00-06:00
+description = ""
+draft = false
+slug = "jenkins-deploy-web-log"
+title = "🚀 Hugo Site Deployment - Automating and Version Tracking"
+author = "nicholas"
++++
+
+I am using the static site generator `Hugo` to generate the web log site that currently hosts this content. Currently, my site is hosted on my local network using `hugo server`:
+
+> Hugo provides its own webserver which builds and serves the site. While hugo server is high
+> performance, it is a webserver with limited options. 
+
+This has worked great since I have been using the embedded webserver for development purposes -- each time I make changes to the watched files, Hugo rebuilds and live-reloads the site. This is convenient for development purposes, so I will continue to use it in this way.
+
+For production, though, since I will be publishing the site to the public internet, I will use a more configurable webserver, **Nginx**, to serve the site. 
+
+I will also begin to use Git in my workflow, which will require some configuration on its own, including **Git LFS**, and **hooks**.
+I will create a Jenkins agent capable of building a hugo site. For this I will build a custom Docker image based on the **Jenkins inbound agent**.
+
+---
+
+## Git
+Currently, my site is not edited using any kind of version control. I simply save files to a directory and the built-in Hugo server serves the site to the local machine. I will develop a new workflow so that changes are tracked and managed via **Git**. This will introduce a little complexity, but worth the benefits:
+ - Changes made to the project will be tracked, allowing for easy rollback to previous versions and a clear history of changes.
+ - Storing the site in a Git repository protects against data loss/corruption, as the original code will always be accessible remotely or among a local clone.
+  
+
+ ### Git LFS
+ My site contains many images and videos, which are relatively large files and are therefore not handled well by Git by default. I will use **Git LFS** to manage these file types so that my repo does not become slow. For each file type I wish to be managed by Git LFS (i.e. `.jpg`, `.mp4`, `.webm`, etc.), I run `git lfs track "*.jpg"` in the repository root. This creates an entry in `.gitattributes`, a file which Git uses to match and intercept committed files to store them in the repository as pointers, instead of the actual image or video. The actual data is stored outside of the repo, in the LFS data storage I have configured on Gitea.
+
+#### `.gitattributes`
+```gitattributes
+*.png filter=lfs diff=lfs merge=lfs -text
+*.PNG filter=lfs diff=lfs merge=lfs -text
+*.jpg filter=lfs diff=lfs merge=lfs -text
+*.JPG filter=lfs diff=lfs merge=lfs -text
+*.mp4 filter=lfs diff=lfs merge=lfs -text
+*.MP4 filter=lfs diff=lfs merge=lfs -text
+*.webm filter=lfs diff=lfs merge=lfs -text
+```
+
+### Git Submodules
+Since my repo contains a Hugo theme that is itself a git repo, which was added to the repo as a submodule, I will need to be sure to include the theme repo when I clone from the repository, using the flag `--recurse-submodules`, e.g. `git clone --recurse-submodules https://git.uuard.com/nicholas/web-log.git`
+
+This will be relevant when I write configure a Jenkins pipeline to clone and build the site. It will need to include some way of cloning the submodules.
+
+---
+
+## NGINX Webserver
+I run a NGINX webserver on my host machine, whose current primary purpose is to serve as a reverse proxy for my varied local docker services. I will modify the configuration so that I can serve my web log site.
+
+I need to create a file in `/etc/nginx/sites-available/` and symlink it to `/etc/nginx/sites-enabled/`. This is a typical pattern for managing multiple sites that allows me to organize the configurations, one configuration file per site.
+
+#### `web-log` Site Configuration
+- This configuration file will serve my web log at `log.nicholas.uuard.com`. Nginx listens on both port `80` and port `443`. The first server block listens on port 80, and will perform a redirect request from the URL over HTTP (port 80) to HTTPS (port 443). In the second server block, the `root` is set to `/var/www/web-log/public`, which is the host directory where the Jenkins build agent container will copy the built Hugo site.
+
+```nginx
+server {
+    listen 80;
+    server_name log.nicholas.uuard.com www.log.nicholas.uuard.com;
+    return 301 https://$server_name$request_uri;
+}
+
+server {
+    listen 443 ssl http2;
+    listen [::]:443 ssl http2;
+    server_name log.nicholas.uuard.com www.log.nicholas.uuard.com;
+    server_tokens off;
+    ssl_certificate /etc/letsencrypt/live/uuard.com/fullchain.pem;
+    ssl_certificate_key /etc/letsencrypt/live/uuard.com/privkey.pem;
+    ssl_protocols TLSv1.2 TLSv1.3;
+    ssl_ciphers 'TLS_AES_128_GCM_SHA256:TLS_AES_256_GCM_SHA384:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384';
+    ssl_prefer_server_ciphers on;
+    root /var/www/web-log/public;
+    index index.html index.htm;
+    gzip on;
+    gzip_types text/plain text/css application/javascript application/json image/svg+xml;
+
+    location / {
+        try_files $uri $uri/ =404;
+    }
+}
+```
+---
+Now I can symlink the file to the `sites-enabled` directory. Nginx loads configuration files from the `sites-enabled` directory at startup or when the configuration is reloaded, so I will need to to reload the `nginx` service:
+
+```shell
+sudo ln -s /etc/nginx/sites-available/web-log /etc/nginx/sites-enabled/
+sudo service nginx reload
+```
+
+---
+
+## Custom Jenkins Agent Image
+Since I will be building my site on a Jenkins agent, it will need to be able to run `hugo` commands. I will create a custom Dockerfile to build a new image from the `jenkins/inbound-agent` base image that includes the `hugo` binary.
+
+### Dockerfile
+```Dockerfile
+FROM jenkins/inbound-agent:latest-jdk17
+
+USER root
+
+# set hugo version, architecture
+ENV DEBIAN_FRONTEND=noninteractive \
+    HUGO_VERSION=0.145.0 \
+    HUGO_ARCH=Linux-64bit
+
+# install wget, hugo; cleanup
+RUN apt-get update && \
+    apt-get install -y --no-install-recommends wget && \
+    wget -q https://github.com/gohugoio/hugo/releases/download/v${HUGO_VERSION}/hugo_${HUGO_VERSION}_${HUGO_ARCH}.tar.gz && \
+    tar -xzf hugo_${HUGO_VERSION}_${HUGO_ARCH}.tar.gz && \
+    mv hugo /usr/bin/hugo && \
+    chmod +x /usr/bin/hugo && \
+    rm hugo_${HUGO_VERSION}_${HUGO_ARCH}.tar.gz && \
+    apt-get clean && \
+    rm -rf /var/lib/apt/lists/*
+```
+
+### Build Custom Jenkins Agent
+Now I need to build the image:
+`docker build -t jenkins-agent-hugo .`
+
+```shell
+[+] Building 6.9s (6/6) FINISHED                                     docker:default
+ => [internal] load build definition from Dockerfile                           0.0s
+ => => transferring dockerfile: 689B                                           0.0s
+ => [internal] load metadata for docker.io/jenkins/inbound-agent:latest-jdk17  0.5s
+ => [internal] load .dockerignore                                              0.0s
+ => => transferring context: 2B                                                0.0s
+ => CACHED [1/2] FROM docker.io/jenkins/inbound-agent:latest-jdk17@sha256:6b4  0.0s
+ => [2/2] RUN apt-get update && apt-get install -y --no-install-recommend      5.7s
+ => exporting to image                                                         0.5s
+ => => exporting layers                                                        0.5s
+ => => writing image sha256:ae480b018a3928e5c0dede760431eff64a2cabec46e266ab3  0.0s
+ => => naming to docker.io/library/jenkins-agent-hugo                          0.0s
+ ```
+
+This will create a docker image named `jenkins-agent-hugo`. I verify this by listing the docker images:
+`docker image list`. 
+
+| REPOSITORY         | TAG    | IMAGE ID     | CREATED       | SIZE  |
+| ------------------ | ------ | ------------ | ------------- | ----- |
+| jenkins-agent-hugo | latest | ae480b018a39 | 2 minutes ago | 336MB |
+
+---
+
+## Jenkins Node (agent)
+I have created the Docker image necessary to run a containerized build agent that will be able to build and deploy the Hugo website. Before I can run the container though, I need to create and configure a Jenkins node that corresponds to the agent. This will allow me to connect the Jenkins orchestrator to the container agent.
+
+- **Name**: "hugo"
+- **Launch method**: Launch agent by connecting it to the controller
+- **Home directory**: `/home/jenkins`
+- **Labels**: "hugo"
+
+I save the configuration and navigate to the Agent status page where Jenkins provides a command to run the agent. I do not run this command, but extract the `secret` value for later use in the agent container.
+
+This is an example of the command Jenkins provides. I need the string that follows `... -secret`
+```shell
+curl -sO https://build.uuard.com/jnlpJars/agent.jar;java -jar agent.jar -url https://build.uuard.com/ -secret f1f50517be8c46348997c91fb05c5ad73cb13a761a4cce0e5dfcfc6ffb5d8afe -name hugo -webSocket -workDir "/home/jenkins"
+```
+
+---
+
+## Jenkins Pipeline
+I set up a new Jenkins **pipeline** item named `web-log-pipeline` with basically the same configuration as in my [other post]({{< relref "posts/jenkins-deploy-website/#improvements---git-hook" >}}) that covers this. One difference is in the *Advanced sub-modules behaviors*. I want to enable the *Recursively update submodules* option so that the `checkout scm` step of the Build stage of the pipeline will also clone the theme submodule.
+
+{{< image 
+    src="images/jenkins-update-submodules.jpg" 
+    caption="recursively update submodules" >}}
+
+That is all.
+
+---
+
+## Docker Compose
+As usual, I will configure my docker container with a compose file:
+
+```yaml
+services:
+  jenkins-agent-hugo:
+    container_name: jenkins-agent-hugo
+    hostname: jenkins-agent-hugo
+    image: jenkins-agent-hugo
+    init: true
+    command: ["-url", "${AGENT_URL}", "${AGENT_SECRET}", "${AGENT_NAME}"]
+    restart: unless-stopped
+    volumes:
+      - /var/www/:/mnt/jenkins_deployments/
+```
+This file references environment variables stored in `.env`
+The `AGENT_SECRET` value came from the step above.
+
+```env
+AGENT_URL=https://build.uuard.com
+AGENT_SECRET=4897df9u4jf...
+AGENT_NAME=hugo
+```
+The container is configured for a bind-mount that mounts the host directory `/var/www/` to the container directory `/mnt/jenkins_deployments/`. 
+
+
+The Jenkins agent will be configured to build to `/mnt/jenkins_deployments/web-log/public`, which maps to the Nginx site directory on the host: `/var/www/web-log/public`. 
+
+Once the container is running, I can check its status in Jenkins and verify that the agent can build hugo sites.
+
+{{< image 
+    src="images/jenkins-hugo-connected.jpg" 
+    caption="Jenkins 'hugo' agent status" >}}
+
+I can visit the **Script Console** and run the following groovy script. This will print out what version of Hugo is installed. 
+
+```groovy
+def hugoVersion = "hugo version".execute().text.trim()
+println "Hugo version: ${hugoVersion}"
+```
+
+{{< image 
+    src="images/jenkins-hugo-version.jpg" 
+    caption="hugo version confirmed" >}}
+
+This confirms that my agent has `hugo` installed. I will be able to run builds using this agent.
+
+---
+
+## Configuring Jenkins Agent
+I will include this `Jenkinsfile` in the repository. The Jenkins pipeline will be configured according to this document.
+### Jenkinsfile
+```Jenkinsfile
+pipeline {
+    agent { label 'hugo' }
+    environment {
+        DEPLOY_DIR = '/mnt/jenkins_deployments/web-log'
+    }
+    stages {
+        stage('checkout') {
+            steps {
+                checkout scm
+            }
+        }
+        stage('hugo build') {
+            steps {
+                sh 'hugo --environment production --minify'
+            }
+        }
+        stage('deploy') {
+            steps {
+                sh """
+                    find ${DEPLOY_DIR} -mindepth 1 -delete
+                    cp -r ${WORKSPACE}/public ${DEPLOY_DIR}/
+                    chmod -R 755 ${DEPLOY_DIR}
+                """
+            }
+        }
+    }
+    post {
+        failure {
+            echo 'Build failed!'
+        }
+    }
+}
+```
+#### Jenkinsfile pipeline definition details
+- **Pipeline Declaration**
+  - Defines a declarative pipeline with `pipeline {}` block.
+
+- **Agent**
+  - `agent { label 'hugo' }` → Runs on any agent with the label 'hugo'.
+
+- **Environment Variables**
+  - `DEPLOY_DIR = '/mnt/jenkins_deployments/web-log'`: Sets the deployment directory path, which corresponds to the bind-mount defined in the `docker-compose.yml` file. This maps to `/var/www/web-log` on the host.
+  
+- **Stage: checkout**
+  - `checkout scm` Retrieves the source code from gitea (scm is configured in the Jenkins pipeline)
+
+- **Stage: hugo build**
+  - `hugo --environment production --minify` builds and minifies the hugo site. Sets the `environment` to `production` with the `--environment` flag. Outputs to `public` directory in the workspace.
+
+- **Stage: deploy**
+  - Runs shell commands in `sh """ ... """` block: 
+    - `find ${DEPLOY_DIR} -mindepth 1 -delete` → Deletes existing files in the deployment directory.
+    - `cp -r ${WORKSPACE}/public ${DEPLOY_DIR}/` → Copies all files from the `public` directory in the workspace to the deployment directory.
+    - `chmod -R 755 ${DEPLOY_DIR}` → Sets permissions for readability and execution.
+
+- **Post Actions**
+  - `post { failure { echo "Build Failed" } }` → Displays `"Build Failed"` if any stage fails.
+
+
+
+### Jenkins Pipeline configuration
+I use mostly the same configuration as here:
+
+[Jenkins Pipeline Configuration]({{< relref "posts/jenkins-deploy-website/#jenkins-pipeline-configuration" >}})
+
+```yaml
+Definition: Pipeline script from SCM
+SCM: Git
+Repositories:
+  - Repository URL: https://git.uuard.com/nicholas/web-log.git
+  - Credentials: gitea
+Branches to build:
+  - Branch Specifier: */master
+Script Path: Jenkinsfile
+```
+
+## Git Hook
+To be fully automated, I need to configure a Git hook that will trigger the Jenkins agent to build and deploy the site. Since I cover this in a [previous post]({{< relref "posts/jenkins-deploy-website/#improvements---git-hook" >}}), I do not repeat myself here. There is nothing really different about this hook except the `POST` request URL defined in the script. The pipeline has a different name `web-log-pipeline` and therefore a different URL.
+
+## Result
+Jenkins successfully deployed the Hugo site.
+
+{{< image 
+    src="images/jenkins-build-hugo-success.jpg" 
+    caption="Successful hugo site deployment" >}}
+
+Done.
\ No newline at end of file
diff --git a/container/site/content/posts/jenkins-deploy-website/index.md b/container/site/content/posts/jenkins-deploy-website/index.md
new file mode 100644
index 0000000..440e8a4
--- /dev/null
+++ b/container/site/content/posts/jenkins-deploy-website/index.md
@@ -0,0 +1,191 @@
++++
+categories = ["software"]
+tags = ["automation","docker","jenkins","nginx"]
+date = 2025-03-30T18:00:00-06:00
+description = ""
+draft = false
+slug = "jenkins-deploy-website"
+title = "🤵🏻 Automating Personal Website Deployment"
+author = "nicholas"
++++
+
+I have a simple [personal website](https://nicholas.uuard.com/) that currently serves as a landing page containing links that direct visitors to my other websites. I want to use Jenkins to automate the deployment of this site. In my [last post on this topic]({{< relref "posts/jenkins" >}}), I set up a Jenkins web UI and build agent in container using Docker. I will use this container to automate the process of deploying my website. 
+
+## The plan
+I will configure Jenkins to monitor the `main` branch of my [website repository](https://git.uuard.com/Ward/personal-website) and copy the repo to a host directory that is bind-mounted to both my Jenkins and Nginx containers. This host directory will be bind-mounted to Nginx's document root so the website is automatically published to the web server.
+
+## Jenkins
+I am using a pipeline definition based on a **pipeline script from SCM**. Instead of storing the pipeline script in Jenkins directly, I will use the script defined in the repository. This has the benefit of being much easier to maintain, as I only need to make changes to the repository. It fully automates the process by eliminating the step where I must configure the pipeline script before I push changes. Below is the Jenkinsfile I used to test my setup.
+
+### Jenkins pipeline configuration
+- First, I need to add a new pipeline item to Jenkins.
+
+{{< image 
+    src="images/jenkins-new-pipeline.jpg" 
+    caption="New pipeline 'personal-website-pipeline'" >}}
+
+- Next I configure the pipeline with the following settings:
+{{< image 
+    src="images/jenkins-pipeline-configuration.jpg" 
+    caption="person-website-pipeline settings" >}}
+
+I have formatted the relevant settings in YAML below:
+```yaml
+Definition: Pipeline script from SCM
+SCM: Git
+Repositories:
+  - Repository URL: https://git.uuard.com/Ward/personal-website.git
+  - Credentials: gitea
+Branches to build:
+  - Branch Specifier: */main
+Script Path: Jenkinsfile
+```
+#### Jenkins pipeline configuration details
+- **Pipeline Definition**  
+  - The pipeline is defined as a **Pipeline script from SCM**, meaning the Jenkinsfile is stored in the repository rather than inside Jenkins itself.
+
+- **Source Code Management (SCM) Settings**  
+  - **SCM: Git** → Jenkins fetches the pipeline from a Git repository.  
+  - **Repository URL: `https://git.uuard.com/Ward/personal-website.git`** → This is the Git repository where the Jenkinsfile and source code are stored.  
+  - **Credentials: `gitea`** → Authentication is handled using stored credentials for Gitea.  
+
+- **Branch to Build**  
+  - **Branch Specifier: `*/main`** → Jenkins monitors and builds from the `main` branch.  
+
+- **Script Path**  
+  - **`Jenkinsfile`** → Jenkins looks for the pipeline script inside the repository at this path.  
+
+
+### Jenkinsfile pipeline definition
+```Jenkinsfile
+pipeline {
+    agent any
+    environment {
+        DEPLOY_DIR = '/var/jenkins_home/deployments/personal-website'
+    }
+    stages {
+        stage('Checkout') {
+            steps {
+                checkout scm
+            }
+        }
+        stage('copy to nginx server') {
+            steps {
+                sh """
+                    rm -rf ${DEPLOY_DIR}/*
+                    cp -r * ${DEPLOY_DIR}/
+                    chmod -R 755 ${DEPLOY_DIR}
+                """
+            }
+        }
+    }
+    post {
+        failure {
+            echo "Build Failed"
+        }
+    }
+}
+```
+#### Jenkinsfile pipeline definition details
+- **Pipeline Declaration**
+  - Defines a declarative pipeline with `pipeline {}` block.
+
+- **Agent**
+  - `agent any` → Runs on any available Jenkins agent. I am currently building on the built-in node (agent).
+
+- **Environment Variables**
+  - `DEPLOY_DIR = '/var/jenkins_home/deployments/personal-website'`: Sets the deployment directory path. This path is inside the Docker volume `jenkins-data`. The `var/jenkins_home/deployments/personal-website` directory has been bind-mounted to a directory on the host machine, which is also shared as a bind-mount to the document root of Nginx web server running in a separate Docker container. 
+
+- **Stage: Checkout**
+  - `checkout scm` Retrieves the source code from gitea (scm is configured in the Jenkins pipeline)
+
+- **Stage: Copy to Nginx Server**
+  - Runs shell commands in `sh """ ... """` block: 
+    - `rm -rf ${DEPLOY_DIR}/*` → Deletes existing files in the deployment directory.
+    - `cp -r * ${DEPLOY_DIR}/` → Copies all files from the workspace to the deployment directory.
+    - `chmod -R 755 ${DEPLOY_DIR}` → Sets permissions for readability and execution.
+
+- **Post Actions**
+  - `post { failure { echo "Build Failed" } }` → Displays `"Build Failed"` if any stage fails.
+
+### Jenkins Container Configuration
+I need to modify the `docker-compose.yml` file to reflect my description above of how the whole system should work. I add a bind-mount to the **host** directory `nginx-personal-website/html` (which my webserver will also have bind-mounted) to the **container** directory at `var/jenkins_home/deployments/personal-website`. In the pipeline definition above I set the `DEPLOY_DIR` to map to this container directory.
+
+```yaml
+services:
+  jenkins:
+    image: jenkins/jenkins:jdk17
+    container_name: jenkins
+    hostname: jenkins
+    restart: always
+    volumes:
+      - jenkins-data:/var/jenkins_home/
+      - ../nginx-personal-website/html:/var/jenkins_home/deployments/personal-website
+    ports:
+      - "2376:2376"
+      - "8882:8080"
+      - "50000:50000"
+
+volumes:
+  jenkins-data:
+    external: true
+```
+## Nginx
+I will use an Nginx container for my web server. The container will simply serve whatever content is in the document root, in this case `/usr/share/nginx/html`. This is the behavior of Nginx, and I can change this by supplying a different configuration. For now, the default configuration is enough. I can add custom configuration later.
+
+### Nginx Container
+```yaml
+services:
+  nginx:
+    image: nginx:alpine
+    container_name: nginx-personal-website
+    restart: unless-stopped
+    ports:
+      - "8800:80"
+    volumes:
+      - ./html:/usr/share/nginx/html:ro
+      #- ./conf:/etc/nginx:ro
+```
+
+## Testing
+As soon as I push a change to the `main` branch of my repo, Jenkins should execute the pipeline script defined in the `Jenkinsfile`. 
+{{< image 
+    src="images/jenkins-pipeline-run-overview.jpg" 
+    caption="Jenkins test build - success" >}}
+
+## Improvements - Git Hook
+Polling is bad and Jenkins agrees. In the tooltip for selecting `Poll SCM` build trigger:
+
+> Note that this is going to be an expensive operation for CVS, as every polling requires 
+> Jenkins to scan the entire workspace and verify it with the server. Consider setting up a   
+> "push" trigger to avoid this overhead, as described in this document
+
+So instead I select **Trigger builds remotely (e.g., from scripts)** 
+
+{{< image 
+    src="images/jenkins-trigger-build-remotely.jpg" 
+    caption="trigger builds remotely" >}}
+
+To accomplish triggering builds remotely, I will implement a hook that executes a script after I push to the repository. The script will send a post request to Jenkins which will trigger the build.
+
+This script goes in the `gitea/data/git/repositories/<user>/<repository.git>/hooks/post-receive.d` directory. The way this works is Gitea first automatically runs a built-in `post-receive` hook, which is a script that iterates through all of the files inside the `post-receive.d` directory and executes them as well.
+
+Here is the script I use to trigger a build:
+
+```bash
+#!/bin/bash
+
+JENKINS_URL="https://build.uuard.com"
+JENKINS_JOB="/job/personal-website-pipeline/build"
+JENKINS_USER="nicholas"
+JENKINS_API_TOKEN="<api-token>"
+JENKINS_BUILD_URL="$JENKINS_URL$JENKINS_JOB"
+
+curl -X POST -u "$JENKINS_USER:$JENKINS_API_TOKEN" "$JENKINS_BUILD_URL"
+
+exit 0
+```
+
+When Jenkins receives the HTTP POST request at `https://build.uuard.com/job/personal-website-pipeline/build` with valid authentication it will initiate the build.
+
+Done.
\ No newline at end of file
diff --git a/container/site/content/posts/jenkins/index.md b/container/site/content/posts/jenkins/index.md
new file mode 100644
index 0000000..84055c6
--- /dev/null
+++ b/container/site/content/posts/jenkins/index.md
@@ -0,0 +1,198 @@
++++
+categories = ["software"]
+tags = ["automation","docker","jenkins"]
+date = 2024-10-31T15:49:57Z
+description = ""
+draft = false
+slug = "jenkins"
+title = "🐋 Configuring Development Pipeline with Jenkins & Docker"
+author = "nicholas"
++++
+
+I have a few Gitea git repositories that I host on my local network. Eventually I would like to be able to configure my server to automatically build and deploy the latest changes to these repositories to a development site. In this post, I will configure only the infrastructure that will make this possible.
+
+
+# First Steps
+The first thing I do with any project that runs in a container is to give it its own directory. I create the Docker Compose configuration file that will describe the docker container.
+
+```shell
+nicholas@nas:/$ cd /hdd1/nicholas/docker/dockerfiles/
+nicholas@nas:/.../$ mkdir jenkins && cd jenkins
+nicholas@nas:/.../jenkins/$ nano docker-compose.yml
+```
+
+```yaml
+services:
+  jenkins:
+    image: jenkins/jenkins:jdk17
+    container_name: jenkins
+    hostname: jenkins
+    restart: always
+    volumes:
+      - ./data:/var/jenkins_home/
+    ports:
+      - "2376:2376"
+      - "8882:8080"
+      - "50000:50000"
+```
+
+## Explanation
+ * `restart: always`: Configures the container to always restart automatically if it stops unexpectedly. This keeps Jenkins running persistently.
+ * `volumes`: Mounts folders on my host to a folder inside the container:
+   * `./data:/var/jenkins_home/`: Maps the local data folder to `/var/jenkins_home/` inside the container for data persistence across restarts (Jenkins stores all its configuration, plugins, and job data in `/var/jenkins_home`)
+ * `ports`: Maps ports on the host to ports inside the container:
+   * `2376:2376`: This port is typically used by Docker daemons for secure Docker client connections.
+   * `8882:8080`: Maps port 8080 inside the container (Jenkins’ web UI port) to port 8882 on the host. I access Jenkins at `http://host:8882`.
+   * `50000:50000`: Maps the Jenkins agent communication port (50000) for connecting with Jenkins agents.
+
+### Create a data folder for Jenkins to use as a bind mount
+
+```sh
+ mkdir data
+```
+### Start the container
+
+```shell
+sudo docker compose up -d
+```
+
+This will start the container. Now I can access it at `http://nas:8882`, but in a few steps I have not described in this post, I have configured my nginx reverse proxy to forward requests at `https://build.uuard.com` to the underlying docker container at `http://nas:8882`. I can use these two addresses interchangeably – they point to the same container. Before I can do any more configuration, I need to complete the Getting Started section of the web UI, which is mostly is self-explanatory.
+
+
+
+In my compose file, I mapped the host directory `./data` to the container directory `/var/jenkins_home`. Therefore, I am able to read the password at `./data/secrets/initialAdminPassword`
+
+```shell
+cd data/secrets && cat initialAdminPassword
+7ca8db936d794e78a70df88a1b9c2c1h
+```
+
+### Finishing Initial Setup
+I selected 'Install suggested plugins'. I am only trying to get something working quickly, not optimizing. This step shows a very cool dashboard of the installation progress.
+
+{{< video
+  src="videos/setup.webm"
+  width="100%"
+>}}
+
+### Installing Gitea Plugin
+Since I am hosting my own version control software Gitea, as opposed to, for example, GitHub or GitLab, I will need to install and configure the Jenkins Gitea plugin, which is not installed by default via the 'Install suggested plugins' option that I selected in the step above. This does not complicate things much at all. The video below shows the simple installation process, and further down I show the configuration related to the Gitea plugin.
+
+{{< video
+  src="videos/jenkins_install_gitea_plugin.webm"
+  width="100%"
+>}}
+
+### Configuring Gitea Service Account
+The next step is to create a service account that Jenkins can use to make requests to Gitea API. I could use my personal Gitea account to create the token, which would simplify things somewhat, but this does not accord with best practices. This will make the setup more robust and extensible. The service user will belong to the same organization as the owner of the repository and will therefore have the same ability to read and write to the repository. I name the account *service_account*. I do not describe this step in any more detail.
+
+
+### Generating an Access Token
+I sign in to the service account and generate an access token with only the minimum permissions necessary. I need to copy this access token and preserve it for use in the next step. The video below shows the process of creating an access token.
+
+{{< video
+  src="videos/gitea_generate_token.webm"
+  width="100%"
+>}}
+
+### Add Gitea Credentials to Jenkins
+I use the access token string generated in the step above to create a credential within Jenkins. This credential will be used in the next step. The video below shows the process of creating the gitea credential in Jenkins.
+
+{{< video
+  src="videos/jenkins_add_gitea_credential.webm"
+  width="100%"
+>}}
+
+### Configure Jenkins Pipeline
+I create a new Jenkins Item (Pipeline). The configuration options below instruct Jenkins to fetch the pipeline definition (the Jenkinsfile) from a source control management (SCM) system – in this case Gitea. Jenkins will look for a Jenkinsfile in the specified repository build_test.git and branch main. The build trigger for this pipeline is a post-commit hook. After each commit, a script runs that sends a request to Jenkins, which triggers it to check out the latest commit from the specified branch, and execute build steps according to the Jenkinsfile.
+
+{{< video
+  src="videos/jenkins_configure_pipeline.webm"
+  width="100%"
+>}}
+
+ * Under ⚙️Build Triggers
+   * Check the box ☑️ Poll SCM – leave poll schedule textarea empty
+     * No schedules so will only run due to SCM changes if triggered by a post-commit hook
+ * Under 〰️Pipeline
+   * Select Pipeline script from SCM
+     * Select Git SCM
+       * Enter Repository URL "https://git.uuard.com/build_test.git"
+       * Select the Gitea credential created in the step above: "gitea"
+       * Enter Branch Specifier "main"
+       * Script path "Jenkinsfile"
+
+### Jenkinsfile / Pipeline Definition
+The pipeline definition only has one stage, which I have named Checkout, which uses Jenkins' built-in command checkout to checkout a git repository defined in the scm variable. The scm variable contains the git SCM configuration that was defined in the Jenkins Pipeline Item above. The Jenkinsfile below resides in the git repository root directory.
+
+```
+pipeline {
+    agent any
+    stages {
+        stage('Checkout') {
+            steps {
+                checkout scm
+            }
+        }
+    }
+    post {
+        failure {
+            echo "Build Failed"
+        }
+    }
+}
+```
+The video below shows the process of pushing a commit to the repository, the git webhook being sent to Jenkins (invisibly, in the background) and Jenkins receiving the request and executing actions defined in the pipeline Jenkinsfile
+
+{{< video
+  src="videos/jenkins_trigger_build.webm"
+  width="100%"
+>}}
+
+### Creating Build Agent / Jenkins Node
+The next step is to create a dedicated build agent that will execute the steps outlined in a build pipeline. I name the node build_test_agent. I select Launch agent by connecting it to the controller. This option is selected because I intend to use a separate docker container to run an inbound Jenkins agent. My Jenkins setup will operate under the master-controller/agent-slave pattern where the master or controller server (My docker container running docker image `jenkins/jenkins:jdk17`) manages the scheduling of jobs, while the agents or slaves (docker container(s) running the docker image jenkins/inbound-agent) execute the jobs as directed by the master/controller. The secret and the name generated after the agent is created will be used to create the build agent in the step below. The video below shows the process of creating such a build agent.
+
+{{< video
+  src="videos/jenkins_create_build_agent.webm"
+  width="100%"
+>}}
+
+### Configure Build Agent
+
+Once again, I need to create another directory for a Docker Compose definition.
+```shell
+    nicholas@nas:/$ cd /hdd1/nicholas/docker/dockerfiles/
+    nicholas@nas:/.../$ mkdir jenkins_agent && cd jenkins_agent
+    nicholas@nas:/.../jenkins/$ nano docker-compose.yml
+   ```
+
+### Create docker-compose.yml File
+```yaml
+services:
+  jenkins-agent:
+    container_name: jenkins-agent
+    hostname: jenkins-agent
+    image: jenkins/inbound-agent
+    init: true
+    command: ["-url", "https://build.uuard.com", "${AGENT_SECRET}", "${AGENT_NAME}"]
+    restart: always
+```
+The `.env` file holds the `AGENT_SECRET` and `AGENT_NAME` environment variables which I reference in the command passed to the Jenkins agent container.
+
+```
+AGENT_SECRET=9dc1911f3a151cb37227dcc05467053511b5892e717bf1029add503ae2ffc66b
+AGENT_NAME=build_test_agent
+```
+
+### Start Build Agent
+```shell
+    sudo docker compose up -d
+```
+This starts the container. The video below shows the process of starting the agent container. Notice the build_test_agent status changes from (offline) to Connected. This agent is now available to do work directed by the Jenkins controller.
+
+{{< video
+  src="videos/jenkins_start_build_agent.webm"
+  width="100%"
+>}}
+
+Done! This will give me a foundation on which to build out a development pipeline for any number of my software projects.
\ No newline at end of file
diff --git a/container/site/content/posts/key-west/index.md b/container/site/content/posts/key-west/index.md
new file mode 100644
index 0000000..3eb040c
--- /dev/null
+++ b/container/site/content/posts/key-west/index.md
@@ -0,0 +1,13 @@
++++
+categories = ["travel"]
+date = 2025-01-13T20:27:44Z
+description = ""
+draft = false
+slug = "key-west"
+title = "🏝️ Key West, FL"
+author = "nicholas"
++++
+
+We had our honeymoon in Key West 2025-01-13 - 2025-01-17. I did not take many photos.
+
+{{< gallerynew name="key-west-gallery" >}}
diff --git a/container/site/content/posts/key-west/key-west-gallery.yaml b/container/site/content/posts/key-west/key-west-gallery.yaml
new file mode 100644
index 0000000..149b4fa
--- /dev/null
+++ b/container/site/content/posts/key-west/key-west-gallery.yaml
@@ -0,0 +1,100 @@
+images:
+  - src: "images/airplane-window-sunset.JPEG"
+    alt: "View out of window of an airplane during sunset"
+    caption: "Sunset on the way back"
+  - src: "images/beach.JPEG"
+    alt: "A beach"
+    caption: "Beach"
+  - src: "images/bus-to-bahia-honda.jpg"
+    alt: "Looking out the window on a bus"
+    caption: "Rainy bus to Bahia Honda."
+  - src: "images/celebrity-silhouette-closeup.JPG"
+    alt: "Cruise ship"
+    caption: "Celebrity Crusie ship"
+  - src: "images/celebrity-silhouette-distant.JPG"
+    alt: "A very large cruise ship"
+    caption: "A very large cruise ship"
+  - src: "images/coco-plum-inn-pool.JPEG"
+    alt: "Guests swimming in the outdoor pool at the Coco Plum Inn."
+    caption: "Relaxing by the pool at the Coco Plum Inn."
+  - src: "images/coco-plum-inn-pool.jpg"
+    alt: "Guests relaxing and swimming in the outdoor pool at the Coco Plum Inn."
+    caption: "Enjoying a refreshing dip at the Coco Plum Inn pool."
+  - src: "images/columbia-left-behind.JPEG"
+    alt: "A decaying ship, the USS Columbia, left abandoned in a harbor."
+    caption: "The poignant reminder of the USS Columbia."
+  - src: "images/dead-fish.JPEG"
+    alt: "A dead fish floating on a dark, reflective surface."
+    caption: "A stark image of a decaying fish."
+  - src: "images/dry-tortugas-birds.JPEG"
+    alt: "Seabirds soaring over the Dry Tortugas National Park."
+    caption: "Diverse seabirds inhabiting the Dry Tortugas."
+  - src: "images/dry-tortugas-fort-ocean.JPEG"
+    alt: "The historic Fort Jefferson overlooking the ocean in the Dry Tortugas."
+    caption: "Exploring the historic Fort Jefferson."
+  - src: "images/dry-tortugas-fort-water.JPEG"
+    alt: "The interior of Fort Jefferson, reflecting the sunlight through the windows."
+    caption: "Inside the impressive walls of Fort Jefferson."
+  - src: "images/dry-tortugas-seaplanes.JPEG"
+    alt: "Seaplanes taking off and landing at the Dry Tortugas Airport."
+    caption: "A scenic view of seaplanes in the Dry Tortugas."
+  - src: "images/fort-iguana-encounter.JPEG"
+    alt: "A close-up photograph of a green iguana basking in the sun."
+    caption: "A vibrant green iguana at Fort Iguana."
+  - src: "images/full-moon-palm-tree.JPEG"
+    alt: "A palm tree silhouetted against a full moon in a tropical setting."
+    caption: "The beauty of a full moon over a palm tree."
+  - src: "images/hemmingway-house-cat.JPEG"
+    alt: "A tabby cat sitting on a porch of Ernest Hemingway's house."
+    caption: "A resident feline at Hemingway's house."
+  - src: "images/iguana-closeup.JPG"
+    alt: "A detailed close-up shot of a green iguana's face."
+    caption: "A fascinating close-up of an iguana."
+  - src: "images/iguana-mouth-open.JPG"
+    alt: "A green iguana with its mouth open, possibly feeding."
+    caption: "An iguana with an open mouth."
+  - src: "images/kc-weather.PNG"
+    alt: "A weather map showing rain in the Miami area."
+    caption: "A weather map indicating rainfall."
+  - src: "images/key-west-airport-tarmac.jpg"
+    alt: "Aircraft parked on the tarmac at Miami International Airport."
+    caption: "Aircraft at Miami International Airport."
+  - src: "images/key-west-seaport.jpg"
+    alt: "The bustling Key West seaport with ships and boats."
+    caption: "The vibrant Key West seaport."
+  - src: "images/key-west-weather.PNG"
+    alt: "A weather map showing sunny conditions in Key West."
+    caption: "A weather map displaying clear skies in Key West."
+  - src: "images/lighthouse-window.jpg"
+    alt: "The window of a lighthouse with a blurry sea view."
+    caption: "Looking out from the window of a lighthouse."
+  - src: "images/manatee-closeup.JPG"
+    alt: "A close-up photograph of a manatee swimming."
+    caption: "A gentle giant – a manatee."
+  - src: "images/portuguese-man-o-war.jpg"
+    alt: "The wreck of the Portuguese Man-of-War ship, a historic maritime site."
+    caption: "The preserved wreck of the Portuguese Man-of-War."
+  - src: "images/seaplane.JPEG"
+    alt: "A vintage seaplane landing on the water."
+    caption: "A classic seaplane taking off."
+  - src: "images/seaside-cafe-lobster-pizza.jpg"
+    alt: "A delicious-looking lobster pizza served at a seaside cafe."
+    caption: "Enjoying a seafood pizza by the ocean."
+  - src: "images/small-iguana.JPEG"
+    alt: "A small green iguana in a tropical environment."
+    caption: "A tiny iguana in a lush setting."
+  - src: "images/sunset-mallory-square.JPEG"
+    alt: "The iconic Mallory Square in Key West during sunset."
+    caption: "The colorful Mallory Square in Key West."
+  - src: "images/sunset-mallory-square.jpg"
+    alt: "The colorful Mallory Square in Key West at sunset."
+    caption: "A stunning sunset view of Mallory Square."
+  - src: "images/yankee-freedom-aft-deck.JPEG"
+    alt: "Guests relaxing on the aft deck of the cruise ship Yankee Freedom."
+    caption: "Relaxing on the deck of the Yankee Freedom."
+  - src: "images/yankee-freedom-docked.JPEG"
+    alt: "The cruise ship Yankee Freedom docked in Key West Harbor."
+    caption: "The Yankee Freedom docked in Key West."
+  - src: "images/yankee-freedom.JPEG"
+    alt: "The cruise ship Yankee Freedom sailing through the turquoise waters."
+    caption: "The Yankee Freedom sailing through the Caribbean."
\ No newline at end of file
diff --git a/container/site/content/posts/local-llm-setup/index.md b/container/site/content/posts/local-llm-setup/index.md
new file mode 100644
index 0000000..ca9bfea
--- /dev/null
+++ b/container/site/content/posts/local-llm-setup/index.md
@@ -0,0 +1,111 @@
++++
+categories = ["software","technology"]
+tags = ["llm","docker"]
+date = 2025-03-12T10:54:00-06:00
+description = ""
+draft = false
+slug = "local-llm-basic-setup"
+title = "🦙 Self-hosting LLM with Ollama & OpenWebUI"
+author = "nicholas"
++++
+
+I impulsively purchased a NVIDIA RTX 4060 at my local Best Buy. I thought it would be fun to run my own LLMs.In this post, I deploy only a minimal local LLM with web UI.
+
+## LLMs
+LLMs continue to improve apace, getting smaller, more efficient, smarter, generally better in every way, every day, relentlessly and with such speed that I really cannot even pretend to have kept up with their developments to any meaningful degree. I merely absorb the general *sense of things*, passively, allowing the vibes of the techno-accelerationist-sphere wash over me. Every week a new set of capabilities are launched with a new version of a new model using a new paradigm. Exciting, truly what a time to be alive. Around the time of this writing, Deepseek released its R1 model which one can run on relatively low-spec hardware (this is true of many earlier models by other organizations, but none produced the same frenzied excitement as this one), so I hopped on the hype wagon and now I have a somewhat powerful reasoning model running on my computer. Running my own LLM locally is just for fun, and as of the time I write this confers no "practical" benefit to me to over using ChatGPT or Deepseek over the web.
+
+## Docker Machine
+Typically I run all of my containers on my "server" machine. I have a few related posts about this: [Server build pt. I](), [Server build pt. II](). However, running LLMs locally will require more powerful hardware than my server machine contains. Luckily my [other machine]() does contain powerful enough components, so I can easily run some smaller LLMs e.g. quantized and distilled models.
+
+
+I wrote a Docker Compose file that defines a service for running Ollama container, with support for GPU acceleration:
+### Docker Compose File
+```yaml {filename="compose.yml"}
+services:
+  ollama:
+    container_name: ollama
+    image: ollama/ollama
+    expose:
+     - 11434/tcp
+    ports:
+     - 11434:11434/tcp
+    deploy:
+      resources:
+        reservations:
+          devices:
+          - driver: nvidia
+            capabilities: ["gpu"]
+            count: all
+    volumes:
+      - ollama:/root/.ollama
+    restart: unless-stopped
+
+volumes:
+  ollama:
+```
+### Running the Container
+To run the container, I simply:
+```shell
+docker compose up -d
+```
+This will start the container in headless mode.
+
+### Interacting with LLM - CLI
+{{< image 
+    src="images/ollama-docker-desktop.JPG" 
+    caption="Docker Desktop running Ollama" >}}
+
+Now I can access the model via CLI. I happen to be using Docker Desktop on Windows, which allows me to access the container's shell via the UI. Here I can download different models and interact with them using the CLI. I demonstrate a few commands in the image, `ollama --version` to get the Ollama version, `ollama list` returns a list of the models installed (I already installed a few models to test). I can run a specific model with `ollama run <model name>` or `ollama run <model id>`. It works, incredible!
+
+However, this is a poor way to interact with an LLM, and I can do better by running a web UI that will connect to Ollama API backend.
+
+## OpenWebUI
+{{< image 
+    src="OpenWebUI" 
+    caption="images/openwebui.jpg" >}}
+
+OpenWebUI is a web interface which I can use to interact with and manage my local models. I will also be running this in Docker. 
+
+### Docker Compose File
+Here is the Docker compose file I used to run OpenWebUI:
+```yaml
+services:
+  openwebui:
+    restart: unless-stopped
+    image: ghcr.io/open-webui/open-webui:cuda
+    #network_mode: host
+    ports:
+      - "3000:8080"
+    volumes:
+      - ./data:/app/backend/data
+    deploy:
+      resources:
+        reservations:
+          devices:
+            - driver: nvidia
+              count: all
+              capabilities: [gpu]
+```
+### Ollama API Connection
+Since I am running Ollama on port 1134 on the same machine, I configure the Ollama API connection to point to local machine:
+{{< image 
+    src="images/ollama-openwebui.JPG" 
+    caption="OpenWebUI ↔ Ollama Connection" >}}
+
+## GPU Usage
+This screenshot shows that the model is indeed using my GPU to do all manner of linear algebra operations, etc., which eventually results in it generating some output text.
+
+{{< image 
+    src="images/deepseek-r1-7b-GPU-usage.jpg" 
+    caption="GPU Usage - Deepseek r1:7b" >}}
+
+## Realtime Usage
+{{< video
+  src="videos/deepseek-r1-7b-GPU.mp4"
+  width="100%"
+  autoplay=true
+  loop=true
+>}}
+
+## Potential Uses
+I can integrate locally-hosted LLM APIs with new software projects. Who knows.
\ No newline at end of file
diff --git a/container/site/content/posts/meat-emulsions/index.md b/container/site/content/posts/meat-emulsions/index.md
new file mode 100644
index 0000000..85b6652
--- /dev/null
+++ b/container/site/content/posts/meat-emulsions/index.md
@@ -0,0 +1,63 @@
++++
+categories = ["food"]
+date = 2024-07-13T18:16:10Z
+description = ""
+draft = false
+slug = "meat-emulsions"
+title = "🥩 Meat Emulsions - Gyros & Cheesesteaks"
+author = "nicholas"
++++
+
+A meat emulsion is just a mixture of ground meat (in my case, mostly beef and lamb) combined with ice water, fat, and other mystery ingredients which I cover later, which form a homogeneous "emulsified" mixture. These are the same properties of many processed meat products like sausage, hot dogs, and salami. Technically, or in other contexts, an emulsion describes a stable mixture of two liquids that normally do not mix. Whether the meat mixtures I describe above ought to be considered emulsions is apparently controversial but I am not interested in this trivia. I will refer to the mixture as an emulsion.
+  
+## Why would I do such a thing?
+ * **I like it**
+   * This is perhaps the biggest and definitely the best reason to emulsify meats. It is bothersome to attempt to put to words where the satisfaction comes from, or why, so I will not do it. I simply find the process and results enjoyable.
+ * **No Local Source**
+   * I would happily buy if I could find it locally and the price was right.
+ * **Cost**
+   * The second best answer is the eye popping results of the cost calculations, for arguably a superior product. It is costlier by a factor of, according to my roughest calculations, something like 3 to produce an "equivalent" product to Philly steak (thinly sliced cuts of top round or rib-eye – ~8 and ~15 USD / lb., respectively).
+ * **Uniformity of Taste & Texture**
+   * The even distribution of seasonings, spices, fats, salts, and sugar throughout the meat mixture create unbeatable texture and flavor. Binders such as bread crumbs and milk powder help create a tender, fatty, juicy, smooth, rich piece of meat that nature alone could not hope to replicate in animal muscle.
+ * **Handling, Storage & Other Conveniences**
+   * I form the meat into cylinders (pressing into a 32 oz. deli container) and freeze them. Freezing gives them a functionally infinite shelf life. To prepare the meat, I need only slightly thaw the surface of the meat for ~5 minutes (freezer is ~14 F) before I am able to effortlessly slice off thin vertical strips. Afterward, the cylinder goes straight back into the freezer, completing the process which can safely be repeated infinitely. I pan fry or broil them for crispy edges and caramelized crusts.
+
+## Resources
+*Home Production of Quality Meats and Sausages* – this book was a useful reference for typical usage amounts for various seasonings, spices, and other additions.
+
+{{< image 
+    src="images/home-production-of-quality-meats-and-sausages.jpg" 
+    caption="Home Production of Quality Meats and Sausages" >}}
+
+## The Process
+The process for any kind of gyro-like meat is the same.
+ * Weigh out portion of meat
+ * Using a food processor, shred enough ice for the recipe
+ * Weigh and freeze the fat of choice (pork, beef, vegetable shortening, etc)
+ * Weigh out specified amount of water ice and reserve in freezer
+ * Mix together salt and dry seasonings
+ * Add mixture to meat and mix thoroughly, by hand
+ * Chill meat for 1 hr.
+ * Add the meat to a food processor
+ * Add bits of frozen fat to mixer
+ * Mix
+ * Periodically add shaved ice as the temperature climbs no higher than ~50 F
+
+## Results
+
+### Gyro Meat
+This is my favorite.
+{{< image 
+    src="images/meat-cone-deli-container.JPG" 
+    caption="Meat cylinder in deli container" >}}
+{{< image 
+    src="images/meat-cone.JPG" 
+    caption="Meat cone on cutting board" >}}
+{{< image 
+    src="images/gyro-meat-raw.JPG" 
+    caption="Uncooked gyro meat strips" >}}
+{{< image 
+    src="images/gyro-meat-cooked.JPG" 
+    caption="Cooked gyro meat strips" >}}
+
+### "Philly" Cheese steak
diff --git a/container/site/content/posts/mixed-berry-muffin/index.md b/container/site/content/posts/mixed-berry-muffin/index.md
new file mode 100644
index 0000000..5d99b0d
--- /dev/null
+++ b/container/site/content/posts/mixed-berry-muffin/index.md
@@ -0,0 +1,18 @@
++++
+categories = ["food"]
+date = 2025-02-22T13:40:00-06:00
+description = ""
+draft = false
+slug = "mixed-berry-muffins"
+title = "🫐 Mixed Berry Muffins"
+author = "nicholas"
++++
+
+Bailey made muffins. We only have one egg left. The recipe calls for two eggs, one egg was substituted with a combination of baking powder, water, and oil. I don't know what ratio she used, but it is a quick and dirty substitute. It will not matter.
+
+{{< video
+  src="videos/timelapse-bake-mixed-berry-muffins.webm"
+  width="100%" >}}
+
+{{< gallerynew name="mixed-berry-muffin-gallery">}}
+
diff --git a/container/site/content/posts/mixed-berry-muffin/mixed-berry-muffin-gallery.yaml b/container/site/content/posts/mixed-berry-muffin/mixed-berry-muffin-gallery.yaml
new file mode 100644
index 0000000..9f8ee61
--- /dev/null
+++ b/container/site/content/posts/mixed-berry-muffin/mixed-berry-muffin-gallery.yaml
@@ -0,0 +1,46 @@
+images:
+  - src: "images/add-berries.JPG"
+    alt: "Adding berries to a bowl"
+    caption: "Adding berries"
+  - src: "images/add-salt.JPG"
+    alt: "Adding salt to mixture"
+    caption: "Adding salt"
+  - src: "images/cream-fat.JPG"
+    alt: "Creaming fat in a bowl"
+    caption: "Creaming fat"
+  - src: "images/fill-tins.JPG"
+    alt: "Filling muffin tins"
+    caption: "Filling tins"
+  - src: "images/measure-egg.JPG"
+    alt: "Measuring an egg"
+    caption: "Measuring egg"
+  - src: "images/measure-flour.JPG"
+    alt: "Measuring flour"
+    caption: "Measuring flour"
+  - src: "images/measure-milk.JPG"
+    alt: "Measuring milk"
+    caption: "Measuring milk"
+  - src: "images/mix-dry-1.JPG"
+    alt: "Mixing dry ingredients"
+    caption: "Mixing dry ingredients"
+  - src: "images/mix-dry-2.JPG"
+    alt: "Stirring dry ingredients"
+    caption: "Stirring dry mix"
+  - src: "images/mix-in-berries.JPG"
+    alt: "Mixing in berries"
+    caption: "Mixing in berries"
+  - src: "images/muffin-baked.JPG"
+    alt: "Baked muffin on a surface"
+    caption: "Muffin baked"
+  - src: "images/muffin-extract-1.JPG"
+    alt: "Removing muffin from tin"
+    caption: "Taking muffin out"
+  - src: "images/muffin-extract.JPG"
+    alt: "Extracting muffin from pan"
+    caption: "Removing muffin"
+  - src: "images/muffin-in-tin.JPG"
+    alt: "Muffin in baking tin"
+    caption: "Muffin in tin"
+  - src: "images/muffins-drying-rack.JPG"
+    alt: "Muffins cooling on a rack"
+    caption: "Muffins on rack"
diff --git a/container/site/content/posts/mod-pizza-crust/index.md b/container/site/content/posts/mod-pizza-crust/index.md
new file mode 100644
index 0000000..ecce36e
--- /dev/null
+++ b/container/site/content/posts/mod-pizza-crust/index.md
@@ -0,0 +1,113 @@
++++
+categories = ["food"]
+tags = ["reverse-engineer","MOD"]
+date = 2024-07-19T15:27:08Z
+description = ""
+draft = false
+slug = "mod-pizza-cust"
+title = "🍕 MOD Pizza Crust"
+author = "nicholas"
++++
+
+ Once again, I document my attempt to replicate a delicious food item, equipped with a few sample pizzas, a spreadsheet, guesswork, and a few iterations. The target is the original thin crust pizza from MOD, a made-on-demand fast-casual food chain. Imagine Subway, except pizza. It is not important to know details of the business, except that on occasion it births from its ovens some of the most delightful pizza crust one can conceive. 
+ 
+ This is a baking operation, not a cooking one. It is very much about the crust. The objective is to create a crust that is crispy and light. This is different than crunchy. I do not want the crust to be crunchy. I do not want the pizza to be dense. It needs to be thin and strong and crispy and light. With the methods and recipe described in this post I am able to consistently achieve each of the desirable characteristics described here.
+
+## Nutrition
+The first place to start is the nutrition information for the food product. The MOD website provides nutrition info for the 11" thin crust. The reflow after I resize the viewport gives me this unfortunate little ugly table. It has what I want though.
+
+{{< image 
+    src="images/mod_nutrition_table.PNG" 
+    caption="MOD nutrition table" >}}
+
+## Ingredients
+Also supplied by the website is the ingredient list. These ingredients are very standard and contain no surprises. It is not exciting whatsoever, which leads me to believe the magic of the crust is not at all in the ingredients, but in the preparation.
+
+{{< image 
+    src="images/mod_ingredient_list.PNG" 
+    caption="MOD ingredient list" >}}
+
+## Recipe Development
+Below I outline the process of reverse-engineering the recipe by identifying the components of interest and extracting from the two tables of data some useful numbers with which to concoct a formula.
+ * Fat
+   * Right away we know exactly how much extra virgin olive oil we will use in the formula.
+   * evoo is the only ingredient that appreciably contributes to the total fat. It is straightforward that there will be 6g of evoo per dough ball.
+ * Salt
+   * Similarly, but with additional wrinkle, we know the salt amount.
+   * The amount of sodium (not salt, per se) can used to calculate the amount of salt, using the following formula:
+   * (1310/1000)*2.54 = salt (g)
+ * Flour
+   * Once again, since we are given values for carbohydrates, and flour is composed of a known portion of carbohydrates (76% by weight), we can calculate the weight of flour by:
+   * 88 / 0.76 = flour (g)
+ * Water
+   * I am not given anything about the water. The water content will need to be relatively low. This results in a dryer and therefore crispier crust.
+   * I use ~50% water.
+ * Yeast
+   * The yeast content will depend on how I choose to prepare the dough. For example, if I want to cold ferment the dough for several days, which I do, I would use much less than if I wanted to ferment the dough only an hour.
+   * I write this recipe to include instructions to cold-ferment dough balls for two to three days as it resulted in a crust with the most tiny little bubbles, which I have convinced myself quite unscientifically must be a sign of a crispier crust. Really though, the tiny bubbles look good to me.
+   * Long fermentation times provide much time flexibility.
+  
+{{< image 
+    src="images/pizza-baking.JPG" 
+    caption="Pizza baking" >}}
+
+{{< video
+  src="videos/pizza-assembly.mp4"
+  width="100%"
+  autoplay=true
+  loop=true
+>}}
+
+
+This table reflects the calculations and reasoning described above.
+
+| Ingredient | Amount (g) |
+| ---------- | ---------- |
+| flour      | 116.00     |
+| fat        | 6.00       |
+| salt       | 3.30       |
+| water      | 58.00      |
+| yeast      | 0.60       |
+
+## Recipe
+While the recipe is indeed derived from the information above, it is certainly not the exact same one. Nor are the methods the same – MOD uses methods and equipment not available to me, such as a heated dough press that compresses and form the dough into a neat round disc, all while preserving air pockets. When heated, these air pockets will expand with hot vapor and eventually form a light and airy crust, even under the immense wet weight of my long list of toppings. Rolling out the dough by any other means is destructive to these air pockets and make for a less-crispy crust. Also available to MOD is a specially designed oven that reaches temperatures beyond 550 degrees F, and a cooking surface whose conductive properties are more finely tuned for such a pizza. My baking steel is highly conductive! Therefore, the goal is not necessarily to replicate the product through their processes and equipment, but instead to replicate the end product however it is possible.
+
+### Formulation
+| Ingredient          | Baker's %   |
+| ------------------- | ----------- |
+| Flour, 11.6%        | 100.00%     |
+| Water               | 50.00%      |
+| Yeast, Instant, Dry | 0.50%       |
+| Salt                | 2.75%       |
+| Oil                 | 5.00%       |
+| Sugar               | 1.00%       |
+| **TOTAL**           | **159.25%** |
+
+### Process
+1. **Mix** the ingredients.
+2. **Shape** the dough into balls.
+3. **Cold ferment** the dough for **24–72 hours**.
+4. **Roll out** each dough ball to **11 inches** in diameter.
+5. **Preheat** the baking steel for **45 minutes** at **500°F**.
+6. **Lower** the oven temperature to **450°F**.
+7. **Bake** for **11 minutes**.
+8. **Transfer** the baked items to a cooling rack and cool for **5 minutes**.
+
+
+## Results
+Here are the results from a couple of pizzas I made using the dough recipe.
+
+{{< image 
+    src="images/supreme-pizza.jpg" 
+    caption="Supreme pizza" >}}
+
+{{< image 
+    src="images/crust-underside.JPG" 
+    caption="Crust leopard spotting" >}}
+
+I have succeeded in producing a crispy, light, thin and strong crust.
+
+## Variation
+To make an even crispier crust, I dried out the bottom of the crust. The dough is rolled out, inverted, dried overnight, flipped, topped, and finally baked.
+
+Done.
\ No newline at end of file
diff --git a/container/site/content/posts/mssql-db-config/index.md b/container/site/content/posts/mssql-db-config/index.md
new file mode 100644
index 0000000..969df11
--- /dev/null
+++ b/container/site/content/posts/mssql-db-config/index.md
@@ -0,0 +1,176 @@
++++
+categories = ["software"]
+tags = ["mssql"]
+date = 2024-10-01T14:20:28Z
+description = ""
+draft = false
+slug = "mssql-db-config"
+title = "💽 Configuring Microsoft SQL Server Database"
++++
+
+I am using Microsoft's Blazor framework to create a Webassembly app that manages my recipes. I began building this web app using an in-memory database, which means the data does not persist after the program stops running. Each time I build, the app rebuilds the database with brand new data. This is annoying and unnecessary now that the general structure of the database has been established. I will transition the app to instead use a database on an on-premise server.
+
+## Docker
+As with nearly every other service I host, I will run an instance of SQL Server in a Docker container. Microsoft provides a shell command that will get an instance of Linux-based SQL Server running.
+
+```shell
+    docker run -e "ACCEPT_EULA=Y" -e "MSSQL_SA_PASSWORD" \
+   -p 1433:1433 --name sql1 --hostname sql1 \
+   -d \
+   mcr.microsoft.com/mssql/server:2022-latest
+```
+
+I typically use Docker Compose to manage my services, so I will transform this command into a docker-compose.yml file. There are additional pieces of configuration missing here: timezone, product ID, and data persistence across container restarts. I add them in the final configuration file. Additionally, the System Administrator (user sa) password is stored in a .env file that lives in the root directory of the host.
+
+
+```shell
+nicholas@nas:/$ cd /hdd1/nicholas/docker/dockerfiles/
+nicholas@nas:/hdd1/nicholas/docker/dockerfiles/$ mkdir mssql && cd mssql
+nicholas@nas:/hdd1/nicholas/docker/dockerfiles/$ nano docker-compose.yml
+```  
+
+```yaml
+    services:
+    mssql:
+        image: mcr.microsoft.com/mssql/server:2022-latest
+        container_name: mssql
+        hostname: mssql
+        environment:
+        - ACCEPT_EULA=Y
+        - MSSQL_SA_PASSWORD=${MSSQL_SA_PASSWORD}
+        - TZ=America/Chicago
+        restart: always
+        volumes:
+        - ./data:/var/opt/mssql/data
+        - ./logs:/var/opt/mssql/log
+        - ./secrets:/var/opt/mssql/secrets
+        ports:
+        - "1433:1433"
+```
+The container runs as user mssql, so I will need to give my container directory permissions to this user.
+
+  ```shell
+    sudo chown -R 10001:10001 ./mssql/
+    sudo chmod -R 755 ./mssql/
+ ```
+
+Next I start the container.
+
+  ```shell
+    sudo docker compose up -d
+[+] Running 2/4
+⠙ mssql [⣿⡀⣿] 168.3MB / 578.3MB Pulling 11.2s
+✔ 3d29464607d8 Pull complete 5.9s
+⠙ b14d3f02d050 Downloading [======> ]... 10.1s
+✔ c4ebe057087c Download complete 3.4sl
+   ```
+
+The server is ready to accept connections now.
+
+
+## Microsoft SQL Server Management Studio
+
+I will be using SSMS to connect to and configure the server.
+
+The server name is the host name of my server, which is nas. I already configured the login credentials in the docker-compose.yml and .env files.
+
+Here I create a database Formulation and the two tables: Ingredient and IngredientRelationship. Like I said, this could have been a spreadsheet.
+
+
+```sql
+CREATE DATABASE Formulation;
+
+USE Formulation;
+
+CREATE TABLE Ingredient (
+    Id UNIQUEIDENTIFIER PRIMARY KEY,
+    Name NVARCHAR(100) NOT NULL,
+    Calories FLOAT NOT NULL,
+    Protein FLOAT NOT NULL,
+    Fat FLOAT NOT NULL,
+    Carbohydrates FLOAT NOT NULL,
+    Fiber FLOAT NOT NULL,
+    Sugar FLOAT NOT NULL,
+    Sodium FLOAT NOT NULL
+);
+
+CREATE TABLE IngredientRelationship (
+    Id UNIQUEIDENTIFIER PRIMARY KEY,
+    ParentId UNIQUEIDENTIFIER NOT NULL,
+    ChildId UNIQUEIDENTIFIER NOT NULL,
+    Proportion FLOAT NOT NULL,
+    FOREIGN KEY (ParentId) REFERENCES Ingredient(Id),
+    FOREIGN KEY (ChildId) REFERENCES Ingredient(Id)
+);
+```
+   
+
+
+
+
+
+## Mapping Entity Classes to Database Tables with Entity Framework
+
+I am using Entity Framework in my web app, so I needed to define my database structure so that it mirrored the C# Entity Class I already defined. The Ingredient table in the database maps onto the C# Entity Class Ingredient.cs. The same is true for the IngredientRelationship table and IngredientRelationship.cs.
+
+  ```c#
+    namespace formulation.Common.Models
+{
+    [Table("Ingredient")]
+    public class Ingredient
+    {
+        [Key]
+        public Guid Id { get; set; }
+        [Required]
+        [StringLength(100, ErrorMessage = "Name cannot be longer than 100 characters.")]
+        public string Name { get; set; } = string.Empty;
+        public double Calories { get; set; } // in kcal
+        public double Protein { get; set; } // in grams
+        public double Fat { get; set; } // in grams
+        public double Carbohydrates { get; set; } // in grams
+        public double Fiber { get; set; } // in grams
+        public double Sugar { get; set; } // in grams
+        public double Sodium { get; set; } // in milligrams
+
+        public ICollection? Ingredients { get; set; }
+        public ICollection? ParentIngredients { get; set; }
+        public Ingredient()
+        {
+            Ingredients = new List();
+            ParentIngredients = new List();
+        }
+    }
+}
+   ```
+
+## Create SQL Server User for App Connection
+
+Now I need to create a dedicated SQL Server user for my app – one with only limited privileges. It is best practice to abide by the principle of least privilege, which states that a user should be granted the minimum level of access necessary to perform the required function. Therefore it is not recommended to use the sa user or any high-privilege accounts for an app connection.
+
+```sql  
+    CREATE LOGIN Formulation WITH PASSWORD = '';
+    USE Formulation;
+    CREATE USER Formulation FOR LOGIN Formulation;
+    EXEC sp_addrolemember 'db_datareader', 'Formulation'; -- Read permissions
+    EXEC sp_addrolemember 'db_datawriter', 'Formulation'; -- Write permissions
+```
+
+
+## Connection Strings & Secrets
+
+The next step is to configure a new Connected Service in Visual Studio. First I select the correct service dependency: SQL Server Database - On-premise
+
+Next I enter the login credentials User name, Password, Server name, Database name which were configured in the steps above. I click test connection to verify that this is working as expected. It is successful.
+
+Visual Studio automatically writes the connection string using this information. I save the connection strings in a local secrets file Secrets.json.
+
+
+## Using the App Connection User
+
+Finally I can reference this connection string in Program.cs to connect to the SQL Server.
+
+```c#
+builder.Services.AddDbContext(opt => opt.UseSqlServer(builder.Configuration.GetConnectionString("Formulation")));
+```
+
+Done.
\ No newline at end of file
diff --git a/container/site/content/posts/nas-build-pt-i/index.md b/container/site/content/posts/nas-build-pt-i/index.md
new file mode 100644
index 0000000..9bc708a
--- /dev/null
+++ b/container/site/content/posts/nas-build-pt-i/index.md
@@ -0,0 +1,157 @@
++++
+categories = ["technology","build"]
+date = 2021-09-09T14:53:39Z
+description = ""
+draft = false
+slug = "server-build"
+title = "💾 Server Build"
+author = "nicholas"
++++
+
+
+## Notes
+I am in possession of an increasingly large heap of data and I need a place to put it. I need a server that will run services that help serve and organize the files. Cloud storage/server solutions are too expensive for my purposes.
+
+
+{{< image 
+    src="images/nas-internals.jpg" 
+    caption="NAS internal components" >}}
+
+## Additional considerations in ascending order of plausibility / no real order.
+
+ * You use a USB stick to move files around and this process rapidly accelerates the rate at which your body experiences senescence.
+ * Your favorite cloud storage service kicked you off for abusing their unlimited plan.
+ * You cannot look yourself in the mirror lest you see a man in it you do not recognize, one that contrasts to the otherwise cool, confident and competent human being of 20 minutes ago, after you find yourself in a pinch forced to send files over Bluetooth in a last ditch effort to move one tiny, absolutely infuriatingly tiny but necessary configuration file to a device just inches away – a task so conceptually simple and obvious even your technologically mystified ancestors still laugh raucously at your impotence from the great beyond. You agonize over the tedium – again and again casting all the right spells, clicking all the right buttons, trying to stay calm to lower your dangerously spiking blood pressure. You avert your eyes in furious rebellion from the digital clock in the corner of the screen that seems to mock your focused efforts – you begin to regret the decision to allow the Windows task bar clock to display the seconds digits now – the ticking away a ceaseless reminder of your mortality and of your hopeless battle against God's will – to squeeze one moment of triumph – one small victory from your precious time on this Earth. You are Sisyphus, the file transfer your impossible burden. But what of your crime? What did you do to deserve this? No one and no thing will tell you and no error message reveals the nature of your failure. Not Sisyphus or Josef of The Trial, but some secret third, more hated thing. Your vision closes in around you try and you try and you will this cursed thing to be done! But the incantation is not quite right. You inflected where you should have introflected. Permissions issue. Firewalled. Timeout. DNS error. The transfer fails to your stuttering bewilderment and dismay in dozens of ways in the span of 12 minutes. In your fits of now blinding rage you are given no clues as to why – or rather – you cannot see the error messages, only that you have failed. You are resigned to accept your destiny, to forever struggle to move the file you have come to resent until the miser within you capitulates, finally releasing the funds necessary to buy your very own
+
+## Network Attached Storage
+The solution to my data storage and retrieval woes is a `NAS`, which is a file storage server attached to my local network. As long as a device has access to the network, so too shall I have access to the data.
+
+## Requirements
+ * 3.5" Drive Bay capacity of 6.
+   * Good things come in 3s and I will be mirroring each drive. Therefore 6.
+ * Multi-core processor
+   * Integrated GPU.
+   * Low cooling requirements.
+   * Low idle power consumption (>~10w).
+ * 2.5G Intel NIC.
+ * Enough RAM and room for expansion
+ * Inexpensive
+ * Parts widely available
+
+## Build or Buy
+The first consideration is buying versus building. The distinction will probably be difficult to pin down since arguably even the machines I refer to as "pre-built" require some hardware installation and software configuration. But for the purposes here, the distinction between these two will be found mostly in the form and features of the machine. Where a pre-built dedicated NAS is typically an elegant yet stout, low profile bank of hard drives equipped with hot-swappable bays (I speak only of the non-enterprise, consumer-focused products), a DIY build can be of any form my heart desires so long as the limitations of the form factor are compatible with the requirements. The performance to price ratio will almost certainly weigh heavily in favor of the build path, but at the cost of that sweet, sweet NAS aesthetic in all of its flashing activity lights and hot-swap bay glory. In the end, this build is just a collection of computer hardware. I will be building this computer myself rather than buying one COTS style.
+
+## Hardware
+The easiest part of a DIY NAS may be selecting the hardware. I use a PC hardware compatibility tool called PCPARTPICKER to ensure components that are compatible with all parts of the system.
+
+| Type          | Item                                                                         |
+| ------------- | ---------------------------------------------------------------------------- |
+| CPU           | Intel Pentium Gold G5400 3.7 GHz Dual-Core Processor                         |
+| Memory        | Crucial 16 GB (2 x 8 GB) DDR4-2400 CL17 Memory                               |
+| Motherboard   | ASRock H370M-ITX/ac Mini ITX LGA1151 Motherboard                             |
+| Case          | Fractal Design Node 304 Mini ITX Tower Case                                  |
+| Power Supply  | Corsair CX (2017) 450 W 80+ Bronze Certified ATX Power Supply                |
+| OS Disc       | WD Blue SA510 SSD                                                            |
+| Miscellaneous | SATA Power Splitter Adapter Cable - M/F - 4x Serial ATA Power Cable Splitter |
+|               | Zip Ties                                                                     |
+
+## Data Drives
+I can purchase my HDDs from my favorite retailer and received a big and fat juicy warranty and sleep well at night, reassured by the implications of my drives coming with something like a three year manufacturer warranty. OR I can consider the sneakier, riskier, more cost-effective play called "shucking".
+
+## Shucking
+Shucking is the practice of purchasing external storage devices such as Western Digital EasyStore, or Seagate Expansion and removing the raw 3.5" hdd inside. The external drives are meant to function as portable, high capacity external storage devices that interface with computers over USB (as opposed to an internal drive via e.g. SATA), but this does not need to be the case. Huge discounts can and were achieved with certain models of HDDs/external storage devices, but in the face of (small) risks such as accidentally damaging the drive during shucking, potentially voiding certain warranties, and dealing with the general uncertainty of the specifications of the drive inside the device.
+
+I have chosen to source my drives this way, and successfully shucked a total of 6 HDDs.
+
+| Type | Purpose          | Capacity | Device    |
+| ---- | ---------------- | -------- | --------- |
+| hdd  | data             | 12 TB    | /dev/sda  |
+| hdd  | data             | 12 TB    | /dev/sdb  |
+| hdd  | data             | 12 TB    | /dev/sdc  |
+| hdd  | data             | 12 TB    | /dev/sdd  |
+| hdd  | data             | 8 TB     | /dev/sde  |
+| hdd  | data             | 8 TB     | /dev/sdf  |
+| ssd  | operating system | 512 GB   | /dev/nvme |
+
+After installing all the hardware, the next step is to install an operating system on the OS drive. I prefer a Debian-based distribution, so I install the latest version. It makes more sense to install the OS before any of the disks, since I may be frequently cycling the power for troubleshooting purposes, and spinning up and down the discs this way will, however slightly, unnecessarily add wear-and-tear to the discs. My concern is probably on the verge of unhealthy paranoia.
+
+## Disk Testing
+The process is variable depending on how rigorous the tests are designed to be. It is a matter of personal preference and risk tolerance. The purpose is to run the disks in such a way as to reveal their flaws should they have any – in other words, to check for bad blocks, sectors, and evaluate the general health through other means that are yet mysterious to me. Ideally I will run the tests before the drives are removed from their enclosures. There are methods that take anywhere from a few hours to days and even weeks. Two tools that will be useful to me in disk testing are badblocks and smartctl. I do not say much about my disk testing here. I use both to determine that all of my drives are free of bad blocks and are healthy.
+
+```shell
+    sudo apt install e2fsprogs -y && apt install smartmontools
+    badblocks -b 4096 -wsv /dev/sda > badblocks_output.log
+```
+
+### Filesystem - ZFS
+The next step is to decide on the filesystem. There are several options but ZFS makes the most sense to me. It is a purpose-built file system and volume manager designed for long-term data storage. Using ZFS allows data to be "mirrored" across different drives so that in the event of single drive failure, no data is lost and there is no downtime. The process of repairing the NAS is basically as simple as installing a new disk in place of the failed drive and use the ZFS replace command to re-silver the new disk. The system is configured as a single pool, which acts as a single file storage device – it can be mounted as a single directory. The pool consists of one zpool which consists of three vdevs , each of which are two-drive mirrors.
+
+```
+    sudo zpool status
+     NAME        STATE     READ WRITE CKSUM
+        hdd1        ONLINE   0     0     0
+          mirror-0  ONLINE   0     0     0
+            sda     ONLINE   0     0     0
+            sdb     ONLINE   0     0     0
+          mirror-1  ONLINE   0     0     0
+            sdd     ONLINE   0     0     0
+            sdc     ONLINE   0     0     0
+          mirror-2  ONLINE   0     0     0
+            sde     ONLINE   0     0     0
+            sdf     ONLINE   0     0     0
+```
+
+
+
+
+
+## Maintenance
+During the install process, ZFS may automatically create two cron jobs at /etc/cron.d/zfsutils-linux This is sort of self explanatory but these cron jobs will run once a month to perform TRIM and Scrub operations on the filesystem.
+
+```shell 
+cat /etc/cron.d/zfsutils-linux
+
+# TRIM the first Sunday of every month.
+24 0 1-7 * * root if [ $(date +\%w) -eq 0 ] && [ -x /usr/lib/zfs-linux/trim ]; then /usr/lib/zfs-linux/trim; fi
+
+# Scrub the second Sunday of every month.
+24 0 8-14 * * root if [ $(date +\%w) -eq 0 ] && [ -x /usr/lib/zfs-linux/scrub ]; then /usr/lib/zfs-linux/scrub; fi
+```
+
+## Network Share - Samba
+This is where the computer turns into a NAS – where I will expose the mount point of the filesystem to the network, allowing authorized users to read and write to the filesystem. I use samba to do this. Here I install and configure the service.
+
+```shell
+  sudo apt update && sudo apt install samba -y
+  sudo nano /etc/samba/smb.conf
+```
+
+Appended the following lines to `smb.conf`
+
+```
+[hdd1]
+   comment = Some useful files
+   read only = no
+   guest ok = no
+   path = /hdd1
+   valid users = nicholas
+``` 
+This configuration enables one network share: `hdd1`. The path variables refer to the directory of the ZFS pool.
+
+Samba requires its own password for each user to authenticate. Even if user nicholas already has password, he needs a separate Samba password.
+
+```shell
+sudo smbpasswd -a nicholas
+```
+
+The user also needs permissions
+
+Now I restart Samba.
+
+```shell
+sudo service smbd restart
+```
+
+I should be able to access this share using the credentials of valid user which was defined in `/etc/samba/smb.conf`.
+
+Done.
\ No newline at end of file
diff --git a/container/site/content/posts/nas-build-pt-ii/index.md b/container/site/content/posts/nas-build-pt-ii/index.md
new file mode 100644
index 0000000..f062f63
--- /dev/null
+++ b/container/site/content/posts/nas-build-pt-ii/index.md
@@ -0,0 +1,26 @@
++++
+categories = ["technology","build"]
+date = 2024-11-15T17:43:02Z
+description = ""
+draft = false
+slug = "server-build-refresh"
+title = "💾 Server Build Refresh"
+author = "nicholas"
++++
+
+My NAS server only has 16 GB RAM. I upgrade this to 32 GB. upgrade the OS disk and move the components from a Fractal Design Node 304 desktop chassis to a Rosewill RSV-R4000U rack-mount chassis. 
+
+## Components
+| Type         | Item                                                    |
+| ------------ | ------------------------------------------------------- |
+| CPU          | Intel Pentium Gold G5400 3.7 GHz Dual-Core Processor    |
+| Motherboard  | ASRock H370M-ITX/ac Mini ITX LGA1151 Motherboard        |
+| Memory       | Crucial CP2K16G4DFRA32A 32GB Kit (2x16GB) DDR4 3200MHz  |
+| Storage      | Samsung SSD 970 EVO Plus 500GB                          |
+| Case         | Rosewill RSV-R4000U 4U Server Chassis                   |
+| Power Supply | EVGA 450 BR 450 W 80+ Bronze Certified ATX Power Supply |
+
+## Upgrading
+In a previous log entry I documented the build process of my storage server. At the time its only intended purpose was managing my file storage and hosting a media streaming service. Its purpose has expanded to a degree that it begs for additional RAM. I will double the RAM from 16GB to 32 GB, reaching the limitations of the motherboard. I will replace the WD Blue SA510 SSD storage drive, (which will replace a very slow mechanical drive in a laptop), with a Samsung 970 EVO Plus. Old and new components will be installed in a new chassis Rosewill RSV-R4000U and rack-mounted alongside the other computer.
+
+{{< gallerynew name="nas-build-gallery" >}}
\ No newline at end of file
diff --git a/container/site/content/posts/nas-build-pt-ii/nas-build-gallery.yaml b/container/site/content/posts/nas-build-pt-ii/nas-build-gallery.yaml
new file mode 100644
index 0000000..08c5fa2
--- /dev/null
+++ b/container/site/content/posts/nas-build-pt-ii/nas-build-gallery.yaml
@@ -0,0 +1,13 @@
+images:
+  - src: "images/server-case-view.JPG"
+    alt: "View of a server case."
+    caption: "Server case overview."
+  - src: "images/server-draw-open.JPG"
+    alt: "Server drawer pulled open."
+    caption: "Open server drawer."
+  - src: "images/server-hdd-bays.JPG"
+    alt: "Hard drive bays in a server."
+    caption: "Server HDD bays."
+  - src: "images/server-hdd-fans.JPG"
+    alt: "Cooling fans near hard drives in a server."
+    caption: "Server HDD cooling fans."
diff --git a/container/site/content/posts/pacific-northwest/images/DSC_7705.JPG b/container/site/content/posts/pacific-northwest/images/DSC_7705.JPG
new file mode 100644
index 0000000..f639384
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/DSC_7705.JPG
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:3c656bcf276088261f2813eac6b6d0ad34be8e102e3cfb6696b803180d75c650
+size 8411676
diff --git a/container/site/content/posts/pacific-northwest/images/DSC_7707.JPG b/container/site/content/posts/pacific-northwest/images/DSC_7707.JPG
new file mode 100644
index 0000000..00c900c
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/DSC_7707.JPG
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:1be37f12c244cc83fa79d48c786c0d645e2ff2bbed3511ac9f985d7569be0b19
+size 12627656
diff --git a/container/site/content/posts/pacific-northwest/images/DSC_7709.JPG b/container/site/content/posts/pacific-northwest/images/DSC_7709.JPG
new file mode 100644
index 0000000..f0fe551
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/DSC_7709.JPG
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:8f99b7b607b51f640b01d4d6a7495994abf476b2eb4b211b10d02a87df6e0fe4
+size 10496525
diff --git a/container/site/content/posts/pacific-northwest/images/DSC_7710.JPG b/container/site/content/posts/pacific-northwest/images/DSC_7710.JPG
new file mode 100644
index 0000000..62327dc
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/DSC_7710.JPG
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:5663617799353daecb27ea1cbcd983b15e1bdb5fc29d66ee89783903dc203f16
+size 12165934
diff --git a/container/site/content/posts/pacific-northwest/images/DSC_7725.JPG b/container/site/content/posts/pacific-northwest/images/DSC_7725.JPG
new file mode 100644
index 0000000..9494019
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/DSC_7725.JPG
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:921df5d710c56fcbfd141e1ecaa496a45a8a1a79c863f4362f90b6a5189f5da5
+size 9422776
diff --git a/container/site/content/posts/pacific-northwest/images/DSC_7729.JPG b/container/site/content/posts/pacific-northwest/images/DSC_7729.JPG
new file mode 100644
index 0000000..aae69ee
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/DSC_7729.JPG
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:f04279eb9759678bc25898eb9fcf9d3c861ca9d9b224a1e779e66b9cb7e0bfb0
+size 12796015
diff --git a/container/site/content/posts/pacific-northwest/images/DSC_7730.JPG b/container/site/content/posts/pacific-northwest/images/DSC_7730.JPG
new file mode 100644
index 0000000..136e8a9
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/DSC_7730.JPG
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:2b448ffd621b45135229a34d20cd20f19a314c601a70b40b19db38ca472ad0ee
+size 11945114
diff --git a/container/site/content/posts/pacific-northwest/images/DSC_7805.JPG b/container/site/content/posts/pacific-northwest/images/DSC_7805.JPG
new file mode 100644
index 0000000..74cf001
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/DSC_7805.JPG
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:78b39521c1b05539619ba1f36dea734842527ab7d8eb79c26e09b52fd211a994
+size 13314818
diff --git a/container/site/content/posts/pacific-northwest/images/DSC_7813.JPG b/container/site/content/posts/pacific-northwest/images/DSC_7813.JPG
new file mode 100644
index 0000000..eb2d218
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/DSC_7813.JPG
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:5dd6485abfc0425050b26620687ab9d75752c3b98eb1b8ded02529d17cd02c0a
+size 12837110
diff --git a/container/site/content/posts/pacific-northwest/images/DSC_7825.JPG b/container/site/content/posts/pacific-northwest/images/DSC_7825.JPG
new file mode 100644
index 0000000..8996085
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/DSC_7825.JPG
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:3cdd5b79e091bcf1ddce6ca49e9b5db726cd2b5582e4fccb13956b3cea32eee6
+size 10094598
diff --git a/container/site/content/posts/pacific-northwest/images/DSC_7886.JPG b/container/site/content/posts/pacific-northwest/images/DSC_7886.JPG
new file mode 100644
index 0000000..b10115f
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/DSC_7886.JPG
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:62d1fdf5c70da34c7074a624e23b8534777cb7d904d9698a08cf0dab88d407cc
+size 12434399
diff --git a/container/site/content/posts/pacific-northwest/images/DSC_7930.JPG b/container/site/content/posts/pacific-northwest/images/DSC_7930.JPG
new file mode 100644
index 0000000..55ce8ce
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/DSC_7930.JPG
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:48f377d37d24b9a178b36a42d433516f7321475806629222240efde1b57dcab3
+size 9214058
diff --git a/container/site/content/posts/pacific-northwest/images/DSC_7954.JPG b/container/site/content/posts/pacific-northwest/images/DSC_7954.JPG
new file mode 100644
index 0000000..b0d1269
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/DSC_7954.JPG
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:cc7d89211b461cd984ba9d3d5c50c26f5168d6adf8657398ccb235414af757ab
+size 3859808
diff --git a/container/site/content/posts/pacific-northwest/images/DSC_7972.JPG b/container/site/content/posts/pacific-northwest/images/DSC_7972.JPG
new file mode 100644
index 0000000..14ea57f
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/DSC_7972.JPG
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:ce23c6165d019b996ebd4f2a5aa520c524b7113d6f1f037366257dd7f416e130
+size 8792237
diff --git a/container/site/content/posts/pacific-northwest/images/DSC_7986.JPG b/container/site/content/posts/pacific-northwest/images/DSC_7986.JPG
new file mode 100644
index 0000000..fe72dd3
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/DSC_7986.JPG
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:882515afacf9be9326b98bf91128fefa2d61cc4a9ebb38ce29cd8d824b90c4d6
+size 8395666
diff --git a/container/site/content/posts/pacific-northwest/images/DSC_8008.JPG b/container/site/content/posts/pacific-northwest/images/DSC_8008.JPG
new file mode 100644
index 0000000..388ab80
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/DSC_8008.JPG
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:efcf8f49f535f2744f65bf549717b34039a27e6e35eace7ac7d77a38b472a01f
+size 8542134
diff --git a/container/site/content/posts/pacific-northwest/images/DSC_8009.JPG b/container/site/content/posts/pacific-northwest/images/DSC_8009.JPG
new file mode 100644
index 0000000..5b2774f
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/DSC_8009.JPG
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:359868a8fbb9dd8a4769866120f395b250083d409e97ab7b07fddb95f7780c4e
+size 10427805
diff --git a/container/site/content/posts/pacific-northwest/images/DSC_8019.JPG b/container/site/content/posts/pacific-northwest/images/DSC_8019.JPG
new file mode 100644
index 0000000..be18bea
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/DSC_8019.JPG
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:2c3ed17720177b59ee1fabecf648bd756b3f9f1f9936c7a15a0ecb2579eb49ea
+size 8984123
diff --git a/container/site/content/posts/pacific-northwest/images/DSC_8044.JPG b/container/site/content/posts/pacific-northwest/images/DSC_8044.JPG
new file mode 100644
index 0000000..3db5c0a
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/DSC_8044.JPG
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:4cb25d98a9f6d36a92520caee77eb1e1cef60102a3155873bd89bb1f58f88bd9
+size 8570195
diff --git a/container/site/content/posts/pacific-northwest/images/PXL_20230503_125714405.jpg b/container/site/content/posts/pacific-northwest/images/PXL_20230503_125714405.jpg
new file mode 100644
index 0000000..1d85398
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/PXL_20230503_125714405.jpg
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:cee02e4864be81c71e070dd8925ad13bc3861391e3ab0dcedce77421e52e26e0
+size 3475616
diff --git a/container/site/content/posts/pacific-northwest/images/PXL_20230503_132730963.jpg b/container/site/content/posts/pacific-northwest/images/PXL_20230503_132730963.jpg
new file mode 100644
index 0000000..4b2ad55
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/PXL_20230503_132730963.jpg
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:412ea4011511888237c8f2b3e8820915633d74424db75b8563408c5555d586e7
+size 3624368
diff --git a/container/site/content/posts/pacific-northwest/images/PXL_20230503_133030961.jpg b/container/site/content/posts/pacific-northwest/images/PXL_20230503_133030961.jpg
new file mode 100644
index 0000000..14363ec
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/PXL_20230503_133030961.jpg
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:d99154b9b52fc68a246075ebdc202cf64cf60756ce4018b36cffa3ad70d623e4
+size 3157226
diff --git a/container/site/content/posts/pacific-northwest/images/PXL_20230503_223551382.jpg b/container/site/content/posts/pacific-northwest/images/PXL_20230503_223551382.jpg
new file mode 100644
index 0000000..b71d2f2
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/PXL_20230503_223551382.jpg
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:8ac22dd09381926683a627810425f8990228c39d75a75591af396bac170aec74
+size 7597749
diff --git a/container/site/content/posts/pacific-northwest/images/PXL_20230503_223823824.jpg b/container/site/content/posts/pacific-northwest/images/PXL_20230503_223823824.jpg
new file mode 100644
index 0000000..e9b6996
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/PXL_20230503_223823824.jpg
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:77a6014dfdee701d24d4f71f167525756287652e3501c50b3ba0be4b40f0574e
+size 5505053
diff --git a/container/site/content/posts/pacific-northwest/images/PXL_20230504_202149667.jpg b/container/site/content/posts/pacific-northwest/images/PXL_20230504_202149667.jpg
new file mode 100644
index 0000000..7de3a48
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/PXL_20230504_202149667.jpg
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:318b3f6d506530874b495c4bcb85a0c11015fb58fb8d5b3dd528669f1cda3bc8
+size 4160459
diff --git a/container/site/content/posts/pacific-northwest/images/PXL_20230505_162634712.jpg b/container/site/content/posts/pacific-northwest/images/PXL_20230505_162634712.jpg
new file mode 100644
index 0000000..9561cf5
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/PXL_20230505_162634712.jpg
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:58f1650dae2f0d89d6277c22b367e46c98df9178a0cce9dbbca19e4345fdf441
+size 5911011
diff --git a/container/site/content/posts/pacific-northwest/images/PXL_20230505_224507143.jpg b/container/site/content/posts/pacific-northwest/images/PXL_20230505_224507143.jpg
new file mode 100644
index 0000000..2c921c5
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/PXL_20230505_224507143.jpg
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:d164eb220a631f81b80afea565b9e25769992100aa506b56beff8e52fb26adab
+size 4770424
diff --git a/container/site/content/posts/pacific-northwest/images/PXL_20230505_225612504.jpg b/container/site/content/posts/pacific-northwest/images/PXL_20230505_225612504.jpg
new file mode 100644
index 0000000..05e9a32
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/PXL_20230505_225612504.jpg
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:eee0ce15d53ddb8644ee717bfb88c32a72755769b3041d8ec3e38bf6ac651d71
+size 7022910
diff --git a/container/site/content/posts/pacific-northwest/images/PXL_20230505_232206434.jpg b/container/site/content/posts/pacific-northwest/images/PXL_20230505_232206434.jpg
new file mode 100644
index 0000000..a30c4c2
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/PXL_20230505_232206434.jpg
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:92a49cd6cd0221ffa57b5e04e6bd65c838f0de9fd6de5f449581e65723218126
+size 3565111
diff --git a/container/site/content/posts/pacific-northwest/images/PXL_20230506_030136974.jpg b/container/site/content/posts/pacific-northwest/images/PXL_20230506_030136974.jpg
new file mode 100644
index 0000000..6288223
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/PXL_20230506_030136974.jpg
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:e64956786426f187f91bc4436a71c26c05e255b248a713340ca42b79635d5793
+size 4166669
diff --git a/container/site/content/posts/pacific-northwest/images/PXL_20230507_190044473.jpg b/container/site/content/posts/pacific-northwest/images/PXL_20230507_190044473.jpg
new file mode 100644
index 0000000..d3ae1a3
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/PXL_20230507_190044473.jpg
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:9781460a7bf8e87659d7fa1fbb86da45da8627210c0b08ad226f1206bbc64d37
+size 5499274
diff --git a/container/site/content/posts/pacific-northwest/images/PXL_20230507_195504996.jpg b/container/site/content/posts/pacific-northwest/images/PXL_20230507_195504996.jpg
new file mode 100644
index 0000000..343ad46
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/PXL_20230507_195504996.jpg
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:5fed08378804c9a178c94f1b6e89bf08e4249fc853fb9bc4e3e536f5519c6965
+size 3515304
diff --git a/container/site/content/posts/pacific-northwest/images/PXL_20230507_232645677.jpg b/container/site/content/posts/pacific-northwest/images/PXL_20230507_232645677.jpg
new file mode 100644
index 0000000..4bd8484
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/PXL_20230507_232645677.jpg
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:d2fcb37eefe0e940adadfbce71b6dd3f1d7a601326ab33f3ba1e64e76429aa28
+size 2572044
diff --git a/container/site/content/posts/pacific-northwest/images/PXL_20230509_024655993.jpg b/container/site/content/posts/pacific-northwest/images/PXL_20230509_024655993.jpg
new file mode 100644
index 0000000..3f1bb35
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/images/PXL_20230509_024655993.jpg
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:90822d728d4d471f32a8761b249a6b8592b9878ce732db53280f85558030d0f1
+size 3499334
diff --git a/container/site/content/posts/pacific-northwest/index.md b/container/site/content/posts/pacific-northwest/index.md
new file mode 100644
index 0000000..3458e65
--- /dev/null
+++ b/container/site/content/posts/pacific-northwest/index.md
@@ -0,0 +1,26 @@
++++
+categories = ["travel"]
+date = 2023-05-31T12:00:00-05:00
+description = ""
+draft = false
+slug = "pacific-northwest"
+title = "🌲 Pacific Northwest"
+author = "nicholas"
++++
+
+`05-02-2023 to 05-09-2023`
+
+Bailey and I went to PNW coast for a few days.
+
+- Seattle, Tacoma
+- Port Townsend
+- Wilderness Rim
+- Cannon Beach
+- Rockaway Beach
+- Cape Meares
+- La Push (à la *Twilight*)
+
+
+## Photo Gallery
+{{< gallerynew name="pnw-gallery" >}}
+
diff --git a/container/site/content/posts/pacific-northwest/pnw-gallery.yaml b/container/site/content/posts/pacific-northwest/pnw-gallery.yaml
new file mode 100644
index 0000000..e69de29
diff --git a/container/site/content/posts/papa-johns-garlic-butter/index.md b/container/site/content/posts/papa-johns-garlic-butter/index.md
new file mode 100644
index 0000000..deae8ba
--- /dev/null
+++ b/container/site/content/posts/papa-johns-garlic-butter/index.md
@@ -0,0 +1,94 @@
++++
+categories = ["food"]
+tags = ["reverse-engineer","papa johns"]
+date = 2024-07-15T22:56:46Z
+description = ""
+draft = false
+slug = "papa-johns-garlic-butter"
+title = "🧈 Papa John's Garlic Butter Dipping Sauce"
+author = "nicholas"
++++
+
+## Where to start
+I am given a couple of obvious places to start:
+ 1. Nutrition Facts – This will give me the actual weights of various parts of the formulation
+ 2. Ingredient Statement - This will tell me the relative order of ingredients by weight
+Combining these two alone can sometimes give away almost all of the formula if it is simple enough.
+
+## Nutrition Facts
+
+{{< image
+  src="images/papa-johns-garlic-sauce-nutrition.jpeg"
+  caption="Papa Johns Garlic Sauce nutrition" >}}
+
+
+I found a table on Papa John's website that lists nutrition information for their Garlic Sauce. Much of this information I can ignore – things like cholesterol, sat, trans fat. This is not important to me. I am interested in the information that I list in the table below:
+
+| Data             | Amount |
+| ---------------- | ------ |
+| total weight     | 28 g   |
+| total fat weight | 17 g   |
+| sodium           | 310 mg |
+| total calories   | 150    |
+Right away I know fat / oil will make up around 61% of the sauce, and weight of the salt is plainly listed.
+
+## Ingredient Statement
+Also found on the Papa Johns website is an ingredient statement for each of their dipping sauces – namely their Garlic Sauce. This will be useful in establishing relative amounts since the ingredients are listen in descending order by weight as per FDA guidelines.
+
+{{< image
+  src="images/papa-johns-garlic-sauce-ingredient-list.jpeg"
+  caption="Papa Johns garlic sauce ingredient list" >}}
+
+### Crisco Butter Flavor Shortening
+
+{{< image
+  src="images/crisco-ingredient-list.PNG"
+  caption="Crisco ingredient list" >}}
+
+Notice "Hydrogenated Soybean Oil", "Vegetable Mono and Diglycerides", "Natural Flavors", and "Beta Carotene". Each of these ingredients (or one similar enough for my purposes, in the case of Hydrogenated Palm Oil) is found in butter flavored vegetable shortening. I will assume this is the major component of the sauce.
+
+### Remaining Unknowns
+The intersection of the butter flavor shortening ingredient list and the garlic sauce ingredient list will produce the set of ingredients whose relative quantities I need not consider, since the composition of the butter flavor shortening is fixed and will be present in the garlic sauce in the same relative amounts no matter how much I use. The list of ingredients not shared between the two ingredient lists are the ingredients whose relative quantities I do need to derive:
+`water`, salt, dehydrated garlic, soy lecithin
+
+#### Salt
+Of these, I can most easily derive the quantity of salt since I am given the amount of sodium present (salt is a sodium). Since sodium benzoate is is much further down the list I will pretend it is there in such a small amount as to not matter. The FDA allows sodium Benzoate to be present in foods in amounts not exceeding 0.1% of total weight of the food. This means there would be at most 0.028 g of sodium benzoate in the garlic sauce, which accounts for ~4.46 mg of the total 310 mg sodium – a trivial amount.
+This is the formula I use to convert the weight of sodium to weight of salt:
+
+salt (g) = (sodium (mg)) / 1000 * 2.54
+salt (g) = (310 / 1000) * 2.54
+salt = 0.7874 g
+$5 \times \text{salt} = \text{banana}$
+
+#### Fat
+I know there are 17 grams of fat in 28 grams of Garlic Sauce. I will assume this comes entirely from the various oils found in the butter flavor shortening. This leaves me with the following list:
+17g shortening, water, 0.79g salt, dehydrated garlic, soy lecithin
+
+#### Water
+I know that the amount of water will be between 17g and 0.79g. Not useful. However, ignoring garlic and soy lecithin I can get close enough to the water amount (since it is effectively the last remaining ingredient) by subtracting each of the previously discovered amounts from the total amount:
+water = 28 - 17 - 0.79 - SUM(garlic, soy lecithin)
+Water will account for no more than 10.2 g of the total weight of the garlic sauce.
+
+## Putting it all together
+| Ingredient           | Amount g |
+| -------------------- | -------- |
+| butter flavor crisco | 17       |
+| water                | 11       |
+| salt                 | 0.8      |
+| dehydrated garlic    | ?        |
+| soy lecithin         | ?        |
+
+Since I am not given enough clues to make reasonable judgments on the ~exact amounts of garlic and soy lecithin, I am left to invent these on my own. It is known that each will be present in amounts less than 0.8 g, but that is all that can be known with respect to actual numbers.
+
+## The Subjective Part
+Soy lecithin and dehydrated / powdered garlic will be added in amounts that most closely match the texture and taste of the garlic sauce, respectively.
+I came up with a lazy method that I consider successful – I am allowed to be lazy since there is a wide margin for error due to the subjectivity in assessing final product.
+First I begin by mixing and melting a reasonable total weight of all but the soy lecithin and garlic in a bowl (100 g), double-boiler style. Then I move the mixture to a blender and blend until smooth and emulsified.
+
+### Garlic Powder
+As part of my lazy process, I chose to add garlic powder first because it can alter the taste and texture, whereas the lecithin will affect only the texture. As much as possible the changes should take place up front. Additions that have small or singular effects should be added last. The garlic powder will be less than 2% of the total mixture, so I begin by adding a conservative 0.5% garlic powder. I can always add more if it is not garlicky enough. This turned out to be close. Eventually I settled on ~0.6%.
+
+### Soy Lecithin
+Lecithin is an emulsifier – it will bind the water to the fat and create a smooth creamy sauce. To continue the process, I add soy lecithin in increments of ~0.1% by weight until the blended mixture resembled the garlic sauce at the same temperature, which resulted in eventually adding a total of 0.5% by weight of the total weight of the mixture. The formulation is complete:
+
+Done.
\ No newline at end of file
diff --git a/container/site/content/posts/pc-build/index.md b/container/site/content/posts/pc-build/index.md
new file mode 100644
index 0000000..58f4e29
--- /dev/null
+++ b/container/site/content/posts/pc-build/index.md
@@ -0,0 +1,55 @@
++++
+categories = ["technology","build"]
+date = 2024-11-15T17:43:08Z
+description = ""
+draft = false
+slug = "pc-build"
+title = "🖥️ PC Build"
+author = "nicholas"
++++
+
+Among its more-than-enough problems, my laptop is slow, and has terrible I/O: (two USB C ports, one of which is almost always occupied by a cable for an external monitor, the other a power cable).I want to be able to do *work* on my computer, not just consume web content. I am frequently making contact with the limitations of this machine when I try to edit videos or photos. It is sluggish and painful, and sometimes even software development is unpleasant. I need not complain too much, or justify myself any more here. I will build a new PC.
+
+## Components
+| Type         | Item                                                                         |
+| ------------ | ---------------------------------------------------------------------------- |
+| CPU          | Intel Core Ultra 7 265K 3.9 GHz 20-Core Processor                            |
+| CPU Cooler   | Noctua NH-D12L 60.09 CFM CPU Cooler                                          |
+| Motherboard  | ASRock Z890 Pro-A ATX LGA1851 Motherboard                                    |
+| Memory       | Corsair Vengeance 64 GB (2 x 32 GB) DDR5-5600 CL40 Memory                    |
+| Storage      | Crucial P3 Plus 1 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive             |
+| Power Supply | Corsair RM650 (2023) 650 W 80+ Gold Certified Fully Modular ATX Power Supply |
+| Case         | Rosewill RSV-R4000U 4U Server Chassis                                        |
+| Mount        | iStarUSA TC-RAIL-20 20" Sliding Rail Kit                                     |
+| Case Fans    | ARCTIC P8 PWM PST 80 mm Case Fan                                             |
+
+### New Parts
+Every component of this build will be new to me. The last time I purchased a desktop PC was in 2013 (Dell XPS 8500 with i7-3770 and 16GB RAM) – it has been a decade since I have enjoyed the superior performance of a new-spec'd desktop computer.
+
+ * **CPU – Intel Core Ultra 7 265K**
+   * If I were to take a snapshot of this moment in time that captures the general reaction by tech reviewers to the release of this CPU and show it to you, it would seem like I made a huge mistake in my CPU selection. If one heeds only to the sunken and dispirited moaning of mainstream tech reviewers, one comes away with the sense that this is simply a bad CPU, but this sense can be misleading. As far as I can tell, nearly all of the sad noises are being made because of disappointing performance in gaming, an activity for which I am blessed to have no desire.
+   * Opinions in the desktop hardware space tend to revolve around gaming benchmarks, and I think gamers must account for a huge share of their readership, so it only makes sense. It is unwise to base my opinion on the supposed wisdom of these particular masses.
+   * The good news is that for non-gaming use cases such as software development, productivity tasks, and multi-threaded workloads, this CPU is strong, power efficient, and easy to cool.
+ * **Motherboard - ASRock Z890 Pro A Wifi**
+   * At this time I am forced to select a Z series motherboard – cheaper, budget motherboards in the B series are not to be released until 2025. Life is too short to wait.
+   * There were no special considerations, I selected the cheapest board.
+ * **Memory - Corsair Vengeance 64 GB DDR5-5600 CL40**
+   * This leaves 2 memory slots available if I manage to need more.
+   * I may end up turning the machine into a virtualization host.
+ * **Storage - Crucial P3 Plus 1 TB**
+   * I have modest capacity and speed requirements for my OS storage drive. 1 TB is plenty – most of my files live on my NAS and NVME gen 4 is fast enough. It was inexpensive.
+ * **Power Supply - Corsair RM650 650W**
+   * According to PCPARTPICKER tool, the total power consumption of the unit will be < 400 w. This gives me headroom for additional components. I have no plans to add a graphics card, but if I did I expect it would not be so powerful as demand power that increases total power consumption beyond 650 watts.
+ * **Case - Rosewill RSV-R4000U**
+   * I chose to use a rack mounted case entirely because it can be fastened to a server rack on wheels.
+ * **Case Fans - ARCTIC P8 PWM**
+   * The stock fans that are included with the case are noisy and run at full RPM when the computer is powered on. It is unnecessary to blow such a large volume of air during light workloads, and the noise is annoying. Now the CPU fans can run at whatever RPM is appropriate to keep the CPU cool.
+
+## Assembly
+The process of assembly was straightforward. I simply followed the instructions included on each component. I do not mean to denigrate the hobby of PC-building, or lego-building but the reality is that the process truly felt like lego for adults. There is no "creativity" or problem-solving involved, I become an Ikea furniture assemblyman. It was pleasant for everything to go according to plan, though, and to have no real obstacles or issues along the way. Everything worked! PC building is a solved problem.
+
+## Results
+
+![Inside](images/inside.jpg)
+
+Done.
\ No newline at end of file
diff --git a/container/site/content/posts/photogrammetry/index.md b/container/site/content/posts/photogrammetry/index.md
new file mode 100644
index 0000000..659da16
--- /dev/null
+++ b/container/site/content/posts/photogrammetry/index.md
@@ -0,0 +1,158 @@
++++
+categories = ["software"]
+tags = ["photogrammetry"]
+date = 2025-07-02T20:00:00-05:00
+description = ""
+draft = false
+slug = "photogrammetry"
+title = "🗿 Photogrammetry - Tongan Wood Carving"
+author = "nicholas"
++++
+
+I was gifted a beautiful yet somewhat haunting, grimacing figure, carved of wood, which I am told was gifted to one of my great uncles by the king of Tonga himself. I do know quite what to do with this object besides to proudly display it on a small table by the front door of my apartment. But what if I lost it? What if it just vanished? As its new caretaker, I figured it would be prudent to digitally preserve this artifact. After all, if I take seriously the [dubious claimed provenance](#-god-figure) of the item, I am dealing with the once-property of a king!
+
+
+## 🚁 Drone Mapping
+In the past I would fly drones around my hometown and make 3D models and ultra-high-res aerial maps using a RC quad-copter (*DJI Phantom 4 Standard*). This was before the FAA implemented *14 CFR Part 107*, which frankly sucked the fun out of flying the drone. I sold it a few years of disuse. Many years later I have returned to this technology, but this time I will use a conventional camera (*Nikon Z50*) instead of a drone-mounted camera. Same principle, though.
+
+For example, here is a 3D model of the courthouse in my hometown that I created.
+
+{{< modelviewer
+    src="models/courthouse.glb"
+    alt="3D Model of courthouse" >}}
+
+## 📷 Image Capture
+
+To capture good images for the totem 3D model, I will need good lighting. I use the natural sunlight from the gigantic sliding plexi-glass door to the deck to illuminate the object. I also use the two [plant grow lights]({{< relref "posts/grow-lights" >}}), adjusting their angles. This gives me plenty of light to capture the images at low ISO and narrow aperture, which are necessary to obtain high quality, high depth of field images. The latter allows me to have all of the elements of the totem mostly in focus without focus-stacking. 
+
+**Turntable:**
+I use *Ateco 12" Cake Decorating Stand* as my turn-table, and an unfortunately very heavily linted cloth napkin over the top, to avoid capturing the reflective finish of the aluminum. 
+
+**Background:**
+The backdrop is a black blanket draped over the coffee table.
+
+**Camera Settings:**
+ - **Camera:** Nikon Z50 
+ - **Lens:** NIKKOR Z DX 16-50mm
+ - **ISO:** 100
+ - **Aperture:** f/8
+ - **Shutter Speed:** 1/8s
+ - **Focal Length:** 35mm
+
+I also use the **Time-lapse sequence** feature to automatically capture one frame every 4 seconds. This allows me to spin the turntable ~10° between each shot (I aim to capture ~40 images). 
+
+**Angles, Positions, Framing, Focus**
+- Center the item on the turntable
+- Position camera at a height such that subject is ~30° below
+- Distance the tripod so that totem occupies much of the frame
+- **Manual** shooting mode and focus to keep images consistent
+
+Here is a sample photo that gets turned into a 3D object.
+
+{{< image 
+src="images/totem-on-turntable.JPG" 
+caption="Totem on turntable" >}}
+
+As one can see from the photo, there is much room for improvement, e.g.
+- Cleaner, Vanta black background
+- Shadowless lighting
+- Greater depth of field
+- Reduce shininess of model
+
+
+My capture setup is clumsy and ad-hoc, but it worked for my purpose.
+
+---
+
+## 🖼️ Image Processing
+After I capture the photos, I process them in a couple of places.
+
+- **Agisoft Metashape**
+    - align photos
+    - build point cloud
+    - build model
+    - build textures
+    - export `.obj`
+
+This results in a complete model with textures. However, if I want to edit the model, or to convert it to a different format (`.glb`), or animate it, I use Blender. There is a lot of things I *could* do at this stage to refine and improve my model, but a quick and dirty model is all I want. The pareto principle, law of diminishing returns seems to apply here.
+
+Here I use Blender to animate my model spinning around.
+
+- **Blender**
+    - import `.obj`
+    - position camera
+    - add lighting
+    - add animation keyframes
+    - adjust output settings (resolution, FPS, etc.)
+    - render animation frames
+
+{{< image 
+src="images/totem-blender-animation.png" 
+caption="Exporting frames in Blender" >}}
+
+According to the selected options, after this last step I now have a a series of frames that I can make into a video with `ffmpeg`. In the examples below, I am creating `.webp` images.
+
+
+**60fps, 80 quality, 480p**
+```shell
+ ffmpeg -framerate 60 -i %04d.png -vf "scale=480:-1" -vcodec libwebp_anim -q:v 80 -loop 0 -pix_fmt yuva420p tonga-60fps-80q-480p.webp
+```
+**lossless**
+```shell
+ ffmpeg -framerate 60 -i %04d.png -vcodec libwebp_anim -lossless 1 -loop 0 -pix_fmt yuva420p tonga-60fps-lossless-1920p.webp
+```
+
+## 📦 Results
+{{< image 
+    src="images/tonga-60fps-80q-480p.webp"
+    caption="WEBP image/video" >}}
+
+
+{{< modelviewer
+    src="models/tonga.glb"
+    poster="images/tonga-60fps-80q-480p.webp"
+    alt="tonga" >}}
+
+I also scanned a randomly selected book.
+
+{{< modelviewer
+    src="models/book.glb"
+    alt="Book" >}}
+
+Done.
+
+## 🗿 God Figure
+> Source: [Museum of New Zealand](https://collections.tepapa.govt.nz/object/1314394?page=1&rtp=1&ros=1&asr=1&assoc=all&mb=o)
+
+{{< image 
+    src="images/god-figure-carving-museum-website.png"
+    caption="God figure page from the website" >}}
+
+ ### Overview
+
+This is a wood carving made in Tonga in 1983. It is small and portable and made from a light timber with a dark grain. It is one of several carved figures in the Pacific Cultures Collection made for the tourist market in Tonga in the mid to late twentieth century.
+
+**Significance**
+
+In the 1800s, wood carving was a well-established art form in Tonga. By the mid-1900s, it had diminished as the religious and customary contexts for its production had radically changed. In the 1960s and 1970s, visiting cruise ships to Nukualofa were a major market for handicrafts and curios. Tourism to Tonga stimulated a revival of wood carving in a range of mainly non-indigenous forms. In 1984, Kernot noted that these included Hawaiian style temple figures, generalised "Polynesian" figures, mermaid and warrior figures.
+
+**A Pan-Pacific Style**
+
+This particular figure fits within a carving style that anthropologist Philip Dark described as *Pan-Pacific*. These carvings emphasised a "grimacing mouth", which would appear to have its origins in Hawaiian carvings, such as those of the atua (god) Kuka’ilimoku. Similar composite works typical of the time feature Tahitian style blended with Marquesan forms. Hawaiian style carvings and pseudo-Marquesan tiki had been carved and sold in Samoa since 1965 and in Tonga by at least the 1970s (Dark 1990:258).
+
+A Tongan handicraft guide published in 1980 states:
+
+> "The carvings in Tonga have a chunky, stolid power about them that says clearly that they come from the South Pacific. Although those for sale are not sacred images, many are reminiscent of such ancient origins… Although many of the pieces they carve follow traditional designs, many carvers have their own specialities. One may see carvings of splendid dragons and many varieties of tiki, the Polynesian god image… But some of the better carvers concentrate on making excellent copies of intricately incised wooden linen chests and lampstands… for which there is a market"  
+> *(anon. 1980:21-22)*
+
+Although these items were examples of the skills of Tongan artists as wood carvers, they were not part of any previously documented tradition of woodcarving in those islands.
+
+**Acquisition History**
+
+This carving is part of a larger group of items collected by Bernie Kernot in 1983–1984 while on university sabbatical to Tonga, Fiji and Samoa. The carved items are from the workshop of Nau in Nukualofa. At this time, he was also on the executive of the Pacific Arts Association (PAA) and while on this trip he publicised the PAA among Pacific academics and artists. Kernot was a senior lecturer in anthropology and Maori Studies at Victoria University, Wellington, New Zealand between 1967 and 1996. He published widely on Maori sociology, politics, art and religion.
+
+**References**
+
+- Dark, Philip J.C. 1990. *Tomorrow’s Heritage is Today’s Art, and Yesteryear’s Identity*. In Hanson, Allan and Louise Hanson (eds), *Art and Identity in Oceania*. Bathurst: Crawford House Press, pp. 244–268.  
+- Kernot, Bernie, 1984. *Tonga* (unpublished field notes). Te Papa File.  
+- (Anonymous) 1980. *Tongan Handicrafts*. Canberra: Australian Government Publishing Service.
diff --git a/container/site/content/posts/pistachio-shortbread-cookie/index.md b/container/site/content/posts/pistachio-shortbread-cookie/index.md
new file mode 100644
index 0000000..7ace151
--- /dev/null
+++ b/container/site/content/posts/pistachio-shortbread-cookie/index.md
@@ -0,0 +1,26 @@
++++
+categories = ["food"]
+tags = ["cookie"]
+date = 2025-03-21T10:28:00-06:00
+description = ""
+draft = false
+slug = "pistachio-shortbread-cookie"
+title = "🍪 Pistachio Shortbread Cookie"
+author = "nicholas"
++++
+
+This is stupid easy recipe Bailey made. 
+
+| ingredient      | %      |
+| --------------- | ------ |
+| flour, 11.6%    | 100%   |
+| butter          | 79.00% |
+| pistachio nuts  | 46.00% |
+| sugar           | 37.00% |
+| salt            | 2.10%  |
+| vanilla extract | 0.88%  |
+| almond extract  | 0.88%  |
+
+Note: The units for all weights are in grams.
+
+{{< gallerynew name="pistachio-shortbread-cookie-gallery" >}}
diff --git a/container/site/content/posts/pistachio-shortbread-cookie/pistachio-shortbread-cookie-gallery.yaml b/container/site/content/posts/pistachio-shortbread-cookie/pistachio-shortbread-cookie-gallery.yaml
new file mode 100644
index 0000000..72635c1
--- /dev/null
+++ b/container/site/content/posts/pistachio-shortbread-cookie/pistachio-shortbread-cookie-gallery.yaml
@@ -0,0 +1,25 @@
+images:
+  - src: "images/butter-cubed.JPG"
+    alt: "Cubed pieces of butter"
+    caption: "Cubed butter"
+  - src: "images/pistachio-cookie-baked.JPG"
+    alt: "Baked pistachio cookie"
+    caption: "Baked cookie"
+  - src: "images/pistachio-cookie-cut.JPG"
+    alt: "Sliced pistachio cookie dough"
+    caption: "Cut cookie dough"
+  - src: "images/pistachio-cookie-dough.JPG"
+    alt: "Prepared pistachio cookie dough"
+    caption: "Cookie dough"
+  - src: "images/pistachio-cookie-oven.JPG"
+    alt: "Cookies baking in the oven"
+    caption: "Cookies in oven"
+  - src: "images/pistachio-cookie-prebake.JPG"
+    alt: "Unbaked pistachio cookies on tray"
+    caption: "Cookies ready to bake"
+  - src: "images/pistachio-dry-mix.JPG"
+    alt: "Dry ingredients for pistachio cookies"
+    caption: "Dry mix"
+  - src: "images/process-dough-butter.JPG"
+    alt: "Mixing butter into dough"
+    caption: "Combining butter and dough"
diff --git a/container/site/content/posts/pita/index.md b/container/site/content/posts/pita/index.md
new file mode 100644
index 0000000..7c7d7d9
--- /dev/null
+++ b/container/site/content/posts/pita/index.md
@@ -0,0 +1,61 @@
++++
+categories = ["food"]
+date = 2024-04-30T17:17:58Z
+description = ""
+draft = false
+slug = "pita"
+title = "🥙 Pita"
+author = "nicholas"
++++
+
+This is not traditional or authentic pita I made this bread to be strong, pliable, and soft so I can stuff it with fillings or deep fry it to use it as a chalupa shell. During the baking process the disc should formed a void or a pocket that can be filled. Pita is baked at 500° F on a thick 3/8" A36 steel plate then wrapped, and finally frozen after cooling to ~90° F. Like most bread products, these thaw / reheat with no discernable loss in quality. After baking, they should be used right away because they become dry quickly. If they are to be frozen and later stuffed, is not recommended to stack them. The layers will compress and stick together under the weight and make it impossible to separate after a freeze / thaw cycle.
+
+{{< video
+  src="videos/pita-baking-timelapse.webm"
+  width="100%" >}}
+
+{{< gallerynew name="pita-gallery" >}}
+
+## Process
+### 1. Preheat Steel Plate
+- Pre-heat the steel plate for approximately **45 minutes** prior to the Bake step.
+
+### 2. Mix Ingredients
+- **Combine dry ingredients.**
+- **Combine liquid ingredients** (except oil).
+- Add the liquid mixture to the mixer.
+- Gradually add dry ingredients to the mixer.
+- **Mix** until the liquid is fully absorbed.
+- Add **oil** to the mixer.
+- **Mix** for approximately **10 minutes**.
+- Allow dough to rest in the mixer for **10 minutes**.  
+  *This allows the dough to become less sticky on the surface, likely due to some water evaporating or absorbing into the dough, aiding in extraction.*
+
+### 3. Divide & Scale
+- Divide and scale the dough into portions weighing roughly **180 grams** (as used in the photos below).
+- Shape the portions into **balls**.
+- Two options at this stage:
+  - **Refrigerate** the dough for later use.
+  - **Proceed** to the next step — Shape.
+
+### 4. Shape
+- If the dough has been refrigerated:
+  - **Separate** the dough balls and **reshape** them into spheroids.
+  - Allow them to **warm** slightly to make rolling easier.
+  
+- **Dust** the surface of each ball with flour.
+- **Roll out** the dough into a **disc** approximately **7" in diameter**.
+  
+- Let the discs **rest** on parchment paper for **10 minutes**.  
+  *This helps create a "skin" on the dough surface, essential for producing a void during baking.*
+
+### 5. Bake
+- Ensure the steel plate and the oven are both preheated to **500° F**.
+- Open the oven, **launch** the parchment paper with dough into the oven, and **shut** the oven immediately.
+- Retrieve the pita once they have **fully inflated**.
+
+### 6. Cool
+- Place each pita on a **cooling rack** and let them cool until they reach a temperature below **90° F**. This typically happens within minutes.
+- **Use immediately**, or wrap/seal the pita in a container to preserve softness.
+- **Optionally** freeze indefinitely.
+ * Rest
diff --git a/container/site/content/posts/pita/pita-gallery.yaml b/container/site/content/posts/pita/pita-gallery.yaml
new file mode 100644
index 0000000..47f787b
--- /dev/null
+++ b/container/site/content/posts/pita/pita-gallery.yaml
@@ -0,0 +1,28 @@
+images:
+  - src: "images/pita-fridge-proof.JPG"
+    alt: "Pita dough proofing in the fridge"
+    caption: "Fridge proofing"
+  - src: "images/pita-launch-prep.JPG"
+    alt: "Preparing to launch pita into oven"
+    caption: "Prepping for bake"
+  - src: "images/pita-partially-inflated.JPG"
+    alt: "Partially inflated pita in oven"
+    caption: "Pita partially puffed"
+  - src: "images/pita-roll-flat.JPG"
+    alt: "Rolling pita dough flat"
+    caption: "Rolling dough"
+  - src: "images/pita-cooling-rack.JPG"
+    alt: "Baked pita cooling on a rack"
+    caption: "Cooling baked pita"
+  - src: "images/pita-fully-inflated.JPG"
+    alt: "Fully inflated pita in oven"
+    caption: "Pita fully puffed"
+  - src: "images/pita-launch.JPG"
+    alt: "Launching pita into hot oven"
+    caption: "Pita going in oven"
+  - src: "images/pita-pocket-filled.jpg"
+    alt: "Pita pocket filled with ingredients"
+    caption: "Filled pita pocket"
+  - src: "images/pita-shaped.JPG"
+    alt: "Shaped pita dough rounds"
+    caption: "Shaped dough"
diff --git a/container/site/content/posts/pretzel-nuggets/index.md b/container/site/content/posts/pretzel-nuggets/index.md
new file mode 100644
index 0000000..77ac4ff
--- /dev/null
+++ b/container/site/content/posts/pretzel-nuggets/index.md
@@ -0,0 +1,137 @@
++++
+categories = ["food"]
+tags = ["reverse-engineer","pretzel"]
+date = 2024-12-26T12:00:00Z
+description = ""
+draft = false
+slug = "auntie-annes-pretzel-nuggets"
+title = "🥨 Auntie Anne's Pretzel Nuggets"
+author = "nicholas"
++++
+
+I am trying to reverse-engineer Auntie Anne's Original Pretzel Nuggets. I will use lye instead of baking soda for my alkaline bath for a deeper brown and classic pretzel taste.
+
+
+{{< image 
+    src="images/pretzel-nuggets-baked.jpg" 
+    caption="Baked pretzel nuggets" >}}
+{{< image 
+    src="images/pretzel-nuggets-salted.JPG" 
+    caption="Pretzel nuggets - salted" >}}
+{{< image 
+    src="images/pretzel-nuggets-cinnamon-sugar.JPG" 
+    caption="Pretzel nuggets - cinnamon" >}}
+
+
+## Reference Material
+I am not given an ingredient list on the official *Auntie Anne's Pretzels* website, but I am given something like a nutrition label for each of their products, which includes the total weight of the product. Since it is a simple bread product, the number of possible ingredients that form the nuggets is very limited, making the missing ingredient list almost unnecessary. I will be able to make good enough guesses and estimates.
+
+### Original Pretzel
+{{< image 
+    src="images/original-pretzel.PNG" 
+    caption="Original Pretzel" >}}
+{{< image 
+    src="images/original-pretzel-nutrition.PNG" 
+    caption="Original Pretzel nutrition" >}}
+{{< image 
+    src="images/original-pretzel-nutrition-detailed.PNG" 
+    caption="Original Pretzel detailed nutrition" >}}
+
+Here is the same table formatted for markdown:
+
+| Serving Size                   | Calories | Fat (g) | Saturated Fat (g) | Trans Fat (g) | Cholesterol (mg) | Sodium (mg) | Carbohydrate (g) | Fiber (g) | Total Sugars (g) | Added Sugars (g) | Protein (g) |
+| ------------------------------ | -------- | ------- | ----------------- | ------------- | ---------------- | ----------- | ---------------- | --------- | ---------------- | ---------------- | ----------- |
+| Original Pretzel 1 each (125g) | 340      | 5       | 3.0               | 0.00          | 15               | 870         | 65               | 2         | 9                | 8                | 8           |
+
+### Pretzel Nugget 
+{{< image 
+    src="images/bucket-of-nuggets.PNG" 
+    caption="Bucket of Nuggets" >}}
+{{< image 
+    src="images/bucket-of-nuggets-nutrition.PNG" 
+    caption="Bucket of Nuggets nutrition" >}}
+{{< image 
+    src="images/nuggets-nutrition-detailed.PNG" 
+    caption="Bucket of Nuggets detailed nutrition" >}}
+Again, recreated using markdown table:
+
+| Serving Size             | Calories | Fat (g) | Saturated Fat (g) | Trans Fat (g) | Cholesterol (mg) | Sodium (mg) | Carbohydrate (g) | Fiber (g) | Total Sugars (g) | Added Sugars (g) | Protein (g) |
+| ------------------------ | -------- | ------- | ----------------- | ------------- | ---------------- | ----------- | ---------------- | --------- | ---------------- | ---------------- | ----------- |
+| Original Nuggets (206 g) | 580      | 12      | 7.0               | 0.00          | 30               | 1450        | 105              | 3         | 14               | 14               | 13          |
+
+
+## Calculations and Assumptions
+I base all of my calculations on the values in the _Original Pretzel_ table.
+### Dough fat
+My first assumption is that very little if any fat is included in the dough, since Auntie Anne's brushes the nuggets with butter after baking. The value given for the amount of fat per one original pretzel is 5 grams, and it is easy to imagine this is the average amount of butter that ends up sticking to the pretzel when dipped. I discount the 5 g fat from the total weight of the pretzel since I am only interested in creating the dough. My dough will contain no fat.
+
+### Sugar
+This will probably be granulated sugar. The given value of added sugar directly tells me the total weight in the product: It is $6 / 120$ or $5$% of the total weight of the finished product.
+
+### Protein
+Protein content is most likely to be entirely provided by the protein found in wheat flour. Flour can have varying protein content across different types, but I start with the assumption that the flour contains ~ $11$% protein. I use this to calculate about how much flour is present in the dough.
+$8 \div 0.11 = 73$. 
+
+## Verifying
+At first glance, everything seems about right, but I should check. Here I verify that the calculated flour weight and the sugar weight match the given carbohydrate value $65$. While I am at it, I may as well verify that I am close to the calories value as well. The tables below shows these calculations. I end up with almost exactly the same macronutrients as given in Auntie Anne's Original Pretzel. Close enough.
+
+| Ingredient                       | Kcal / g | Carbohydrate | Protein | Added Sugar | Fat  |
+| -------------------------------- | -------- | ------------ | ------- | ----------- | ---- |
+| All Purpose Bleached Wheat Flour | 3.67     | 0.77         | 0.11    | -           | -    |
+| Granulated Sugar                 | 4.00     | 1.00         | -       | 1.00        | -    |
+| Fat                              | 9.00     | -            | -       | -           | 1.00 |
+
+| Ingredient                       | Amount (g) | Calculated Carbohydrates | Calculated Kcal        |
+| -------------------------------- | ---------- | ------------------------ | ---------------------- |
+| All Purpose Bleached Wheat Flour | 73         | $0.77 \times 73 = 56$    | $73 \times 3.67 = 268$ |
+| Granulated Sugar                 | 8          | $1\times 8 = 8$          | $8 \times 4 = 32$      |
+| Fat                              | 8          | -                        | $5 \times 9 = 45$      |
+| _TOTAL_                          | 89         | $56 + 8 = 64$            | $268 + 32 + 45 = 345$  |
+
+
+All of the nutritionally significant ingredients I care about are now solved for. I make some assumptions about IDY and salt. Auntie Anne's allows their dough to rise for 30 min. or so. I do not care really. I use 2% yeast and 2% salt (baker's %), which are typical usage levels for most bread products. The last item to calculate is water. To get close, all I need to do is subtract the calculated values from $120$.
+$120 - flour - sugar - fat - salt - yeast = 39$
+ $120 - 73 - 8 - 5 - 1.5 - 1.5 = 36$
+This calculation indicates a very low hydration level of 48%. However, it is likely that this is because the final product weight will obviously not account for moisture loss that occurs throughout the process of baking and cooling. This can be around 10% total. Assuming this is true, I must increase the water weight by 10% (close enough) to arrive at the weight of water that was originally present in the dough before moisture loss. This gives me a much more reasonable hydration level of 55%. Perfect.
+
+## Formulation
+Using the table above, I am able to create a spreadsheet to calculate values for a batch of pretzel dough. All I need to do is convert the percentage-based formula to a baker's percentage-based formula:
+| ingredient          | baker's % | weight (g) |
+| ------------------- | --------- | ---------- |
+| Bread flour (12.7%) | 100.00%   | 600        |
+| water               | 55.00%    | 330        |
+| IDY                 | 2%        | 12         |
+| salt                | 2%        | 12         |
+| sugar               | 11%       | 66         |
+| TOTAL               |           | 1050       |
+
+## Process
+Any time I try to recreate a sort of industrial process in a home kitchen, I consider whether there might be a more sensible home kitchen-friendly process. When researching how I might process the dough into nuggets, I come across several different methods, some of which I tested, others of which I reasoned were not worth testing on the basis of my failures during other testing procedures. One important factor that varies between procedures is the order of shaping, proofing, and water bath. Some recipes would have me first shape the dough into nuggets, proof, dip, bake. Others: shape into ropes, proof, shape into nuggets, dip. I am nearing the end of the list of sensible order permutations, so one will understand the point I am making: there are many ways is theory to make pretzel nuggets.
+
+After several trials, I conclude that Auntie Anne's has the best procedure. It is by far the most time-efficient and simplest. It works great. It seems counterproductive in retrospect not to start with their own procedure, but the process of eliminating other procedures taught me a lot about why Auntie Anne's does it the way they do, and gives me confidence that this way is the better way. Anyway, Auntie Anne's process, which I have modified for my own kitchen / tools, etc. goes something like this:
+
+1. whisk together dry ingredients
+2. add water to mixer
+3. add dry ingredients to mixer
+4. mix for 8 min.
+5. press dough into 13 x 9 pan (to shape uniformly),
+6. turn out onto parchment lined cutting board, cover
+7. proof 30" @ 70 F
+8.  using pizza cutter, cut into 9" long strips less than an inch wide (4 halvings)
+9.  dunk in alkaline bath for ~10 sec.
+10. drain on wire mesh 10 sec.
+11. transfer to parchment lined sheet pan
+12. during handling, allow dough to elongate to fill out most of the length of a 1/2 size sheet pan (~16")
+13. sprinkle with kosher or flaky salt
+14. cut into 1" pieces with a pizza cutter
+15. bake 8 min. @ 500 F
+16. separate
+17. toss with melted butter
+
+## Mistakes to avoid
+#### Grease dough
+Greasing the dough will result in streaky, blotchy surface finish. The fat coats the surface of the dough and allows the alkaline bath to unevenly penetrate to the surface. Or something like this. I do not know exactly why but it is a good guess.
+#### Use high hydration dough
+Dough is too elastic at 60% hydration. 55% is good.
+#### Shape before proof
+Once again I do not know exactly how to explain this. I tried to shape dough into a rope, proof, then dip. This caused my dough to rip apart like wet tissue paper.
diff --git a/container/site/content/posts/proxmox/images/clonezilla_restore.PNG b/container/site/content/posts/proxmox/images/clonezilla_restore.PNG
new file mode 100644
index 0000000..80ada48
--- /dev/null
+++ b/container/site/content/posts/proxmox/images/clonezilla_restore.PNG
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:1c8f6b5825beeeded1b401f445b08f2ad851f5d008cc7074f98bd83d9d6f03d2
+size 86964
diff --git a/container/site/content/posts/proxmox/images/clonezilla_usb.PNG b/container/site/content/posts/proxmox/images/clonezilla_usb.PNG
new file mode 100644
index 0000000..6f11a6c
--- /dev/null
+++ b/container/site/content/posts/proxmox/images/clonezilla_usb.PNG
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:6759c2ea1cfe29f2062898695513dc256f68cd88663152cad9c372b04954b508
+size 54830
diff --git a/container/site/content/posts/proxmox/images/gparted_shrink.PNG b/container/site/content/posts/proxmox/images/gparted_shrink.PNG
new file mode 100644
index 0000000..2e19b6d
--- /dev/null
+++ b/container/site/content/posts/proxmox/images/gparted_shrink.PNG
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:6cedac469c92da2dd16f5d6a522f08b4c741ba3ba5cc788290869edb88174ecc
+size 377014
diff --git a/container/site/content/posts/proxmox/index.md b/container/site/content/posts/proxmox/index.md
new file mode 100644
index 0000000..a8c8591
--- /dev/null
+++ b/container/site/content/posts/proxmox/index.md
@@ -0,0 +1,78 @@
++++
+categories = ["software"]
+tags = ["virtualization"]
+date = 2024-11-10T15:55:42Z
+description = ""
+draft = false
+slug = "proxmox-migration"
+title = "🤖 Server Virtualization Migration"
+author = "nicholas"
++++
+
+I want to run Windows Server for the purpose of running a **domain controller** for **Active Directory**. My server is currently running Debian Linux, so some work will need to be done to get this OS virtualized alongside Windows Server, and I will accomplish this with Proxmox Virtual Environment.
+
+## Physical-to-Virtual (P2V) Migration
+The operation I will be doing is called *physical-to-virtual migration*. I outline the process below.
+- **Shrink OS partition**
+  - Create a bootable USB containing *gparted* software.
+  - Boot into gparted software so that I can shrink my OS partition. This is necessary because the OS partition, despite containing only around 40 GB of data, occupies roughly the total physical space on the disk, or 500 GB, and this very same disk will later be used to host the Virtualization OS.
+- **Clone OS disk**
+  - Create bootable USB containing CloneZilla software
+  - Boot into CloneZilla software to clone my physical, now-shrunken OS partition.
+- **Install Proxmox** 
+  - I will need to install Proxmox on the physical disk. This will erase the OS, but since I made a clone, I can eventually restore this OS to a virtual disk within Proxmox.
+  - Proxmox provides a software layer to install virtual disks that contain my cloned OS, and other OSes.
+- **Reconfigure Storage**
+  - Previously, my ZFS ran on *bare-metal*, and I can still do this again inside Proxmox.
+  - I need only ZFS import
+
+### Shrinking the Partition
+This part is sort of tricky. As I described above, I have to install Proxmox on the same physical storage drive that I am migrating from. This means that I will need to shrink the partition that contains my Linux OS so that it may fit on the virtual drive I allocate for the virtualized clone. The sum total of partitions on the drive is 500 GB, so the CloneZilla restore would require a disk equal to or larger than 500 GB. It is not possible for me to create a 500 GB virtual disk on a 500 GB physical disk, so I must shrink the OS partition down to a size that *will* fit on the virtual disk. For this I will use *gparted*. I could do this with tools built into CloneZilla, but gparted offers a very nice GUI and it is reassuring to have a live gparted USB around in case my migration goes wrong. I use *rufus* to configure a USB drive that will allow me to boot my computer into a live environment of gparted. This will allow me to make changes to the partition on the OS disk:
+
+1. **Boot**
+2. **Swap**
+3. **OS**
+
+I am interested in shrinking the **OS** partition, which occupies 400+ GB of space on the disk, and containing only ~40 GB of data. This is approximately the size to which I may shrink the partition. Once it is cloned into a virtual disk, I can expand it to fill whatever partition size I allocate. I will allocate approximately 100 GB to Proxmox for the root filesystem. The remaining ~400 GB will be managed by Proxmox's Logical Volume Manager, which will allow me to provision space for the virtual disks that will host the guest VM OSes such as Windows Server, or Windows 11, or Debian, or whatever.
+
+{{< image 
+    src="images/gparted_shrink.PNG" 
+    caption="gparted shrink" >}}
+
+### CloneZilla Live Environment (BACKUP)
+I boot to CloneZilla live environment to clone the now-shrunken partitions that compose the original Linux OS disk. Now that the sum of my three partitions is ~40 GB (instead of 400+ GB), it is time to clone them. Again I use Rufus to create a boot environment for CloneZilla Live software. This allows me to boot my server into the CloneZilla Live environment to carry out the disk cloning operation on the OS disk. A useful but perhaps misleading feature of CloneZilla is that it saves and restores only used blocks on the hard disk partitions. Suppose I had not resized the OS root partition down from ~400 GB, and the OS still occupied only 40 GB of that space. If I backup this disk, CloneZilla will indeed save only used blocks on this partition, making the backup directory ~40 GB. This does *not* mean that the disk that the backup is intended to be restored to may be smaller than the original sum of the partitions -- only that the space required to store backup will be relatively small. The disk being restored *to* would need to be at least 400 GB, despite the backup only being 40 GB. This is why I shrank down the partitions in the first place.
+
+{{< image 
+    src="images/clonezilla_usb.PNG" 
+    caption="Creating bootable CloneZilla USB in Rufus" >}}
+
+#### Cloning
+In CloneZilla, I allow the GUI to hand-hold me through the process of creating a backup. This backup is cloned to an external hard drive. When it is time to restore the OS to a VM disk, I will use CloneZilla to do a disk-to-disk backup -- one physical disk (external hard drive) and one virtual (Proxmox virtual hard drive). Once the backup is complete and stored off the OS disk, it is time to install Proxmox at on root filesystem.
+
+### Proxmox VE
+Once again I create a live boot environment on a USB drive to allow me to boot into and install Proxmox VE. The GUI guides me through the installation and results in a web interface published on the local machine's port `8006`. This is where I can configure the system: allocating space on the disk for virtual disks, managing ZFS pool, etc.
+
+### CloneZilla Live Environment (RESTORE)
+
+{{< image 
+    src="images/clonezilla_restore.PNG" 
+    caption="CloneZilla Restore" >}}
+
+Now that I have a working Proxmox host, it is time to create a VM to restore the backup to.
+- First, I create a new VM which will eventually host a virtual drive that will boot into my cloned Debian Linux environment. Before I realize this I need to configure the VM to boot into CloneZilla and read the backup from the external hard drive. 
+- I name the new VM `debian` and add a USB device, and a CD/DVD drive to the hardware. 
+- Next I move a CloneZilla live environment ISO to `/var/lib/vz/template/iso`. 
+- I mount this to the VM CD/DVD drive and configure the VM to use it as the boot device. 
+- Now I run the VM and boot into CloneZilla. 
+- I need to mount the external hard drive, so I enter a terminal.
+
+```shell
+mkdir /mnt/hdd
+mount /dev/sda /mnt/hdd
+```
+Now I can use clonezilla to restore my OS to a virtual disk.
+
+### Expand OS Root Partition
+I shrank it to 40 GB, now i need to fill up the virtual disk. I attach the gparted disk to the VM and boot to it. This time I expand the partition to occupy the remaining used portion of the virtual disk. 
+
+Done.
\ No newline at end of file
diff --git a/container/site/content/posts/queso-blanco/index.md b/container/site/content/posts/queso-blanco/index.md
new file mode 100644
index 0000000..c671f55
--- /dev/null
+++ b/container/site/content/posts/queso-blanco/index.md
@@ -0,0 +1,77 @@
++++
+categories = ["food"]
+tags = ["reverse-engineer","chipotle"]
+date = 2024-12-06T15:36:00Z
+description = ""
+draft = false
+slug = "queso-blanco"
+title = "🧀 Chipotle Queso Blanco"
+author = "nicholas"
++++
+
+The purpose of creating this cheese sauce is to cheaply mimic the some features of Chipotle's cheese sauce so that I can add it to freezer burrito bowls. It is meant to have a very thin and fluid consistency that will give moisture to offset the dryer ingredients such as beans and rice.
+
+This log entry is not meant to recreate _exactly_ Chipotle's Queso Blanco. It is to create something that shares its desirable features and to make the preparation straightforward and fail-safe. And to learn more about making cheese sauces.
+
+## Nutrition
+The first place to start is the nutrition information for the food product. The Chipotle website provides nutrition info for each of their menu items, including the _Queso Blanco_. I am able to find the nutrition facts for different portions: entrée, side, and large. I choose to base my calculations on the *large* portion because choosing the largest available portion size will minimize errors introduced by the FDA rules regarding rounding. For example, if a product serving size contains 50 calories or less, the value is to be rounded to the nearest 5-calorie increment (e.g., 47 → 45, 52 → 50). Otherwise they are to be rounded to the nearest 10-calorie increment (e.g., 154 → 150, 156 → 160). It is unlikely any of this will have an important effect, but is seems to be the better option.
+
+| Portion | Calories | Calories From Fat | Total Fat (g) | Saturated Fats (g) | Trans Fat (g) | Cholesterol (mg) | Sodium (mg) | Carbohydrates (g) | Dietary Fiber (g) | Sugar (g) | Protein (g) |
+| ------- | -------- | ----------------- | ------------- | ------------------ | ------------- | ---------------- | ----------- | ----------------- | ----------------- | --------- | ----------- |
+| 8 oz    | 480      | 330               | 37            | 23                 | 1.5           | 120              | 980         | 14                | <1                | 5         | 20          |
+
+
+## Ingredients
+The next critical piece of data -- the ingredient list -- is also supplied by the website. 
+| Ingredient           |
+| -------------------- |
+| White Cheddar Cheese |
+| Monterey Jack Cheese |
+| Farm Fresh Dairy     |
+| Cultured Cream       |
+| Serrano Peppers      |
+| Poblano Peppers      |
+| Chipotle Peppers     |
+| Tomatoes             |
+| Yellow Onion         |
+| Garlic               |
+| Cornstarch           |
+| Salt                 |
+| Water                |
+
+{{< image 
+    src="images/queso-blanco-ingredients.PNG" 
+    caption="Queso Blanco ingredient list" >}}
+
+I had not fully realized just how committed Chipotle is to being a "clean label" food until I started to see their marketing material on the ingredient pages of their website. They have gone so far as to create their entire menu using  just 53 different ingredients. This would seem to offer hope that reverse engineering it and preparing it will be easy work, and indeed this is true in a sense, but in the case of an emulsified cheese mixture an ultimately mistaken notion. Chipotle's marketing even gestures at the same idea:
+>Real is better. Better for You, Better for People, Better for Our Planet. It may be the hard way to do things, but it’s the right way.
+
+Now, I cannot speak for anyone else, but I cannot agree or disagree with this. It is part of the art of forming a platitudinous brand statement. There is nothing _there_. 
+
+But to return to the point, the thinking goes: making a cheese sauce using the same ingredients as Chipotle is easy. Simply combine them all in a saucepot and heat until the cheese melts. Simple as. But it will not be _good_. Making a _good_ cheese sauce with the same set of simple ingredients is actually a tricky thing. The cornstarch must gelatinize, which requires it be heated to at least 203 degrees F. Insufficient gelatinization will result in a gritty texture. And the emulsion that constitutes the monterrey jack and cheddar cheese must not break, and it will at these high temperatures. The sour cream will curdle under these conditions too, forming ugly little lumps. All of these issues and more like them _can_ be overcome -- obviously. Chipotle has managed it and almost anyone can too, but I remind myself of what I am trying to do here. I am not trying to atom-for-atom clone Queso Blanco from Chipotle at any cost. I am doing this for fun -- to learn more about why food manufacturers do what they do, how they do it, and most importantly how to **make my own food taste as good as theirs**. Just because I _can_ does not mean I _should_. And why should I make it more difficult for myself when something like **sodium citrate** exists, for example. 
+
+## Shortcuts
+There are many shortcuts and cost-cutting measures that are available to me. In the context of cheese sauces, this becomes very obvious when reading through the ingredient lists of just about any supermarket cheese sauce -- they rarely look anything like Chipotle's Queso Blanco. They take a lot of shortcuts, use a lot of "artificial ingredients", and they still taste very good! For example, in place of using large amounts of actual cheese -- which is, at least as far as our palates and finances are concerned, a relatively expensive mixture of fat, protein, and a cheese flavor -- these products contain things like soybean oil, whey protein concentrate, and nonfat dry milk. This is good news for me. It gives me a lot of flexibility in creating my own cheese sauce solution that balances the factors I care about. As always, I want the preparation of the food item to be practical. I want it to taste good, and I want it to be cheaper than buying it from a supermarket. I will try to use aspects of two different strategies -- cost-cutting profit-maxxing and shelf-life-maxxing strategies of global food brands, and the practical, simple, clean-label, home cook-friendly ingredient lists of brands like Chipotle -- to create my own cheese sauce.
+
+### Sodium Citrate
+Chipotle backed themselves into a corner -- they can't use artificial ingredients for fear of losing their clean label credibility. I do not worry about such things. Sodium citrate will allow me to mistreat my cheese sauce to a degree that would simply ruin Chipotle's cheese sauce ten times over. This is the real value add. I can go fast. Heat, reheat, overmix, whatever -- I can do everything wrong to this sauce and the emulsion is unlikely to break. No grittiness, no lumps. This works because sodium citrate slightly reduces the acidity of the cheese sauce, which makes the proteins more soluble and well-distributed. This is how I avoid clumping. Also, Sodium citrate binds to the calcium ions that hold the protein molecules together in a tight network. With fewer ions binding proteins together, the network loosens which results in a cheese that is easier to melt and emulsify.
+
+### Cheese Mix
+The foundation upon which I build the recipe is the cheese mixture. Per Chipotle's own ingredient list, the Queso Blanco uses both Monterey Jack and Sharp White Cheddar. I cannot derive relative amounts from what is given on paper. It occurs to me that since pepper jack cheese is essentially monterey jack with the addition of peppers, it may be sensible to use this instead of monterey jack. The product will have all the desirable melting and consistency properties as Monterey jack, but comes already seasoned with well-balanced proportion of jalapeno peppers. The only thing I will need to do is add chipotle pepper to compensate for the cheese being diluted with water, milk, etc, and to add the signature Chipotle flavor. This will simplify the process a great deal.
+
+### Farm Fresh Dairy
+This seems to simply be milk or cream, transfigured by an emotive conjugation into a bucolic wholesome beverage suited for hobbits. I will not be using "farm fresh dairy" but instead milk powder dissolved in water, and maybe some oil. I name this mixture "natural and healthy good milk that is clean and good for your body". I use milk powder because my milk consumption cannot keep pace with the rate at which the milk deteriorates into undrinkably sour curdled toxic sludge. My guess that this "farm fresh dairy" is actually just cream is because I am failing imaging what else it could be. The sour cream and cheese dairy products are already present, so it must not be those. It must be some sort of milk product. Also, there needs to be some proteins and fats available when the dairy emulsions (cheese, sour cream) are melted into the mixture. Water alone does not contain proteins, so there is nothing for the other proteins to bind to but themselves, and there is already just enough to sustain their own emulsions. The dairy products would disperse and form clumps. Milk has lots of protein to allow cheese to form emulsion with cheese and cream.
+
+### Cultured Cream
+A quick peek at the ingredient list for Chipotle's Sour Cream reveals that it is made of one ingredient: cultured cream. Therefore I reason that the reverse is also true -- Chipotle's cultured cream is sour cream. This is mostly water and some fat, and protein to hold it all together. This ingredient is unlikely to be important in creating a good cheese sauce. I do not know why Chipotle includes it. Maybe to add a different kind of tangy sourness to the sauce, which would once again reflect the decision to exclude "artificial" ingredients. This is because it is common for jarred cheese sauces to include instead things like lactic acid and vinegar. I suspect I can simplify by excluding this ingredient and substituting with something that does not spoil as quickly as sour cream.
+
+### Seasonings and Additions (Tomatoes, Garlic, Onion, Peppers)
+There are a few other ingredients listed that I will not bother with now. The the aim is to create a base cheese sauce to build on. The effect these inclusions have on the nutrition numbers are minimal, so they can be added later and not change much.
+
+## Spreadsheet Math
+The formulation will come down to several factors that I care about.
+
+1. Consistency -- This will be about how much water is included. Chipotle has 480 calories for every 8 oz. portion of Queso Blanco. Basically if I begin with a weight of 8 oz and subtract the weight of cheese that amounts to 480 calories, and add the remaining weight in water, I should have a similar consistency after thickening.
+
+The game I need to play here is to fiddle with the proportions of cheese, sour cream, milk, and water until I achieve a macronutrient makeup similar to Chipotle's. In other words, the constraints are basically the nutrition table above. There is a small enough range of possible values of these proportions that I can get pretty close without resorting to linear algebra. The mixture must thin and therefore contain a lot of water.
+
diff --git a/container/site/content/posts/react-app-resurrection/index.md b/container/site/content/posts/react-app-resurrection/index.md
new file mode 100644
index 0000000..c92882d
--- /dev/null
+++ b/container/site/content/posts/react-app-resurrection/index.md
@@ -0,0 +1,239 @@
++++
+categories = ["software"]
+tags = ["react","typescript","javascript"]
+date = 2025-04-12T00:00:00-06:00
+description = ""
+draft = false
+slug = "react-app-resurrection"
+title = "⚛️ React App Resurrection"
+author = "nicholas"
++++
+
+[Project git repo](https://git.uuard.com/nicholas/storage-manager)
+
+A few years ago the company I work for explored the idea of rewriting older **ASP.NET** and **Backbone.js** features in a more modern web framework. Between the two contenders, **React** and **Vue**, the development team was leaning toward Vue. Each developer went off and built a small feature or two using Vue to get a sense for it before we eventually committed to rewriting with it. I raised no objections to the decision because it did not matter to me, and I like Vue just fine. 
+
+Eventually, though, I wanted to try building something with React, so I contrived the simplest possible project that would force me to understand at the very least the fundamentals of React. This is why I created this in the first place.
+
+The app is a simple CRUD app that manages *boxes*, which can contain *items*. I rewrite the app with TypeScript and clean it up a little bit.
+
+## Technology Stack
+I am using the **MERN** tech stack:
+
+- **M**ongoDB (Database)
+- **E**xpress.js (Backend framework)
+- **R**eact (Frontend framework)
+- **N**ode.js (Backend runtime)
+
+There are a couple main goals I want to accomplish:
+1. Get the app working
+2. Upgrade to **Vite** from **Create React App**
+3. Update Packages
+4. Typescript rewrite, refactor using *better* practices
+
+## 1. Get the App Working
+The first thing I will do is get the **database** working. This is straightforward minus a small hiccup: my server runs on an *Intel Pentium Gold G5400*, and **MongoDB versions 5+ cannot run without the AVX instruction set extension**, which is regrettably absent in the spec sheet.
+
+{{< image 
+    src="images/pentium-gold-g5400-instruction-set-extensions.jpg" 
+    caption="Pentium Gold G5400 Instruction Set Extensions - AVX missing" >}}
+
+So I will use a very old version of mongodb (`mongo:4.4.6`) to get the app working.
+
+Here is my `compose.yml` file. The container also includes Mongo Express which will allow me to manage my databases with a web interface rather than manage it through the command line. The environment variables are stored in `.env` file.
+
+**compose.yml**
+```yaml
+services:
+  mongo:
+    container_name: mongo-db
+    image: mongo:4.4.6
+    networks:
+      - mongo-network
+    restart: always
+    environment:
+      MONGO_INITDB_ROOT_USERNAME: ${MONGO_INITDB_ROOT_USERNAME}
+      MONGO_INITDB_ROOT_PASSWORD: ${MONGO_INITDB_ROOT_PASSWORD}
+    ports:
+      - 27017:27017
+
+  mongo-express:
+    container_name: mongo-express
+    image: mongo-express
+    networks:
+      - mongo-network
+    restart: always
+    ports:
+      - 8999:8081
+    environment:
+      ME_CONFIG_MONGODB_ADMINUSERNAME: ${ME_CONFIG_MONGODB_ADMINUSERNAME}
+      ME_CONFIG_MONGODB_ADMINPASSWORD: ${ME_CONFIG_MONGODB_ADMINPASSWORD}
+      ME_CONFIG_MONGODB_URL: mongodb://${MONGO_INITDB_ROOT_USERNAME}:${MONGO_INITDB_ROOT_PASSWORD}@mongo:27017/
+      ME_CONFIG_BASICAUTH: false
+
+networks:
+  mongo-network:
+    name: mongo-network
+```
+
+**.env**
+```env
+MONGO_INITDB_ROOT_USERNAME=root
+MONGO_INITDB_ROOT_PASSWORD=<password>
+ME_CONFIG_MONGODB_ADMINUSERNAME=admin
+ME_CONFIG_MONGODB_ADMINPASSWORD=<password>
+```
+`docker compose up -d`
+
+This will start the Mongo DB and Mongo Express.
+
+---
+
+Next I need to edit the `server.js` connection string to match the credentials, port, and host:
+
+```javascript
+require('dotenv').config();
+
+const DB_HOST = 'server';
+const DB_PORT = 27017;
+const DB_USERNAME =process.env.DB_USERNAME;
+const DB_PASSWORD = process.env.DB_PASSWORD;
+
+const connectionString = `mongodb://${DB_USERNAME}:${DB_PASSWORD}@${DB_HOST}:${DB_PORT}?authMechanism=DEFAULT`;
+```
+Once again, I am using a `.env` file to keep the username and password secret.
+
+Now I start the **server** and the **client** with `npm run start`.
+
+{{< image 
+    src="images/server-db-connection-success.jpg" 
+    caption="server connected to database" >}}
+---
+
+It could use some refinement, but it is working as expected.
+
+{{< video
+  src="videos/testing-react-app-2x-speed.mp4"
+  width="100%" >}}
+
+## 2. Upgrade React-Scripts → Vite
+I will upgrade the app font end to use **Vite** build tools. The app was originally built with **Create React App**, but this was deprecated in favor of other tools such as Vite, Parcel, and RSBuildVite.
+
+{{< image 
+    src="images/create-react-app-deprecation.jpg" 
+    caption="Create React App Deprecation blog post" >}}
+
+First I scaffold a new Vite project: `npm create vite@latest` and select the following options:
+- project Name: **client**
+- framework: **React**
+- variant: **Typescript**
+
+{{< image 
+    src="images/vite-scaffold-project.jpg" 
+    caption="Scaffold Vite project" >}}
+
+I do some work to hook everything up, then run the dev build.
+
+`npm run dev`
+
+{{< image 
+    src="images/vite-run-dev.jpg" 
+    caption="Vite run dev" >}}
+
+It built the site in `121 ms`. Very nice.
+
+
+## 3. Package Updates
+There are a few outdated packages that I should update. I run `npm install <package>@latest`;
+
+I verify that I do not have any remaining deprecated, old, bad packages:
+- `npm audit`
+- `npm outdated`
+- `npm ls deprecated`
+
+**server packages check**
+{{< image 
+    src="images/client-package-upgrades.jpg" 
+    caption="Client packages check" >}}
+**client packages check**
+{{< image 
+    src="images/server-package-upgrades.jpg" 
+    caption="Server packages check" >}}
+
+## 4. Javascript → Typescript Rewrite
+The project was sort of a mess anyway, so I will rewrite it in Typescript as I clean it up. The logic and UI handling made the `app.js` component very fat indeed. I was handling all of the state there, prop-drilling all the way down. It worked, but it did not accord with best practices. Undoubtedly it still does not accord entirely with best practices, if this is even a meaningful concept, but surely I have improved it somewhat anyway. The point was to revive an old project, touch something with React again, and to write some TypeScript, for it is new to me. I liked it.
+
+Anyway, there is nothing very interesting about the process of rewriting to TypeScript. The results are positive. Javascript with types, among other additional features. I extracted some components, restructured the directory, and ended up with a **front-end** directory like so:
+
+### Client / Front-end
+
+```
+└── 📁src
+    └── 📁api
+        └── api.ts
+        └── apiResponse.types.ts
+        └── index.ts
+    └── 📁components
+        └── ColorSelector.jsx
+        └── GenericMenu.tsx
+        └── Modal.tsx
+    └── 📁features
+        └── 📁box
+            └── box.types.ts
+            └── 📁components
+                └── BoxCard.tsx
+                └── BoxFormModal.tsx
+            └── index.ts
+            └── 📁services
+                └── BoxService.tsx
+        └── 📁item
+            └── 📁components
+                └── ItemCard.tsx
+                └── ItemFormModal.tsx
+            └── index.ts
+            └── item.types.ts
+            └── 📁services
+                └── ItemService.tsx
+    └── 📁icons
+        └── Ellipsis.tsx
+        └── Garbage.tsx
+        └── Icon.tsx
+        └── index.ts
+        └── Move.tsx
+        └── Pencil.tsx
+        └── Plus.tsx
+        └── Search.tsx
+    └── .env
+    └── app.tsx
+    └── index.css
+    └── index.tsx
+    └── tsconfig.json
+    └── vite-env.d.ts
+```
+
+### Server / Back-end
+This is a very simple flat directory containing the web API server.
+```
+└── 📁server
+    └── .env
+    └── .gitignore
+    └── package-lock.json
+    └── package.json
+    └── server.js
+```
+
+### Database
+As I mention above, the MongoDB database is hosted in a Docker container.  
+```
+└── 📁database
+    └── .env
+    └── .gitignore
+    └── compose.yml
+```
+
+## Results
+It works. The app source is hosted on my [git repository](https://git.uuard.com/nicholas/storage-manager)
+
+{{< video
+  src="videos/demo-react-app.mp4"
+  width="100%" >}}
\ No newline at end of file
diff --git a/container/site/content/posts/refried-beans/index.md b/container/site/content/posts/refried-beans/index.md
new file mode 100644
index 0000000..8e3861f
--- /dev/null
+++ b/container/site/content/posts/refried-beans/index.md
@@ -0,0 +1,139 @@
++++
+categories = ["food"]
+tags = ["recipe","reverse-engineer","taco bell"]
+date = 2025-04-14T20:40:00-05:00
+description = ""
+draft = false
+slug = "refried-beans"
+title = "🫘 Taco Bell Seasoned Refried Beans"
+author = "nicholas"
++++
+
+## Formula
+| ingredient                   | %       |
+| ---------------------------- | ------- |
+| pinto beans, cooked, drained | 100.00% |
+| water                        | 60.00%  |
+| lard                         | 6.00%   |
+| salt                         | 1.50%   |
+| lime juice                   | 0.60%   |
+| cumin                        | 0.10%   |
+| oregano, dried               | 0.10%   |
+
+## Process
+1. place beans in water
+2. soak 8+ hr.
+   > ***ALTERNATIVE: QUICK SOAK***:
+   > 1. place beans in water
+   > 2. bring water to the boil
+   > 3. maintain boil, 2 min.
+   > 4. remove from heat
+   > 5. cover
+   > 6. soak, 1 hr.
+
+3. drain the water
+4. place beans in fresh water
+5. simmer ~2 hr.
+6. drain
+7. combine ingredients in blender
+8. blend until very smooth
+
+{{< image 
+    src="images/pinto-beans-cooked-drained.JPG" 
+    caption="Pinto beans cooked and drained" >}}
+{{< image 
+    src="images/pinto-beans-cooked-drained-weight.JPG" 
+    caption="Pinto beans cooked and drained, weight" >}}
+
+{{< video
+  src="videos/refried-beans-blend.MP4"
+  width="100%"
+  loop=true
+  autoplay=true >}}
+
+
+## Results
+Here are the beans, finished, in a big steaming bowl. I imagined that it would be difficult to make these beans appear appetizing, but frankly they look just downright **edible** to me, which I consider a feat. It surprises me because, of the the thankfully very few memories that remain of me emptying a can of refried beans, the ones that do stick out to me as being among the more vile ones. The job produces a whole constellation of bad sensory inputs: the sucking, flarping noises that accompany each attempt to shake the beans loose from their can, the glossy organic slime that coats the brown pâté, and then finally the last blows of the assault-- a sudden new smell of what you hope is ordinary canned refried beans. I report none of these experiences here.
+
+Early in the blending process, the beans seem watery and loose as though measurement mistakes were made. But eventually they become unblendably thick, despite the mixture being composed of well over 50% water.
+
+
+{{< image 
+    src="images/refried-beans-product.JPG" 
+    caption="Refried beans finished" >}}
+
+---
+
+## Taco Bell - Seasoned Refried Beans
+I am curious about the makeup of Taco Bell's *Seasoned Refried Beans*. I want to see how it compares to my own refried beans formulation. So I navigate to their nutrition calculator and try to isolate their bean nutrition by selecting a menu item that contains *Seasoned Refried Beans* and removing all of the other ingredients until only the beans remain.
+
+{{< image 
+    src="images/taco-bell-refried-beans-nutrition.jpg" 
+    caption="Taco Bell Refried Beans nutrition" >}}
+
+---
+
+It turns out I can tweak the calculator values a bit to get better data. If I ask for 1000 servings, the calculator is forced to reveal the original, unrounded numbers. At least, this is what I imagine is happening. Anyway, I am able to get slightly better nutrition resolution this way.
+
+{{< image 
+    src="images/taco-bell-refried-beans-nutrition-x1000.jpg" 
+    caption="Taco Bell nutrition calculator x1000" >}}
+
+---
+
+Taco bell also publishes an ingredient list, plainly listing the ingredients that make up their *Seasoned Refried Beans* (although, confusingly absent is *water*. Probably some trick of FDA labeling guidelines):
+
+{{< image 
+    src="images/taco-bell-refried-beans-ingredient-list.jpg" 
+    caption="Taco Bell Refried Beans ingredient list" >}}
+---
+
+The ingredient list reveals roughly 5 ingredients that I care about: 
+- **beans**
+- **fat**
+- **salt**
+- **sugar**
+- **spice**
+
+I will ignore the remaining ingredients.
+
+First, I would like to know the **weight** of the serving size, which has been unhelpfully represented in terms of whole burritos. I will need to find the information elsewhere. This will allow me to calculate the ratios of each ingredient to the total weight, but I cannot know this without knowing the total weight. 
+
+This is only a problem if I care about how much water is present in the finished product (it is the only ingredient that contains no nutrients and therefore is not represented in the nutrition label, and is missing from the ingredient list), since the remaining nutrients have known ratios to *each other*. I could add any amount of water. This would work fine, but I would like to know more.
+
+Like I mention, the nutrition calculator at the Taco Bell website does not produce a nutrition label that contains a serving size, so I will have to find the information elsewhere. This is not hard. I found an image on the internet that lists each Taco Bell ingredient and their respective target weights per portion. One **portion** of *Seasoned Refried Beans* is 3.0 oz (85 g). 
+
+If I assume that the nutrition information provided by the nutrition calculator for one *Bean Burrito* minus everything but the *Seasoned Refried Beans* contains a 3.0 oz **portion**, then I have everything I need to proceed.
+
+{{< image 
+    src="images/taco-bell-target-weights.jpeg" 
+    caption="Taco Bell target weights" >}}
+
+Now I can create a formula for the beans. I will be using grams / the metric system as my base unit of weight. 
+
+
+| Nutrient    | Calculation                                                                                                                                                                     |
+| ----------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
+| Fat         | $\frac{3.4\ \text{g fat}}{85.0\ \text{g total}} = 0.04 \rightarrow 4\%$                                                                                                         |
+| Salt        | $\frac{\left( \frac{395\,\text{mg salt}}{10^3} \right)}{85.0\ \text{g total}} = 0.0118 \rightarrow 1.18$                                                                        |
+| Sugar       | $\left( \frac{0.62\ \text{g sugar}}{85.0\ \text{g total}} \right) = 0.0073 \rightarrow 0.73$                                                                                    |
+| Water, etc. | $\frac{\left( 85.0\ \text{g total}- 3.4\ \text{g fat} - 1.0\ \text{g salt} - 16.2\ \text{g carbs} - 0.62\ \text{g sugar} \right)}{85.0 \text{g total}} = 0.75 \rightarrow 75\%$ |
+
+
+#### Water
+The water calculation overestimates and establishes an upper bound on the true value. The calculation assumes that **all** of the weight of the serving size is accounted for by the nutrition weights, i.e. protein, carbohydrates, fat. This is not true, there is almost always other components, such as water, minerals, and other non-nutritives as seen in the image below.
+
+{{< image 
+    src="images/food-data-central-pinto-bean-cooked-drained.jp" 
+    caption="Food Data Central - pinto beans, cooked, drained" >}}
+    
+## Comparison
+It looks like Taco Bell's formulation uses a little more fat and a little more salt. My formulation contains:
+-  $\approx 0.9$% salt
+-  $\approx 3.6$% fat
+
+Versus Taco Bell's *Seasoned Refried Beans*:
+-   $\approx 1.18$% salt
+-   $\approx 4$% fat.
+
+Pretty close.
\ No newline at end of file
diff --git a/container/site/content/posts/server-monitor/index.md b/container/site/content/posts/server-monitor/index.md
new file mode 100644
index 0000000..834fc3a
--- /dev/null
+++ b/container/site/content/posts/server-monitor/index.md
@@ -0,0 +1,281 @@
++++
+categories = ["software"]
+tags = ["automation","grafana","influxdb","telegraf"]
+date = 2025-05-16T08:00:00-05:00
+description = ""
+draft = false
+slug = "server-monitor"
+title = "📈 Server Monitoring with Grafana"
+author = "nicholas"
++++
+
+In this post I will develop a server monitoring dashboard that will show me the status of my server at a glance. The goal here is to replicate the functionality of a simple command-line "real-time" system information monitor e.g. `top`, `htop`, etc. via a web interface. 
+
+{{< image 
+    src="images/btop.png" 
+    caption="Btop UI" >}}
+
+- A **web-based** monitoring dashboard, as opposed to e.g. `htop`, will be useful to me because it will allow me to access this dashboard from virtually any OS, anywhere at any time. No more `ssh`-ing into my machine and running all manner of monitoring-related commands. 
+- The web interface will also make integrating with other web-based dashboards trivial, which is something I plan to do later so that I can show my server stats alongside things like calendars, reminders, etc. in a master dashboard. 
+- The tools I plan to use will allow me to configure alerts that will notify me if certain metrics go beyond threshold values, e.g. disk space, CPU utilization > 90%, etc. 
+
+## Project Scope
+There are a few pieces of information I want immediately visible when I visit my dashboard:
+- disk temperatures
+- fan speeds
+- CPU temperatures
+- CPU utilization
+- processes & threads
+
+This is the basic set of host-level metrics that I care about at the moment, and once I am able to monitor these I will consider the project done. I will be using tools that will make additional metrics easy to add later, e.g. network traffic, container-level metrics, etc.
+
+## Tools
+Here is a diagram of the tools I will use and how they relate to each other.
+
+```mermaid
+graph TD
+  subgraph "🖧 Host Machine"
+    A[📊 Host metrics] -->|📥 Collect| B[Telegraf]
+    B[📦 Telegraf] -->|📊 Write| C[InfluxDB]
+    D[Grafana] -->|📨 Query|C[📦 InfluxDB]
+    C[📦 InfluxDB] -->|📈 Time-series data| D[Grafana]
+  end
+
+  D[📦 Grafana] -->|🌐 Web Browser| E[👤 User]
+```
+
+## Stuck with InfluxDB v2
+Unfortunately, I cannot run the latest version of Influxdb: `Influxdb:3`. My CPU does not support the required AVX instruction set, so the best I can do is `Influxdb:2`. I run into this same limitation each time I try to run a modern version (>=5) of MongoDB, which I use for other projects. Nevertheless, this older version will work fine, although I will be stuck writing my data queries in `Flux` instead of `SQL`. I really hate that.
+
+
+## Configuration
+#### Directory Structure
+Since I will want to be able to easily edit a `telegraf.conf` configuration file from the host machine, I will bind-mount a `telegraf` subdirectory within the root `monitor` directory. This will contain my `telegraf.conf`. Also, I will create a `.env` file to store secret values to pass to my `docker-compose.yml` file. The directory structure will look like this:
+```
+📁monitor/
+├── docker-compose.yml
+├── .env
+├── 📁telegraf/
+    └── telegraf.conf
+```
+
+#### Telegraf
+Telegraf is configured in `telegraf.conf`. I provide my configuration below. It contains many more input plugins than are being used, but I wanted to cover my bases.
+
+The two most important sections of this configuration file are the agent and the output sections.
+
+- **`[agent]`** - defines agent-level settings for the Telegraf daemon.
+    - `hostname = "server"` sets the `host` tag for all metrics collected by Telegraf.
+- **`[[outputs.influxdb_v2]]`** - defines the output plugin, or where Telegraf sends the collected metrics. Targets InfluxDB v2.
+  - `bucket = "telegraf"` defines the InfluxDB v2 bucket where metrics will be written. 
+
+Relevant to the example query I use below is the `[[inputs.smart]]` plugin. This plugin uses `smartctl` (smartmontools) to query disk health and attributes from the devices listed in `devices = [ "/dev/sda","/dev/sdb","/dev/sdc","/dev/sdd","/dev/sde","/dev/sdf" ]`. Since I added the line `attributes = true`, I will have access to individual SMART attributes e.g. **temperature**, reallocated sectors, power on hours, etc.
+
+
+```toml
+[agent]
+  interval = "10s"
+  round_interval = true
+  hostname = "server"
+
+[[outputs.influxdb_v2]]
+  urls = ["http://server:3997"]
+  token = "<token>"
+  organization = "ward"
+  bucket = "telegraf"
+
+[[inputs.cpu]]
+  percpu = true
+  totalcpu = true
+  collect_cpu_time = false
+  report_active = true
+
+[[inputs.diskio]]
+  devices = ["sda", "sdb", "sdc", "sdd", "sde", "sdf"]
+
+[[inputs.procstat]]
+  pattern = ".*"
+  pid_finder = "native"
+
+[[inputs.smart]]
+  path_smartctl = "/usr/sbin/smartctl"
+  use_sudo = true
+  devices = [ "/dev/sda","/dev/sdb","/dev/sdc","/dev/sdd","/dev/sde","/dev/sdf" ]
+  attributes = true
+
+[[inputs.mem]]
+[[inputs.disk]]
+[[inputs.net]]
+[[inputs.netstat]]
+[[inputs.system]]
+[[inputs.sensors]]
+[[inputs.kernel]]
+[[inputs.swap]]
+[[inputs.interrupts]]
+[[inputs.linux_sysctl_fs]]
+[[inputs.processes]]
+[[inputs.zfs]]
+```
+
+#### Docker image
+I am not using the official Telegraf image, but instead a third-party customized variant [`golift/telegraf`](https://github.com/golift/telegraf-docker). This is because I needed to monitor HDD temperatures, and wanted to use `smartctl` (smartmontools) to do it. Telegraf can do this, but using it inside a container makes this difficult. 
+
+The [repository README](https://github.com/golift/telegraf-docker/blob/main/README.md#why) explains the issue:
+
+> Provides a telegraf docker image with added tools for monitoring disks, sensors and IPMI. This exists because the base telegraf Docker image makes it difficult to monitor some system metrics. 
+>
+> Re-creates the official Telegraf docker container with the following tools added:
+> - smartctl (smartmontools)
+> - ipmitool
+> - nvme-cli
+> - sensors (lm-sensors)
+> - mtr (mtr-tiny)
+> - sudo
+
+#### env
+```env
+GRAFANA_ADMIN_USER=admin
+GRAFANA_ADMIN_PASSWORD=<password>
+
+GRAFANA_PORT=3999
+INFLUXDB_PORT=3997
+TELEGRAF_PORT=3996
+
+DOCKER_INFLUXDB_INIT_USERNAME=admin
+DOCKER_INFLUXDB_INIT_ADMIN_TOKEN=<token>
+DOCKER_INFLUXDB_INIT_PASSWORD=<password>
+DOCKER_INFLUXDB_INIT_ORG=ward
+```
+
+#### Docker Compose
+```yml
+volumes:
+  grafana_data:
+  influxdb_data:
+
+
+networks:
+  monitor_net:
+    name: monitor_net
+    driver: bridge
+
+services:
+  influxdb:
+    image: influxdb:2
+    container_name: influxdb
+
+    ports:
+      - "${INFLUXDB_PORT}:8086"
+    restart: unless-stopped
+    volumes:
+      - influxdb_data:/var/lib/influxdb2
+    environment:
+      - DOCKER_INFLUXDB_INIT_MODE=setup
+      - DOCKER_INFLUXDB_INIT_USERNAME=${DOCKER_INFLUXDB_INIT_USERNAME}
+      - DOCKER_INFLUXDB_INIT_PASSWORD=${DOCKER_INFLUXDB_INIT_PASSWORD}
+      - DOCKER_INFLUXDB_INIT_ORG=${DOCKER_INFLUXDB_INIT_ORG}
+      - DOCKER_INFLUXDB_INIT_BUCKET=telegraf
+      - DOCKER_INFLUXDB_INIT_ADMIN_TOKEN=${DOCKER_INFLUXDB_INIT_ADMIN_TOKEN}
+    networks:
+      - monitor_net
+
+  telegraf:
+    image: golift/telegraf
+    privileged: true
+    container_name: telegraf
+    restart: unless-stopped
+    volumes:
+      - ./telegraf:/etc/telegraf:ro
+      - /:/hostfs:ro
+    environment:
+      - HOST_ETC=/hostfs/etc
+      - HOST_PROC=/hostfs/proc
+      - HOST_SYS=/hostfs/sys
+      - HOST_VAR=/hostfs/var
+      - HOST_RUN=/hostfs/run
+      - HOST_MOUNT_PREFIX=/hostfs
+    ports:
+      - "${TELEGRAF_PORT}:9273"
+    networks:
+      - monitor_net
+
+  grafana:
+    image: grafana/grafana-oss
+    container_name: grafana
+    restart: unless-stopped
+    environment:
+      - GF_SECURITY_ADMIN_USER=${GRAFANA_ADMIN_USER}
+      - GF_SECURITY_ADMIN_PASSWORD=${GRAFANA_ADMIN_PASSWORD}
+      #- GF_SERVER_ROOT_URL=http://grafana.uuard.com
+    ports:
+      - "${GRAFANA_PORT}:3000"
+    volumes:
+      - 'grafana_data:/var/lib/grafana'
+    healthcheck:
+      test: [ "CMD", "wget", "--spider", "http://localhost:3000/login" ]
+      interval: 30s
+      timeout: 10s
+      retries: 3
+    networks:
+      - monitor_net
+```
+
+#### Grafana Config & Examples
+The first two steps of configuring data collection(via **Telegraf**) and writing (via **InfluxDB**) are done. Now I need to fetch, process, and display the data to my liking (via **Grafana**). This mostly involves writing ugly Flux queries and selecting a visualization to represent the data.
+
+##### HDD Temperature
+This query gives me the temperature (°C) of each HDD in my machine:
+```flux
+from(bucket: "${datasource}")
+  |> range(start: -1m)
+  |> filter(fn: (r) =>
+    r.host == "${host}" and
+    r._measurement == "smart_device" and
+    r._field == "temp_c")
+  |> group(columns: ["device"])
+  |> last()
+  |> yield(name: "temperature")
+```
+In this query, there are two variables used: `datasource` and `host`. These were both defined in `telegraf.conf`.
+
+```toml
+[agent]
+  ...
+  hostname = "server"
+
+[[outputs.influxdb_v2]]
+  ...
+  bucket = "telegraf"
+```
+
+The query returns the latest (`last`) `temp_c` values per `device`, for a single `host`, from the last `60` seconds of SMART metrics. I selected the gauge visualization to represent this. 
+
+##### CPU Core Utilization
+This query gives me the CPU utilization per core (100% minus IDLE).
+
+```flux
+from(bucket: "${datasource}")
+  |> range(start: -1m)
+  
+  |> filter(fn: (r) =>
+    r.host == "${host}" and
+    r._measurement == "cpu" and
+    r._field == "usage_idle" and
+    r.cpu != "cpu-total"
+  )
+  |> group(columns: ["cpu"])
+  |> aggregateWindow(every: 1m, fn: mean, createEmpty: false)
+  |> map(fn: (r) => ({ r with _value: 100.0 - r._value }))
+  |> yield(name: "core_total_usage")
+```
+
+## Result
+Here is what this looks like alongside the rest of the metrics I configured:
+
+{{< image 
+    src="images/grafana-live-dashboard.png" 
+    caption="Grafana Dashboard" >}}
+    
+Each of the visualizations in this image are created with Flux queries similar to the example above. I don't bother writing each one out here. Instead, I attach a [JSON file](files/master.json) that can be imported into Grafana. It contains among many other details all of the queries used in the image.
+
+Done.
\ No newline at end of file
diff --git a/container/site/content/posts/server-rack/index.md b/container/site/content/posts/server-rack/index.md
new file mode 100644
index 0000000..ad0569c
--- /dev/null
+++ b/container/site/content/posts/server-rack/index.md
@@ -0,0 +1,52 @@
++++
+categories = ["technology","build"]
+date = 2024-11-15T17:43:15Z
+description = ""
+draft = false
+slug = "server-rack"
+title = "🗄️ Server Rack"
+author = "nicholas"
++++
+
+This all began as a result of a growing sense of anxiety around my old server. It was my first ever computer build: a tiny little 20L ITX box whose specifications were matched exactly to what I needed *at the time* with no room for physical expansion. As I added tasks to the processor, it ran hotter, the fans ran louder, and the drives, too became worryingly (~45°C) hotter especially during days in the summer. It would hobble along just fine, but I was psychologically tormented by the increasing jank of it. My first desktop computer was a pre-built Dell XPS which was also a difficult-to-upgrade machine that suffered some significant thermal throttling. Both of these systems were limited by space and the components which could fit on their motherboards -- these are the most important factors. I would not make the same mistake again, but perhaps an entirely different one. My solution was to buy a giant barebones computer case that could be configured with just about any hardware I could want. Plenty of space for cooling, and plenty of space to work in, and plenty of space to fill with components.
+
+## The Rack Solution
+The eventual solution then, was a couple of giant server chassis that would accommodate up to a dual-socket server motherboard and huge 150mm+ CPU coolers. I thought about upright desktop cases, or media-center type cases, either of which I *could* store on a wire shelf, which was initially my favored option not least for being budget-friendly. It was hard to decide against this, after all I am a huge fan of wire shelving units, and use them for everything! Plant cart, TV stand, mixer stand, shoe racks. They are a fantastic. But the idea of a server rack, that sounded so much cooler. Totally impractical, totally overkill, totally unnecessary, and yet I asked myself again and again: why not? To which I heard not a whisper of response so compelling as to stop me.
+
+### Requirements 
+* **Wheels**
+   * I prefer wherever possible and sensible to put heavy, large items like shelves, racks, carts, tables, chairs, desks, etc on wheels. The ability to move such heavy things around is in any case useful, but especially so in small apartment where the layout of the room is never certain. And I like the orderliness and look of a rack. (Note, my apartment floor is not nearly flat enough to be able to roll this cabinet while maintaining squareness, sadly).
+* **Maximum height of ~30"**
+   * The server rack is ~28" tall, which is a height that allows it to fit under almost any standard desk This occupies almost all of the vertical space under my desk and therefore minimizes wasteful space.
+   * The rack is 23.5" wide. If the rack is positioned at either end of the desk, it still leaves room enough for me to sit anywhere ranging from the center of the desk to the opposite end.
+   * The rack depth will be roughly 24". The maximum depth allowed by the desk is infinite, but to be flush with the edge of the desk the rack will need to be no more than 22" deep. This may not be practical or even possible, but at worst the rack will jut out a few inches.
+* **Accommodate two massive server chassis**
+   * This would be for my two machines: PC and server
+  
+## Components
+I compared a lot of server racks, and most were too expensive to consider. The remaining options were compared on the basis of their total weight, and reviews. I reasoned that the less-massive racks, all else being ~equal, would be less stable and have a shorter life. Silly, maybe, but since I was doing something a bit unnecessary and overkill in the first place, it follows that I was no longer bound by sound reasoning. I still stand by the notion that weight is a good proxy for durability all else being roughly equivalent, though. I have no regrets.
+
+
+| Type        | Item                                                                        |
+| ----------- | --------------------------------------------------------------------------- |
+| Server Rack | VIVO CART-SR12U 12U Freestanding Open Frame Server Rack                     |
+| PDU         | Tripp Lite UDRS-1215 1U 14-Outlet Rackmount PDU Surge Protector Power Strip |
+| Chassis     | (2) Rosewill RSV-R4000U 4U Server Chassis                                   |
+| Shelf       | StarTech 1U 10" Deep Server Rack Shelf                                      |
+| Rails       | iStarUSA TC-RAIL-26                                                         |
+
+
+- I selected a 12U rack because it will fit under a desk, and my total requirements were 12U. For now, I figure I will just leave 1U vertical space between the chassis. This will occupy 9U total. The PDU and shelf both occupy 1U. This amounts to 11U. Good.
+
+- The PDU was selected for its 3000 Joule surge protection rating. I am informed that this is good enough, but do not know much about the implications of this number "3000". It has outlets facing both front and back. It servers dual purposes -- tidy cable management for power cables in the back and powering miscellaneous devices in the front.
+
+## Photos
+I have some photos of the rack and its components. It is tucked under the desk in the corner of the apartment living room. Very pleased. Improvements are in order for the external cable management once everything is "stable".
+
+{{< gallerynew name="server-rack-gallery" >}}
+
+## "Servers"
+I have two chassis mounted in the rack. I have a couple of posts relating to these machines:
+- server
+- pc
+  
\ No newline at end of file
diff --git a/container/site/content/posts/server-rack/server-rack-gallery.yaml b/container/site/content/posts/server-rack/server-rack-gallery.yaml
new file mode 100644
index 0000000..f9f4e19
--- /dev/null
+++ b/container/site/content/posts/server-rack/server-rack-gallery.yaml
@@ -0,0 +1,20 @@
+images:
+  - src: "images/server-chassis-open.JPG"
+    alt: "Open server chassis"
+    caption: "Server chassis open"
+
+  - src: "images/server-rack-drawer-oblique-2.JPG"
+    alt: "Oblique view of server rack drawer"
+    caption: "Server drawer view 2"
+
+  - src: "images/server-rack-drawer-oblique.JPG"
+    alt: "Oblique angle of server rack drawer"
+    caption: "Server drawer view"
+
+  - src: "images/server-rack-front.JPG"
+    alt: "Front view of server rack"
+    caption: "Front of server rack"
+
+  - src: "images/server-rack-legs.JPG"
+    alt: "Legs of the server rack"
+    caption: "Server rack legs"
diff --git a/container/site/content/posts/solar-generator/index.md b/container/site/content/posts/solar-generator/index.md
new file mode 100644
index 0000000..9f6a6d4
--- /dev/null
+++ b/container/site/content/posts/solar-generator/index.md
@@ -0,0 +1,145 @@
++++
+categories = ["technology","build"]
+date = 2021-09-09T19:06:11Z
+description = ""
+draft = false
+slug = "solar-generator"
+title = "☀️ Mobile Deck & Solar Generator"
+author = "nicholas"
++++
+
+Sometime in 2021 I build a wood platform and solar generator to sit on top of the latter rack I installed on my truck. I use it for camping, fireworks shows, tailgating, etc. The solar generator allows me to silently power a portable fridge, lights, cooking equipment. Anything that draws less than 1200 watts. The deck was built as an all-purpose platform. It is large enough to sleep on or put chairs on, and for my sanity was totally and completely overengineered. It places me something like 9 feet off the ground, comfortably away from ground-dwelling bugs and critters.
+
+## Solar Generator Build
+This is a mostly comprehensive list of components used to assemble the solar generator.
+
+{{< image 
+    src="images/solar-generator-components-assembled.jpg" 
+    caption="Solar generator" >}}
+{{< image 
+    src="images/solar-generator-installed.jpg" 
+    caption="Solar generator installed" >}}
+
+### Main Electrical Components
+- 100 Ah liFePo4 battery
+- 100w solar panels (3)
+- 40A solar charge controller
+- Battery switch
+- Inverter
+- Fuse box
+- Circuit breakers (2)
+- Bus bar
+
+### Tools and Hardware
+- MC4 crimp tool
+- Wire strippers
+- Wire cutters
+- Hammer
+- Screwdriver
+
+### Hardware Accessories
+
+- Mc4 connectors, terminals
+- Crimp ring terminals
+- Screws
+- Wire clamps
+- Shrink tube (sized for wire)
+- Copper lugs (sized for wire, terminal)
+- 3/4" plywood
+- Strut channel
+- Fuses
+- Strut channel mounting hardware
+- 6AWG stranded copper wire
+- 10 AWG stranded copper wire
+- 12V female cigarette lighter outlet
+
+## Determining Requirements
+Given the purpose of a solar generator is to generate power for use in various devices, I consider which devices will operate using the power from the solar generator. This document will assume requirements, but the reasoning and calculation used to determine components will be the same.
+
+### Load Type
+
+| Power Consumption (W) | Run Time/Day (h) | Average Daily Power Use (Wh) |
+| --------------------- | ---------------- | ---------------------------- |
+| Portable refrigerator | 60               | 8                            | 480 |
+| Laptop charger        | 40               | 4                            | 160 |
+| Rice cooker           | 300              | 0.3                          | 90  |
+| Phone charger         | 30               | 2                            | 60  |
+| Fan                   | 5                | 4                            | 20  |
+| **Totals**            | 435              | 810                          |
+
+### Components
+
+#### Battery
+
+Since the above chart indicates a daily average power use of 810 Wh, a battery with at least this much capacity should be used to be able to run them for a full day with no sun. Building the generator around this near-worst-case assumption provides a comfortable margin. (Again, battery sizing depends on many variables such as sunlight availability, budget, etc.)
+
+Batteries are typically labeled in reference to their capacity, in amp-hours Ah. To calculate watt-hours Wh, multiply the nominal battery voltage 12.4 with the stated capacity 100.
+
+`12.4 V * 100 Ah = 1240 Wh` ...This is good – 1240 > 810 – a fully charged battery will theoretically run the selected devices for at least 24 hours.
+
+#### Solar Panels
+
+One of my only requirements was that the solar panels be mountable in a way that will not make me nervous driving down the highway – anything that would accept metal bolts. I imagined this would be common, and the first local source seemed to support this notion. I sourced my panels from Harbor Freight Tools. The price and build quality of the solar panels they sold were unbeatable at the time (2021), and go pretty much unbeatable to this day (2024). They included unfilled bolt holes in the frame, they were cheap, and they were dimensioned to be compatible with the spacing of my channel struts. There were no further considerations.
+
+Here are some photos of the electronics. It is a mostly-fully assembled board of all of the components necessary to collect and convert solar energy. They are mounted on a piece of plywood cut to fit flush with back wall of the orange jobsite box. Pictured from left to right: power switch, breaker, charge controller, bus bar, another breaker, fuse box, and inverter.
+
+{{< image 
+    src="images/solar-generator-components.jpg" 
+    caption="Solar generator component layout" >}}
+
+## Roof Rack Deck Platform Build
+
+In the of the photos below, it is possible to see how the deck is mounted. It is useful to think of the assembly in three parts:
+
+- **Channel struts** that run the length of the ladder rack
+    - Three ~8' steel channel struts are each mounted to the tubular steel ladder rack. The half-slot type channel strut is oriented channel-side-up, atop and flush with the tube. This allows a U-bolt to be slotted into the strut, around the tube, and fastened with a washer plate and a two bolts. Semi-permanent threadlocker is applied to each of the 2 threads on each of the 3 u-bolts to ensure that the vibration of the road does not loosen the fasteners.
+
+- **Joists (wooden 2x4)**
+    - Three ~8' wood 2x4 pieces of framing lumber are each mounted to the channel strut. At pre-determined points along the board – avoiding the spaces along the strut with U-bolt mounting hardware beneath – a 1/2" diameter hole is bored through the wood, with a countersink hole large enough to allow a bolt head to both sit flush with the wood once inserted, and wide enough to allow the bolt to be tightened with a socket wrench. The bolt is inserted into the hole, and a spring nut is waiting in the channel for the bolt thread to be inserted. As the bolt is rotated, it pulls or
+    
+{{< image 
+    src="images/truck-deck-complete-underside.jpg" 
+    caption="Deck underside" >}}
+
+- **Wooden deck**
+    - This component of the assembly is made up of 14 4' pieces of pressure treated, stained and sealed pieces of decking lumber screwed into the wooden joists.
+
+{{< image 
+    src="images/truck-deck-lumber.jpg" 
+    caption="Deck Lumber" >}}
+{{< image 
+    src="images/truck-deck-lumber-stained.jpg" 
+    caption="Deck lumber stained" >}}
+{{< image 
+    src="images/truck-deck-assembly.jpg" 
+    caption="Deck assembly" >}}
+
+
+### Assembly
+
+#### Hardware
+
+- Decking lumber - 5/8" x ~4'
+- 2 1/2" Deck screws
+- *Thompson's* WaterSeal Wood Stain
+- 2x4 Joists
+- Channel strut hardware
+- Blue thread lock
+
+#### Process
+
+The simplified process of assembly can be expressed in these steps:
+
+1. Channel strut, wooden joists, and deck boards are cut to size
+2. Wooden components are stained and sealed
+3. Channel strut is mounted to ladder rack
+4. Wood joists are mounted to the channel strut
+5. Deck boards are fastened to wooden joists
+
+{{< image 
+    src="images/truck-deck-night-photography.jpg" 
+    caption="Night photography from the deck" >}}
+    
+{{< image 
+    src="images/truck-deck-night-distant.jpg" 
+    caption="Deck at night from a distance" >}}
\ No newline at end of file
diff --git a/container/site/content/posts/sourdough/index.md b/container/site/content/posts/sourdough/index.md
new file mode 100644
index 0000000..5e9bbf6
--- /dev/null
+++ b/container/site/content/posts/sourdough/index.md
@@ -0,0 +1,46 @@
++++
+categories = ["food"]
+date = 2025-02-22T12:09:00-06:00
+description = ""
+draft = false
+slug = "sourdough"
+title = "🥖 'Sourdough'"
+author = "nicholas"
++++
+
+I like the flavor of sourdough, but lack the inclination to manage a starter culture. My issue is the difficulty of producing a stable, consistent culture of yeast and bacteria. There are too many factors to count that can affect the product. Any success or failure will feel like a consequence of luck or randomness since I cannot easily scrutinize the process that lead to any given culture. There is just too much noise, chaos, randomness. I am far too humble to imagine myself able to play the role of god over millions and millions of these microbic lives.This would bother me less if my enjoyment was derived from expressing myself artistically by crafting a Mercury retrograde sun-fermented, rough-hewn heirloom-grain-fed starter culture. That would be much more interesting, but instead my enjoyment relies on the process of mastery and achieving goals through predictable means. 
+## Tools
+### Banneton
+I use a rattan banneton to proof my fake sourdough bread. I like the concentric ring pattern it creates.Here are a couple of images:
+
+{{< image 
+    src="images/banneton-proofing.JPG" 
+    caption="Banneton proofing basket" >}}
+
+{{< image 
+    src="images/sourdough-baked.JPG" 
+    caption="Baked sourdough" >}}
+	
+#### First Use Care
+I have documented the process of caring for the bannetons.
+
+1. Spray the banneton with water. Leave no dry spots.
+2. Coat the Inside with Flour
+	1. Place an amount of flour in the banneton that will coat the entire inside surface. 
+	2. Spread by rotating. Flour will stick to wet surface. 
+	3. Remove excess flour.
+4. Allow the banneton to air dry.
+## Clean
+Do not clean after each use. ~Monthly, dry  brush out excess flour.
+## Store
+Allow banneton to completely dry before storing.
+## Flour coating during proofing
+There are many options. Consensus seems to be one of the following:
+- rice flour
+- 1:1 rice:white flour
+### Rice Flour
+The reasons I use rice flour:
+- Contains no gluten - no stickiness
+- low protein content -- does not char easily.
+- fine texture
+
diff --git a/container/site/content/posts/spice-storage-label/index.md b/container/site/content/posts/spice-storage-label/index.md
new file mode 100644
index 0000000..adf04e9
--- /dev/null
+++ b/container/site/content/posts/spice-storage-label/index.md
@@ -0,0 +1,72 @@
++++
+categories = ["build"]
+date = 2024-10-01T05:02:56Z
+description = ""
+draft = false
+slug = "spice-storage"
+title = "🌿 Spice Storage & Labeling"
+author = "nicholas"
++++
+
+It is my understanding that among the members of the foodservice industry that most closely reflect the activities of the home cook, the standard for spice storage is as follows: place each variety of spice or seasoning into its own transparent plastic deli container, lid them, label them and stack them. The reasoning behind this standard – as I have discovered first hand – are:
+
+ * ubiquitous
+ * cheap
+ * replaceable
+ * interchangeable
+ * stackable
+ * standardized
+ * flexible
+ * visible
+ * accessible
+ * virtually air-tight
+
+I have used this method of spice storage for years now, and it is almost nearly perfect. Every problem I ever had with the manufacturer packaging and other inferior storage methods is solved by these containers. Narrow openings which do not permit scooping, non-standard, non-stacking, space-inefficient container designs, low-visibility contents, inconsistent fonts / labeling, and unreliable sealing mechanisms. I could go on. These issues can be resolved for just a few dollars and some time.
+
+
+## The Immediate Problem
+My problem at the moment is that I made the mistake of applying a paper label to each container. These paper labels are not visually durable. The labels have stuck without issue for two years, but the ink has worn off some of the more frequently used seasonings. My proposed solution is to print the master list of spices, cut them into label size, and tape them to the containers using packing tape. OR use plastic labels made for my printer label.
+
+## Supply List
+I will need a few items to complete my project.
+
+* printer
+* paper labels
+* isopropyl alcohol
+* a cloth
+* nitrile gloves
+
+This is a list of each label I will need to attach to a deli container. There are 67. so I will need to streamline the process.
+
+| Ingredient      | Ingredient         | Ingredient         | Ingredient         |
+| --------------- | ------------------ | ------------------ | ------------------ |
+| allspice        | garlic             | marjoram           | panko              |
+| alpha-amylase   | garlic salt        | minced garlic      | paprika            |
+| ascorbic acid   | ginger             | minced onion       | parsley            |
+| bagel           | iodized salt       | mint               | red pepper         |
+| baking powder   | korean chili       | msg                | rosemary           |
+| baking soda     | kosher salt        | mustard            | sea salt           |
+| basil           | l-cystein          | nutmeg             | sesame seed        |
+| black pepper    | marjoram           | old bay            | sichuan peppercorn |
+| black pepper    | minced garlic      | onion              | sodium citrate     |
+| bread crumb     | minced onion       | oregano            | SSL                |
+| cajun           | mint               | panko              | tajin              |
+| cardamom        | msg                | paprika            | tarragon           |
+| cayenne         | mustard            | parsley            | thyme              |
+| chicken bullion | nutmeg             | red pepper         | tomato bullion     |
+| chili           | old bay            | rosemary           | turbinado sugar    |
+| chipotle        | onion              | sea salt           | turmeric           |
+| cinammon        | oregano            | sesame seed        | vital wheat gluten |
+| clove           | panko              | sichuan peppercorn | white pepper       |
+| cocoa           | paprika            | sodium citrate     | xanthan gum        |
+| coriander       | parsley            | SSL                | yeast              |
+| corn starch     | red pepper         | tajin              | za'atar            |
+| cumin           | rosemary           | tarragon           |                    |
+| curry           | sea salt           | thyme              |                    |
+| dark cocoa      | sesame seed        | tomato bullion     |                    |
+| dill            | sichuan peppercorn | turbinado sugar    |                    |
+| fennel          | sodium citrate     | turmeric           |                    |
+| five spice      | SSL                | vital wheat gluten |                    |
+| furikake        | tajin              | white pepper       |                    |
+| garam masala    | tarragon           | xanthan gum        |                    |
+| garlic          | thyme              | yeast              |                    |
diff --git a/container/site/content/posts/spring-rest-api-pt-i/index.md b/container/site/content/posts/spring-rest-api-pt-i/index.md
new file mode 100644
index 0000000..52becd2
--- /dev/null
+++ b/container/site/content/posts/spring-rest-api-pt-i/index.md
@@ -0,0 +1,179 @@
++++
+categories = ["software"]
+tags = ["java"]
+date = 2024-11-10T15:55:42Z
+description = ""
+draft = false
+slug = "java-spring-tomcat"
+title = "☕ Developing Spring REST API - Pt. I"
+author = "nicholas"
++++
+
+Much time has passed since I last worked with Spring framework in Java. I need to build out a development environment to enable me to build Java applications. In this log, the environment will be configured to include the following tools and features:
+   * Eclipse IDE
+   * Java (JRE, JDK)
+   * Maven (dependency manager, etc.)
+   * Spring Boot (Java framework)
+
+This log is a series of baby steps that will result in basic implementation of a REST API.
+
+
+## Code Editor
+First, I need a code editor/IDE. I selected Eclipse for no particular reason. My understanding is that IntelliJ IDEA is a more modern, refined alternative that I may try down the line. For now, all I need is a default installation to get started.
+
+
+## Hello World
+I allow the IDE to walk me through a hello world tutorial to become familiar with the software and remind myself of the basic structure of a Java program.
+
+
+## Spring REST API endpoint
+My next milestone is to set up a trivial API endpoint to familiarize myself with Spring MVC. I will use this framework to build an endpoint that will return "hello world". Eventually, this project will become an API for a plant simulation app.
+
+ * I use spring initializr to automate the creation of the necessary boilerplate to run a minimally viable endpoint.
+
+ * I create a controller class for the API: PlantController.java.
+ * This class uses Spring's @RestController and @GetMapping annotations to define the controller and one endpoint.
+ * For now, I have defined a GET endpoint at /helloworld, which returns the string "hello world".
+
+```java
+package plantsim.PlantSimulatorAPI;
+
+import org.springframework.web.bind.annotation.GetMapping;
+import org.springframework.web.bind.annotation.RestController;
+
+@RestController
+public class PlantController {
+
+	@GetMapping("/helloworld")
+	public String helloworld() {
+		return "hello world";
+	}
+
+}
+```
+It works. Now I can configure my data models and database.
+
+## Database
+Database configuration will require a few steps.
+
+* Create in-memory database with h2
+* Using the credentials defined below and in application.properties I am able to connect to the database testdb at /h2-console.
+
+```java
+spring.datasource.url=jdbc:h2:mem:testdb
+spring.datasource.driver-class-name=org.h2.Driver
+spring.datasource.username=sa
+spring.datasource.password=password
+spring.h2.console.enabled=true
+```
+
+ * In the h2 console, I can execute SQL queries and explore the database structure, etc.
+
+ 1. Initialize database – populate with data
+
+ * Since I have defined an entity class for the plant object, Hibernate will automatically create the plant database table for me. I will need to populate the table data, however.
+ * I populate the tale with data using data.sql. By default, Spring Boot will look in src/main/resources for the script and execute it after the table has been initialized (according to application.properties -> spring.jpa.defer-datasource-initialization=true
+ * I configure the script below to insert a couple of rows:
+
+```sql
+-- Insert rows
+INSERT INTO plant (name) VALUES ('Ficus Audrey');
+INSERT INTO plant (name) VALUES ('Lucky Bamboo');
+INSERT INTO plant (name) VALUES ('Chinese Money Plant');   
+```
+ 3. Configure API endpoint to return plant objects
+
+ * To return a plant object instead of a string, I will need to configure following:
+   * Plant entity that matches database schema – This will use object-relational mapping (ORM) to map my Java entities to my database table plant
+
+```java
+package plantsim.PlantSimulatorAPI;
+
+import jakarta.persistence.Entity;
+import jakarta.persistence.GeneratedValue;
+import jakarta.persistence.GenerationType;
+import jakarta.persistence.Id;
+
+@Entity
+public class Plant {
+
+	@Id
+	@GeneratedValue(strategy = GenerationType.IDENTITY)
+	private Long id;
+	private String name;
+
+	public Plant() {
+	}
+
+	public Plant(Long id, String name) {
+		this.id = id;
+	}
+
+	public void setId(Long id) {
+		this.id = id;
+	}
+
+	public String getName() {
+		return name;
+	}
+
+	public void setName(String name) {
+		this.name = name;
+	}
+
+}
+```  
+ * Add JPA dependency to pom.xml – JPersistence API
+```
+jakarta.persistence
+jakarta.persistence-api
+3.1.0
+```
+ * Create a JPA repository to fetch the Plant objects from testdb.
+
+
+
+
+```java
+package plantsim.PlantSimulatorAPI;
+
+import org.springframework.data.jpa.repository.JpaRepository;
+
+public interface PlantRepository extends JpaRepository {
+}
+```
+
+ * Update the controller to return the Plant object.
+
+
+
+
+```java
+    @Autowired
+	private PlantRepository plantRepository;
+
+	@GetMapping("/plant")
+	public List getPlants() {
+		return plantRepository.findAll();
+	}
+```
+
+## Results
+
+If I navigate to /plant, the program returns a JSON-formatted string of the all of the plants stored in the database. I will use this as a foundation to later build into the project actual functionality.
+
+```json
+ [
+  {
+    "name": "Ficus Audrey"
+  },
+  {
+    "name": "Lucky Bamboo"
+  },
+  {
+    "name": "Chinese Money Plant"
+  }
+]
+```
+
+
diff --git a/container/site/content/posts/spring-rest-api-pt-ii/index.md b/container/site/content/posts/spring-rest-api-pt-ii/index.md
new file mode 100644
index 0000000..dc3db21
--- /dev/null
+++ b/container/site/content/posts/spring-rest-api-pt-ii/index.md
@@ -0,0 +1,340 @@
++++
+categories = ["software"]
+tags = ["java"]
+date = 2024-11-14T20:57:28Z
+description = ""
+draft = false
+slug = "spring-rest-api-pt-ii"
+title = "🍃 Developing Spring Rest API (pt. II)"
+author = "nicholas"
++++
+
+In my last log entry, I laid the groundwork for building a simple API that simulates plants. In this log entry I add the ability to create, delete, water, and fertilize plants. I am keeping the scope of this project very small and simple – my sustained attention is reserved for things I am truly passionate about, and this project is merely good fun. The gratification will come swift and total.
+
+## Plant Simulation Operations
+Here I define the things that the plant simulator ought to be able to do. Before I begin writing much code, I want to understand the requirements and simulate how the simulation will work in my head (now in text). This will serve as a kind of proof of concept and clarify my thinking about the structure of the models and controllers.
+
+ * Plants will be managed with basic operations:
+   * Create (plant seed)
+   * Delete
+ * Plants will be maintained with operations:
+   * Water
+   * Fertilize
+ * Plants will progress through growth stages:
+   * Seed
+   * Germination
+   * Seedling
+   * Vegetating
+   * Reproduction
+   * Final
+ * Plants will manage their own state `waterLevel`, `nutrientLevel`, and `growthStage` according to arbitrary values I set.
+   * The waterLevel will be calculated according to the time of last watering.
+   * Similarly, nutrientLevel will be calculated according to the time of last fertilizing.
+   * The `growthStage` will be determined by the time that has passed since the plant was created.
+
+
+## Plant Class
+
+### Constants:
+
+ * `HYDRATION_DECAY_RATE`
+ * `NUTRIENT_DECAY_RATE`
+   * These constants control how quickly hydration and nutrient levels decay over time.
+ * `growthStageMap`: A `NavigableMap<Long, GrowthStage>` that maps time intervals (in hours since plant creation) to plant growth stages. It determines the plant's growth stage based on the time since creation.
+
+### Fields:
+
+ * **id**
+   * Unique identifier for the plant
+   * auto-generated
+ * **name**
+   * The name of the plant.
+ * **growthStage**
+   * Enumerated strings representing the current growth stage of the plant
+   * initialized to SEED
+ * **created**
+   * Timestamp indicating when the plant was created
+   * default `CURRENT_TIMESTAMP`
+ * **health**
+   * Integer representing the plant's health
+   * between 0 and 100
+ * **hydration**
+   * Integer representing the plant's hydration level
+   * between 0 and 100
+ * **nutrientLevel**
+   * Integer representing the plant's nutrient level
+   * between 0 and 100.
+ * **lastWatered**
+   * Timestamp of the last time the plant was watered.
+ * **lastFertilized**
+   * Timestamp of the last time the plant was fertilized.
+
+
+
+### Methods - Getters and Setters:
+
+ * **getGrowthStage()**
+   * Computes the plant’s growth stage based on the number of hours since creation by using `growthStageMap`. It returns the closest growth stage based on the elapsed time.
+ * **getHealth()**
+   * Calculates plant health as a weighted sum of hydration and nutrient level.
+   * Hydration contributes 90% and nutrient level contributes 10%.
+ * **getNutrientLevel()**
+   * Computes the nutrient level based on the time elapsed since the last fertilization. Nutrients decay over time at a rate defined by `NUTRIENT_DECAY_RATE`.
+ * **getHydration()**
+   * Computes the hydration level based on the time elapsed since the last watering. Hydration decays over time at a rate defined by `HYDRATION_DECAY_RATE`.
+ * **waterPlant()**
+   * Increases the hydration level by 20, ensuring it doesn't exceed 100.
+   * Updates the `lastWatered` timestamp.
+ * **fertilizePlant()**
+   * Increases the nutrient level by 20, ensuring it doesn't exceed 100.
+   * Updates the `lastFertilized` timestamp.
+
+### Validation:
+
+ * Uses `@Min` and `@Max` annotations to validate that `health`, `hydration`, and `nutrientLevel` are within the range [0, 100].
+
+### JPA Annotations:
+
+ * **@Entity**
+   * Marks the class as a JPA entity, making it a persistent object.
+ * **@Table(name = "plant")**
+   * Specifies the database table name as plant.
+ * **@Id**
+   * Marks `id` as the primary key.
+ * **@GeneratedValue(strategy = GenerationType.IDENTITY)**
+   * Automatically generates the `id` value.
+ * **@Enumerated(EnumType.STRING)**
+   * Maps the `growthStage` enum to a string in the database.
+ * **@Column**
+   * Specifies constraints for the columns, including nullable = false and custom column definitions (e.g., setting default values for created).
+
+
+
+
+
+
+```java
+package plantsim.PlantSimulatorAPI;
+
+import java.time.Duration;
+import java.time.LocalDateTime;
+import java.util.NavigableMap;
+import java.util.TreeMap;
+
+import jakarta.persistence.Column;
+import jakarta.persistence.Entity;
+import jakarta.persistence.EnumType;
+import jakarta.persistence.Enumerated;
+import jakarta.persistence.GeneratedValue;
+import jakarta.persistence.GenerationType;
+import jakarta.persistence.Id;
+import jakarta.persistence.Table;
+import jakarta.validation.constraints.Max;
+import jakarta.validation.constraints.Min;
+
+@Entity
+@Table(name = "plant")
+public class Plant {
+
+	private static final int HYDRATION_DECAY_RATE = 6;
+	private static final int NUTRIENT_DECAY_RATE = 2;
+
+	private static final NavigableMap growthStageMap = new TreeMap<>();
+
+	static {
+		growthStageMap.put(0L, GrowthStage.SEED);
+		growthStageMap.put(1L, GrowthStage.GERMINATION);
+		growthStageMap.put(2L, GrowthStage.SEEDLING);
+		growthStageMap.put(5L, GrowthStage.VEGETATIVE);
+		growthStageMap.put(24L, GrowthStage.FINAL);
+	}
+
+	@Id
+	@GeneratedValue(strategy = GenerationType.IDENTITY)
+	private Long id;
+
+	@Column(nullable = false)
+	private String name;
+
+	@Enumerated(EnumType.STRING)
+	@Column(nullable = false)
+	private GrowthStage growthStage = GrowthStage.SEED;
+
+	@Column(columnDefinition = "TIMESTAMP DEFAULT CURRENT_TIMESTAMP")
+	private LocalDateTime created;
+
+	@Min(value = 0, message = "health must be at least 0")
+	@Max(value = 100, message = "health must not exceed 100")
+	@Column(nullable = false)
+	private int health = 100;
+
+	@Min(value = 0, message = "hydration must be at least 0")
+	@Max(value = 100, message = "hydration must not exceed 100")
+	@Column(nullable = false)
+	private int hydration = 100;
+
+	@Min(value = 0, message = "nutrient level must be at least 0")
+	@Max(value = 100, message = "nutrient level must not exceed 100")
+	@Column(nullable = false)
+	private int nutrientLevel = 100;
+
+	@Column(nullable = false)
+	private LocalDateTime lastWatered = LocalDateTime.now();
+
+	@Column(nullable = false)
+	private LocalDateTime lastFertilized = LocalDateTime.now();
+
+	public Long getId() {
+		return this.id;
+	}
+
+	public void setId(Long id) {
+		this.id = id;
+	}
+
+	public String getName() {
+		return this.name;
+	}
+
+	public void setName(String name) {
+		this.name = name;
+	}
+
+	public GrowthStage getGrowthStage() {
+		long hoursSinceCreated = Duration.between(created, LocalDateTime.now()).toHours();
+		return growthStageMap.floorEntry(hoursSinceCreated).getValue();
+	}
+
+	public int getHealth() {
+		int hydrationWeight = 90;
+		int fertilizationWeight = 10;
+
+		int weightedHydration = (getHydration() * hydrationWeight) / 100;
+		int weightedFertilization = (getNutrientLevel() * fertilizationWeight) / 100;
+
+		return weightedHydration + weightedFertilization;
+	}
+
+	public void setHealth(int health) {
+		this.health = health;
+	}
+
+	public int getNutrientLevel() {
+		long minutesSinceLastFertilize = Duration.between(lastFertilized, LocalDateTime.now()).toMinutes();
+		return Math.max(0, hydration - (int) (minutesSinceLastFertilize * NUTRIENT_DECAY_RATE));
+	}
+
+	public void setNutrientLevel(int nutrientLevel) {
+		this.nutrientLevel = nutrientLevel;
+	}
+
+	public int getHydration() {
+		long minutesSinceLastWater = Duration.between(lastWatered, LocalDateTime.now()).toMinutes();
+		return Math.max(0, hydration - (int) (minutesSinceLastWater * HYDRATION_DECAY_RATE));
+	}
+
+	public void setHydration(int hydration) {
+		this.hydration = hydration;
+	}
+
+	public LocalDateTime getLastWatered() {
+		return this.lastWatered;
+	}
+
+	public LocalDateTime getLastFertilized() {
+		return this.lastFertilized;
+	}
+
+	public Plant() {
+	}
+
+	public void waterPlant() {
+		this.hydration = Math.min(this.hydration + 20, 100);
+		this.lastWatered = LocalDateTime.now();
+	}
+
+	public void fertilizePlant() {
+		this.nutrientLevel = Math.min(this.nutrientLevel + 20, 100);
+		this.lastFertilized = LocalDateTime.now();
+	}
+
+}
+```
+   
+
+## Defining the API Controller
+
+```java
+package plantsim.PlantSimulatorAPI;
+
+import java.util.List;
+
+import org.springframework.beans.factory.annotation.Autowired;
+import org.springframework.http.ResponseEntity;
+import org.springframework.web.bind.annotation.DeleteMapping;
+import org.springframework.web.bind.annotation.GetMapping;
+import org.springframework.web.bind.annotation.PathVariable;
+import org.springframework.web.bind.annotation.PostMapping;
+import org.springframework.web.bind.annotation.PutMapping;
+import org.springframework.web.bind.annotation.RequestBody;
+import org.springframework.web.bind.annotation.RestController;
+
+import jakarta.validation.Valid;
+
+@RestController
+public class PlantController {
+
+	@Autowired
+	private PlantRepository plantRepository;
+
+	@GetMapping("/plant")
+	public List getPlants() {
+		return plantRepository.findAll();
+	}
+
+	@PostMapping("/plant")
+	public ResponseEntity createPlant(@Valid @RequestBody Plant plant) {
+		Plant newPlant = plantRepository.save(plant);
+		return ResponseEntity.ok(newPlant);
+	}
+
+	@DeleteMapping("/plants/{id}")
+	public ResponseEntity deletePlant(@PathVariable Long id) {
+		if (!plantRepository.existsById(id)) {
+			return ResponseEntity.notFound().build();
+		}
+		plantRepository.deleteById(id);
+		return ResponseEntity.ok("Plant deleted");
+	}
+
+	@PutMapping("/plant/{id}")
+	public ResponseEntity updatePlant(@PathVariable Long id, @Valid @RequestBody Plant updatedPlant) {
+		return plantRepository.findById(id).map(plant -> {
+			plant.setName(updatedPlant.getName());
+			Plant savedPlant = plantRepository.save(plant);
+			return ResponseEntity.ok(savedPlant);
+		}).orElseGet(() -> ResponseEntity.notFound().build());
+	}
+
+	@PutMapping("/plant/{id}/water")
+	public ResponseEntity waterPlant(@PathVariable Long id) {
+		return plantRepository.findById(id).map(plant -> {
+			plant.waterPlant();
+			Plant savedPlant = plantRepository.save(plant);
+			return ResponseEntity.ok(savedPlant);
+		}).orElseGet(() -> ResponseEntity.notFound().build());
+	}
+
+	@PutMapping("/plant/{id}/fertilize")
+	public ResponseEntity fertilizePlant(@PathVariable Long id) {
+		return plantRepository.findById(id).map(plant -> {
+			plant.waterPlant();
+			Plant savedPlant = plantRepository.save(plant);
+			return ResponseEntity.ok(savedPlant);
+		}).orElseGet(() -> ResponseEntity.notFound().build());
+	}
+}
+```
+   
+
+
diff --git a/container/site/content/posts/whiteboard/index.md b/container/site/content/posts/whiteboard/index.md
new file mode 100644
index 0000000..ac99509
--- /dev/null
+++ b/container/site/content/posts/whiteboard/index.md
@@ -0,0 +1,74 @@
++++
+categories = ["build"]
+tags = [""]
+date = 2025-05-02T12:00:00-06:00
+description = ""
+draft = false
+slug = "whiteboard"
+title = "🧼 Whiteboard Build"
+author = "nicholas"
++++
+
+I need a sturdy, medium-sized whiteboard, and I would not like to pay much money. Mostly because I won't feel as bad when it is inevitably damaged or degraded as is inevitable with any cheap whiteboard. I can either buy a very small whiteboard of poor build quality, or I can make a fairly large one for roughly the same price. Easy decision.
+
+---
+
+## Plan
+I will buy a piece of hardboard with a smooth gloss whiteboard finish. Uncut, this would give me a 8′ × 4′ whiteboard, which is enormous for the space I have. 3′ × 3′ will be ideal.
+
+
+{{< image 
+    src="images/home-depot-tile-board.jpg" 
+    caption="Home Depot whiteboard material" >}}
+
+I will have a *Home Depot* employee to cut the board for me in the store. It will be divided into 4 pieces:
+
+- (1) 3′ × 3′ — **main whiteboard**
+- (2) 2.5′ × 3′ — **bonus whiteboards**
+- (1) 1′ × 8′ — **TBD**
+
+--- 
+
+{{< image 
+    src="images/home-depot-store-boards.jpg" 
+    caption="Home Depot store cart" >}}
+
+### Materials
+- Carpenter’s square  
+- Permanent marker  
+- Drill  
+- Drill bit (sized for anchor screws)  
+- Drywall anchors
+- Pin punch
+- Hammer
+- Washers
+- Screwdriver
+- Bubble level
+
+### Procedure 
+
+1. **Mark Pilot Hole Locations**  
+   Measure and mark pilot hole positions 1.5" from each edge in all four corners of the board.
+
+2. **Drill Pilot Holes in Board**  
+   Drill holes at marked positions using drill bit sized for anchor screw shank.
+
+3. **Transfer Hole Positions to Wall**  
+   Hold board in position on wall. Use level to align board. Using board's holes as a template, tap small pin punch through each hole to mark wall for drywall anchors.
+
+4. **Install Drywall Anchors**  
+   Remove board. Install plastic drywall anchors at marked wall locations.
+
+5. **Prepare Mounting Screws**  
+   Slide a washer onto each of four screws. Pre-thread screws into board so that the tips protrude ~ 1/16" from back surface. This will make alignment easier during mounting.
+
+6. **Mount the Board**  
+   Align board with drywall anchors and drive screws into plastic anchors at all four corners.
+
+---
+
+## Images
+
+{{< gallerynew name="whiteboard-gallery" >}}
+
+Done.
\ No newline at end of file
diff --git a/container/site/content/posts/whiteboard/whiteboard-gallery.yaml b/container/site/content/posts/whiteboard/whiteboard-gallery.yaml
new file mode 100644
index 0000000..eee6953
--- /dev/null
+++ b/container/site/content/posts/whiteboard/whiteboard-gallery.yaml
@@ -0,0 +1,24 @@
+images:
+  - src: "images/01-whiteboard-finished.JPG"
+    alt: "Mounted whiteboard"
+    caption: "Whiteboard installed"
+
+  - src: "images/02-washers-finished.JPG"
+    alt: "Washers installed with screws"
+    caption: "Washers in place"
+
+  - src: "images/03-screw-assembly.JPG"
+    alt: "Screw and washer assembly"
+    caption: "Screw assembly"
+
+  - src: "images/04-drywall-anchor.JPG"
+    alt: "Drywall anchor inserted"
+    caption: "Anchor installed"
+
+  - src: "images/05-drill-hole.JPG"
+    alt: "Drilling a hole in the wall"
+    caption: "Drilling wall"
+
+  - src: "images/06-mark-drill-holes.JPG"
+    alt: "Marks for drilling holes"
+    caption: "Marking drill points"
diff --git a/container/site/content/posts/wildlife-stream/index.md b/container/site/content/posts/wildlife-stream/index.md
new file mode 100644
index 0000000..6dec903
--- /dev/null
+++ b/container/site/content/posts/wildlife-stream/index.md
@@ -0,0 +1,342 @@
++++
+categories = ["software","build"]
+tags = ["docker"]
+date = 2024-08-21T18:13:24Z
+description = ""
+draft = false
+slug = "wildlife-stream"
+title = "📷 Wildlife Cam Livestream with Frigate + Nikon Z50"
+author = "nicholas"
++++
+
+I want to capture images and video of animals that visit my deck (mostly squirrels, woodpeckers, and finches). Previously, I have used an IP camera to accomplish this, and while satisfying in a technical sense, the images were of too low quality to be of much artistic interest to me. The image that IP cameras produce are typically of very large field of view, which makes the subjects I am interested in appear very small. It has the distinct look of a security camera which is not associated with beauty or visual interest. I will need to use a better camera.
+
+{{< image 
+    src="images/apartment-inside.jpg" 
+    caption="Apartment view" >}}
+
+## Equipment
+* **Camera**
+  * I replaced my IP camera with an interchangeable-lens type camera – the Nikon z50, with a Nikkor Z DX 50-250mm lens. The longer focal length range 50-250mm will allow me to place the camera far away from the subject and nearer to the computer that will capture the video and process it. This setup gives me plenty of flexibility, which is useful because the project is more artistic than utilitarian / well-defined – and subject to the whims of the aesthetic preferences of the day.
+* **Capture Device**
+  * I need a way to get the video feed to the server so I can process it, so I bought a USB HDMI capture device – Elgato Camlink 4k.
+ * **Dummy Battery**
+  * I am using a dummy battery that supplies the camera with the same voltage and battery identifier signals as its proprietary battery, basically a 120v power adapter. This allows me to power the camera indefinitely.
+
+
+## The Scene
+Here is the scene I am attempting to capture. I have placed a small container on the ledge of the deck railing that I fill each day with a handful of peanuts. This is where the animals come to eat. I have a whole cart of houseplants to contend with that may occlude the view, but I can make it work.
+
+{{< image 
+    src="images/hinoki-bonsai.jpg" 
+    caption="Squirrel scene" >}}
+
+I have placed the camera something like 15 ft. away from the subject – right next to my server. Here is what this looks like:
+
+
+{{< image 
+    src="images/camera-pov-1.jpg" 
+    caption="Camera POV" >}}
+
+{{< image 
+    src="images/camera-pov-2.jpg" 
+    caption="Camera POV 2" >}}
+
+## Software
+
+Here I run `lsusb` to be sure the system recognizes the HDMI capture card. This is successful
+
+
+
+
+```shell
+lsusb
+Bus 002 Device 108: ID 0fd9:007b Elgato Systems GmbH Cam Link 4K
+Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
+Bus 001 Device 002: ID 8087:0aa7 Intel Corp. Wireless-AC 3168 Bluetooth
+Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
+```
+
+
+Now I see where the video is mounted.
+
+```shell
+ls /dev/video*
+/dev/video0  
+/dev/video1
+```
+
+There are two video devices – `video0` and `video1`. I will need to determine which is the video feed I am interested in. I will run a Video4Linux `v4l2-ctlcommand` to discover the capabilities of each device.
+
+### device video0
+```shell
+/dev/video0  
+    v4l2-ctl --device=/dev/video0 --all
+    Driver Info:
+        Driver name      : uvcvideo
+        Card type        : Cam Link 4K: Cam Link 4K
+        Bus info         : usb-0000:00:14.0-2
+        Driver version   : 6.1.55
+        Capabilities     : 0x84a00001
+                Video Capture
+                Metadata Capture
+                Streaming
+                Extended Pix Format
+                Device Capabilities
+        Device Caps      : 0x04200001
+                Video Capture
+                Streaming
+                Extended Pix Format
+Media Driver Info:
+        Driver name      : uvcvideo
+        Model            : Cam Link 4K: Cam Link 4K
+        Serial           : FX02M2A10475
+        Bus info         : usb-0000:00:14.0-2
+        Media version    : 6.1.55
+        Hardware revision: 0x00000100 (256)
+        Driver version   : 6.1.55
+Interface Info:
+        ID               : 0x03000002
+        Type             : V4L Video
+Entity Info:
+        ID               : 0x00000001 (1)
+        Name             : Cam Link 4K: Cam Link 4K
+        Function         : V4L2 I/O
+        Flags            : default
+        Pad 0x01000007   : 0: Sink
+          Link 0x02000010: from remote pad 0x100000a of entity 'Extension 3' (Video Pixel Formatter): Data, Enabled, Immutable
+Priority: 2
+Video input : 0 (Input 1: ok)
+Format Video Capture:
+        Width/Height      : 1920/1080
+        Pixel Format      : 'NV12' (Y/UV 4:2:0)
+        Field             : None
+        Bytes per Line    : 1920
+        Size Image        : 3110400
+        Colorspace        : sRGB
+        Transfer Function : Rec. 709
+        YCbCr/HSV Encoding: Rec. 709
+        Quantization      : Default (maps to Limited Range)
+        Flags             :
+Crop Capability Video Capture:
+        Bounds      : Left 0, Top 0, Width 1920, Height 1080
+        Default     : Left 0, Top 0, Width 1920, Height 1080
+        Pixel Aspect: 1/1
+Selection Video Capture: crop_default, Left 0, Top 0, Width 1920, Height 1080, Flags:
+Selection Video Capture: crop_bounds, Left 0, Top 0, Width 1920, Height 1080, Flags:
+Streaming Parameters Video Capture:
+        Capabilities     : timeperframe
+        Frames per second: 23.976 (27021/1127)
+        Read buffers     : 0
+
+User Controls
+
+                     brightness 0x00980900 (int)    : min=0 max=255 step=1 default=128 value=128
+                       contrast 0x00980901 (int)    : min=0 max=255 step=1 default=128 value=128
+                     saturation 0x00980902 (int)    : min=0 max=255 step=1 default=128 value=128
+                            hue 0x00980903 (int)    : min=0 max=255 step=1 default=128 value=128
+```
+### device video1
+```shell
+/dev/video1
+    v4l2-ctl --device=/dev/video1 --all
+    Driver Info:
+        Driver name      : uvcvideo
+        Card type        : Cam Link 4K: Cam Link 4K
+        Bus info         : usb-0000:00:14.0-2
+        Driver version   : 6.1.55
+        Capabilities     : 0x84a00001
+                Video Capture
+                Metadata Capture
+                Streaming
+                Extended Pix Format
+                Device Capabilities
+        Device Caps      : 0x04a00000
+                Metadata Capture
+                Streaming
+                Extended Pix Format
+Media Driver Info:
+        Driver name      : uvcvideo
+        Model            : Cam Link 4K: Cam Link 4K
+        Serial           : FX02M2A10475
+        Bus info         : usb-0000:00:14.0-2
+        Media version    : 6.1.55
+        Hardware revision: 0x00000100 (256)
+        Driver version   : 6.1.55
+Interface Info:
+        ID               : 0x03000005
+        Type             : V4L Video
+Entity Info:
+        ID               : 0x00000004 (4)
+        Name             : Cam Link 4K: Cam Link 4K
+        Function         : V4L2 I/O
+Priority: 2
+Format Metadata Capture:
+        Sample Format   : 'UVCH' (UVC Payload Header Metadata)
+        Buffer Size     : 10240
+```
+
+Both of these outputs indicate they refer to the same device – Cam Link 4k, but `/dev/video0` looks like the video device node that I can use to access the device's video stream.
+`/dev/video0` lists "Video Capture" under both `Capabilities` and `Device Caps`, confirming it can capture video.
+`/dev/video1` lists only "Metadata Capture", which means it is only capturing metadata and not the video itself.
+
+## Docker
+I will be using docker to run the NVR software (frigate). Most of the configuration file is defaults, but one thing I will need to do is pass the video capture device to the docker container.
+
+```yaml
+services:
+  frigate:
+    container_name: frigate
+    privileged: true
+    restart: unless-stopped
+    image: ghcr.io/blakeblackshear/frigate:stable
+    shm_size: "512mb"
+    devices:
+      - /dev/video0:/dev/video0
+      - /dev/dri/renderD128 # for intel hwaccel
+    volumes:
+      - /etc/localtime:/etc/localtime:ro
+      - ./config:/config
+      - type: tmpfs # Optional: 1GB of memory, reduces SSD/SD Card wear
+        target: /tmp/cache
+        tmpfs:
+          size: 1000000000
+    ports:
+      - "8971:8971" # web interface authenticated
+      - "5000:5000" # web interface
+      - "8554:8554" # RTSP feeds
+      - "8555:8555/tcp" # WebRTC over tcp
+      - "8555:8555/udp" # WebRTC over udp
+      - "1984:1984" # go2rtc
+```
+
+## Frigate Configuration
+Frigate requires its own configuration file: /config/config.yml. Using the built-in go2rtc tool I will publish a new video stream of the USB capture device /dev/video0 that I will ingest as a camera in frigate. First I will need some information about the video stream offered by the capture device.
+
+I will use a v4l2-ctl command with the long option --list-formats-ext to display information about the video formats supported by my capture device. The output shows supported resolutions, pixel formats, and framerate. I will need this information to define my camera in frigate configuration.
+
+```shell
+    v4l2-ctl --device=/dev/video1 --list-formats-ext
+    ioctl: VIDIOC_ENUM_FMT
+        Type: Video Capture
+
+        [0]: 'YUYV' (YUYV 4:2:2)
+                Size: Discrete 1920x1080
+                        Interval: Discrete 0.042s (23.976 fps)
+        [1]: 'NV12' (Y/UV 4:2:0)
+                Size: Discrete 1920x1080
+                        Interval: Discrete 0.042s (23.976 fps)
+```
+
+
+
+
+This output pertains to a line I must add to the configuration file
+
+`ffmpeg:device?...`
+
+
+| Variable       | Value        | Description             |
+| -------------- | ------------ | ----------------------- |
+| `video`        | `dev/video0` | USB capture device path |
+| `input_format` | `nv12`       | Color format            |
+| `video_size`   | `1920x1080`  | Input resolution        |
+| `video`        | `h264`       | Video codec             |
+| `hardware`     | `vaapi`      | Hardware acceleration   |
+
+I have named my stream *nikonz50* and defined it as a ffmpeg device using the table of variables above. I configured frigate to detect and record only animals.
+
+```yaml
+go2rtc:
+  streams:
+    nikonz50:
+       ffmpeg:device?video=/dev/video0&input_format=nv12&video_size=1920x1080#video=h264#hardware=vaapi
+
+cameras:
+  nikonz50:
+    objects:
+      track:
+        - animal
+    ffmpeg:
+      inputs:
+        - path: rtsp://127.0.0.1:8554/nikonz50
+          roles:
+            - record
+            - detect
+      hwaccel_args: preset-vaapi
+      input_args: -tag:v hvc1
+      
+record:
+  enabled: true
+  events:
+    pre_capture: 2
+    post_capture: 2
+    objects:
+      - animal
+
+snapshots:
+  enabled: true
+  
+detect:
+  enabled: true
+  width: 1920
+  height: 1080
+
+detectors:
+  ov:
+    type: openvino
+    device: AUTO
+    model:
+      path: /openvino-model/ssdlite_mobilenet_v2.xml
+
+model:
+  width: 300
+  height: 300
+  input_tensor: nhwc
+  input_pixel_format: bgr
+  labelmap_path: /openvino-model/coco_91cl_bkgr.txt
+  labelmap:
+    15: animal
+    16: animal
+    17: animal
+version: 0.14
+```
+
+Now that I have a `docker-compose.yml` file and a frigate `config.yml` file I can start up Frigate and see how it looks. I run the compose command with short option `-d` (detached mode) to run the container in the background.
+
+```shell 
+sudo docker compose up -d
+```
+
+**It works!**
+
+{{< image 
+    src="images/frigate-ui.PNG" 
+    caption="Frigate UI" >}}
+## Object Detection
+
+Frigate is capable of running object detection on the camera streams. Since my machine is running on an intel CPU, I can configure its object detection to use OpenVino, (Open Visual Inference and Neural Network Optimization). This uses Intel's integrated GPU to offload the work of inference from the CPU to the GPU. This improves performance on my machine a great deal. If I used CPU detector my CPU Intel Pentium Gold G5400 would be pegged at 100% utilization and the detection latency would be abysmal.
+
+{{< image 
+    src="images/detect-squirrel.jpg" 
+    caption="Detect squirrel" >}}
+
+## Recording
+I have configured frigate to capture a video each time an animal is detected. Here is one such video.
+
+{{< video
+  src="videos/squirrel.mp4"
+  width="100%"
+>}}
+
+## Improvements
+My CPU is my biggest bottleneck. It is possible to increase stream resolution to `2160p` but this results in unacceptable CPU utilization. One potential solution is acquiring a secondhand Optiplex Micro or some other small computer dedicated to video streaming. I would not mind if the CPU usage was excessive. Facebook Marketplace has many that contain CPUs that exceed the specs of my current server CPU, all for ~$65. 
+Another option is to upgrade my current CPU, but I do not want it to get any hotter as it hosts all my HDDs. I do not know. I may make an edit to this if I upgrade. The project is just for fun and not serious. 4k stream can wait.
+
+{{< image 
+    src="images/usage.PNG" 
+    caption="Performance" >}}
+
+Done.
+
+**UPDATE 2025-05-01: I have upgraded the streaming computer to a miniature computer**
diff --git a/container/site/hugo.toml b/container/site/hugo.toml
new file mode 100644
index 0000000..7ef7f28
--- /dev/null
+++ b/container/site/hugo.toml
@@ -0,0 +1,620 @@
+baseURL = "https://log.nicholas.uuard.com"
+# Change the default theme to be use when building the site with Hugo
+theme = ["LoveIt"]
+# timeout
+timeout = 60000
+# website title
+title = "log - Nicholas Ward"
+# language code ["en", "zh-CN", "fr", "pl", ...]
+languageCode = "en"
+# language name ["English", "简体中文", "Français", "Polski", ...]
+languageName = "English"
+# whether to include Chinese/Japanese/Korean
+hasCJKLanguage = false
+# copyright description used only for seo schema
+copyright = ""
+# whether to use robots.txt
+enableRobotsTXT = true
+# whether to use git commit log
+enableGitInfo = false
+# whether to use emoji code
+enableEmoji = true
+# ignore some build errors
+ignoreErrors = ["error-remote-getjson", "error-missing-instagram-accesstoken"]
+# Pagination config
+[pagination]
+  disableAliases = false
+  pagerSize = 10
+  path = "page"
+# Menu config
+[menu]
+ [[menu.main]]
+    weight = 1
+    identifier = "about"
+    pre = ""
+    post = ""
+    name = "About"
+    url = "/about/"
+    title = "about"
+  [[menu.main]]
+    weight = 2
+    identifier = "posts"
+    pre = ""
+    post = ""
+    name = "Posts"
+    url = "/posts/"
+    title = "posts"
+  [[menu.main]]
+    weight = 3
+    identifier = "categories"
+    pre = ""
+    post = ""
+    name = "Categories"
+    url = "/categories/"
+    title = "categories"
+  [[menu.main]]
+    weight = 4
+    identifier = "tags"
+    pre = ""
+    post = ""
+    name = "Tags"
+    url = "/tags/"
+    title = "tags"
+ 
+[params]
+  # site default theme ["auto", "light", "dark"]
+  defaultTheme = "auto"
+  # public git repo url only then enableGitInfo is true
+  gitRepo = ""
+
+  # file host
+  filesBase = "https://files.web-log.uuard.com"
+
+  #  which hash function used for SRI, when empty, no SRI is used
+  # ["sha256", "sha384", "sha512", "md5"]
+  fingerprint = ""
+  #  date format
+  dateFormat = "2006-01-02"
+  # website title for Open Graph and Twitter Cards
+  title = "log"
+  # website description for RSS, SEO, Open Graph and Twitter Cards
+  description = "Personal blog of Nicholas Ward"
+  # website images for Open Graph and Twitter Cards
+  images = ["/logo.png"]
+# Author config
+  [params.author]
+    name = "Nicholas Ward"
+    email = "nicholaspward@outlook.com"
+    link = "https://nicholas.uuard.com"
+  # Header config
+  [params.header]
+    # desktop header mode ["fixed", "normal", "auto"]
+    desktopMode = "fixed"
+    # mobile header mode ["fixed", "normal", "auto"]
+    mobileMode = "auto"
+    #  Header title config
+    [params.header.title]
+      # URL of the LOGO
+      logo = "/W.svg"
+      # title name
+      name = "log"
+      # you can add extra information before the name (HTML format is supported), such as icons
+      # pre = "<i class='far fa-kiss-wink-heart fa-fw' aria-hidden='true'></i>"
+      # you can add extra information after the name (HTML format is supported), such as icons
+      post = "<span style='font-weight:lighter;font-size:small'>by nicholas ward</span>"
+      #  whether to use typeit animation for title name
+      typeit = false
+  # Footer config
+  [params.footer]
+    enable = true
+    #  Custom content (HTML format is supported)
+    custom = ''
+    #  whether to show Hugo and theme info
+    hugo = false
+    #  whether to show copyright info
+    copyright = true
+    #  whether to show the author
+    author = true
+    # Site creation time
+    since = 2024
+    # ICP info only in China (HTML format is supported)
+    icp = ""
+    # license info (HTML format is supported)
+    # license = '<a rel="license external nofollow noopener noreffer" href="https://creativecommons.org/licenses/by-nc/4.0/" target="_blank">CC BY-NC 4.0</a>'
+  #  Section (all posts) page config
+  [params.section]
+    # special amount of posts in each section page
+    paginate = 20
+    # date format (month and day)
+    dateFormat = "01-02"
+    # amount of RSS pages
+    rss = 10
+  #  List (category or tag) page config
+  [params.list]
+    # special amount of posts in each list page
+    paginate = 20
+    # date format (month and day)
+    dateFormat = "01-02"
+    # amount of RSS pages
+    rss = 10
+  #  App icon config
+  [params.app]
+    # optional site title override for the app when added to an iOS home screen or Android launcher
+    title = "My cool site"
+    # whether to omit favicon resource links
+    noFavicon = false
+    # modern SVG favicon to use in place of older style .png and .ico files
+    svgFavicon = ""
+    # Android browser theme color
+    themeColor = "#ffffff"
+    # Safari mask icon color
+    iconColor = "#5bbad5"
+    # Windows v8-10 tile color
+    tileColor = "#da532c"
+  #  Search config
+  [params.search]
+    enable = true
+    # type of search engine ["lunr", "algolia"]
+    type = "lunr"
+    # max index length of the chunked content
+    contentLength = 4000
+    # placeholder of the search bar
+    placeholder = ""
+    #  max number of results length
+    maxResultLength = 10
+    #  snippet length of the result
+    snippetLength = 30
+    #  HTML tag name of the highlight part in results
+    highlightTag = "em"
+    #  whether to use the absolute URL based on the baseURL in search index
+    absoluteURL = false
+    [params.search.algolia]
+      index = ""
+      appID = ""
+      searchKey = ""
+  # Home page config
+  [params.home]
+    #  amount of RSS pages
+    rss = 10
+    # Home page profile
+    [params.home.profile]
+      enable = false
+      # Gravatar Email for preferred avatar in home page
+      gravatarEmail = ""
+      # URL of avatar shown in home page
+      avatarURL = "/images/avatar.png"
+      #  title shown in home page (HTML format is supported)
+      title = ""
+      # subtitle shown in home page (HTML format is supported)
+      subtitle = "This is My New Hugo Site"
+      # whether to use typeit animation for subtitle
+      typeit = true
+      # whether to show social links
+      social = true
+      #  disclaimer (HTML format is supported)
+      disclaimer = ""
+    # Home page posts
+    [params.home.posts]
+      enable = true
+      # special amount of posts in each home posts page
+      paginate = 6
+      #  replaced with hiddenFromHomePage in params.page
+      # default behavior when you don't set "hiddenFromHomePage" in front matter
+      defaultHiddenFromHomePage = false
+  # Social config about the author
+  [params.social]
+    GitHub = "xxxx"
+    Linkedin = ""
+    X = "xxxx" #
+    Twitter = "" #
+    Instagram = "xxxx"
+    Facebook = "xxxx"
+    Telegram = "xxxx"
+    Medium = ""
+    Gitlab = ""
+    Youtubelegacy = ""
+    Youtubecustom = ""
+    Youtubechannel = ""
+    Tumblr = ""
+    Quora = ""
+    Keybase = ""
+    Pinterest = ""
+    Reddit = ""
+    Codepen = ""
+    FreeCodeCamp = ""
+    Bitbucket = ""
+    Stackoverflow = ""
+    Weibo = ""
+    Odnoklassniki = ""
+    VK = ""
+    Flickr = ""
+    Xing = ""
+    Snapchat = ""
+    Soundcloud = ""
+    Spotify = ""
+    Bandcamp = ""
+    Paypal = ""
+    Fivehundredpx = ""
+    Mix = ""
+    Goodreads = ""
+    Lastfm = ""
+    Foursquare = ""
+    Hackernews = ""
+    Kickstarter = ""
+    Patreon = ""
+    Steam = ""
+    Twitch = ""
+    Strava = ""
+    Skype = ""
+    Whatsapp = ""
+    Zhihu = ""
+    Douban = ""
+    Angellist = ""
+    Slidershare = ""
+    Jsfiddle = ""
+    Deviantart = ""
+    Behance = ""
+    Dribbble = ""
+    Wordpress = ""
+    Vine = ""
+    Googlescholar = ""
+    Researchgate = ""
+    Mastodon = ""
+    Thingiverse = ""
+    Devto = ""
+    Gitea = ""
+    XMPP = ""
+    Matrix = ""
+    Bilibili = ""
+    Discord = ""
+    DiscordInvite = ""
+    Lichess = ""
+    ORCID = ""
+    Pleroma = ""
+    Kaggle = ""
+    MediaWiki = ""
+    Plume = ""
+    HackTheBox = ""
+    RootMe = ""
+    Malt = "" #
+    TikTok = "" #
+    TryHackMe = "" #
+    Codeberg = "" #
+    HuggingFace = "" #
+    Threads = "" #
+    Phone = ""
+    Email = "xxxx@xxxx.com"
+    RSS = true #
+  #  Page global config
+  [params.page]
+    #  whether to hide a page from home page
+    hiddenFromHomePage = false
+    #  whether to hide a page from search results
+    hiddenFromSearch = false
+    #  whether to enable twemoji
+    twemoji = false
+    # whether to enable lightgallery
+    lightgallery = true
+    #  whether to enable the ruby extended syntax
+    ruby = true
+    #  whether to enable the fraction extended syntax
+    fraction = true
+    #  whether to enable the fontawesome extended syntax
+    fontawesome = true
+    # whether to show link to Raw Markdown content of the content
+    linkToMarkdown = true
+    #  whether to show the full text content in RSS
+    rssFullText = false
+    #  Table of the contents config
+    [params.page.toc]
+      # whether to enable the table of the contents
+      enable = true
+      #  whether to keep the static table of the contents in front of the post
+      keepStatic = false
+      # whether to make the table of the contents in the sidebar automatically collapsed
+      auto = true
+    #  KaTeX mathematical formulas
+    [params.page.math]
+      enable = true
+      #  default inline delimiter is $ ... $ and \( ... \)
+      inlineLeftDelimiter = ""
+      inlineRightDelimiter = ""
+      #  default block delimiter is $$ ... $$, \[ ... \], \begin{equation} ... \end{equation} and some other functions
+      blockLeftDelimiter = ""
+      blockRightDelimiter = ""
+      # KaTeX extension copy_tex
+      copyTex = true
+      # KaTeX extension mhchem
+      mhchem = true
+    #  Code config
+    [params.page.code]
+      # whether to show the copy button of the code block
+      copy = true
+      # the maximum number of lines of displayed code by default
+      maxShownLines = 50
+    #  Mapbox GL JS config
+    [params.page.mapbox]
+      # access token of Mapbox GL JS
+      accessToken = ""
+      # style for the light theme
+      lightStyle = "mapbox://styles/mapbox/light-v10?optimize=true"
+      # style for the dark theme
+      darkStyle = "mapbox://styles/mapbox/dark-v10?optimize=true"
+      # whether to add NavigationControl
+      navigation = true
+      # whether to add GeolocateControl
+      geolocate = true
+      # whether to add ScaleControl
+      scale = true
+      # whether to add FullscreenControl
+      fullscreen = true
+    #  social share links in post page
+    [params.page.share]
+      enable = false
+      X = false #
+      Twitter = false #
+      Threads = false #
+      Facebook = false
+      Linkedin = false
+      Whatsapp = false
+      Pinterest = false
+      Tumblr = false
+      HackerNews = false
+      Reddit = false
+      VK = false
+      Buffer = false
+      Xing = false
+      Line = false
+      Instapaper = false
+      Pocket = false
+      Flipboard = false
+      Weibo = false
+      Blogger = false
+      Baidu = false
+      Odnoklassniki = false
+      Evernote = false
+      Skype = false
+      Trello = false
+      Diaspora = false #
+      Mix = false
+      Telegram = false #
+    #  Comment config
+    [params.page.comment]
+      enable = false
+      # Disqus comment config
+      [params.page.comment.disqus]
+        #
+        enable = false
+        # Disqus shortname to use Disqus in posts
+        shortname = ""
+      # Gitalk comment config
+      [params.page.comment.gitalk]
+        #
+        enable = false
+        owner = ""
+        repo = ""
+        clientId = ""
+        clientSecret = ""
+      # Valine comment config
+      [params.page.comment.valine]
+        enable = false
+        appId = ""
+        appKey = ""
+        placeholder = ""
+        avatar = "mp"
+        meta= ""
+        pageSize = 10
+        # automatically adapt the current theme i18n configuration when empty
+        lang = ""
+        visitor = true
+        recordIP = true
+        highlight = true
+        enableQQ = false
+        serverURLs = ""
+        #  emoji data file name, default is "google.yml"
+        # ["apple.yml", "google.yml", "facebook.yml", "twitter.yml"]
+        # located in "themes/LoveIt/assets/lib/valine/emoji/" directory
+        # you can store your own data files in the same path under your project:
+        # "assets/lib/valine/emoji/"
+        emoji = ""
+      # Facebook comment config
+      [params.page.comment.facebook]
+        enable = false
+        width = "100%"
+        numPosts = 10
+        appId = ""
+        # automatically adapt the current theme i18n configuration when empty
+        languageCode = ""
+      #  Telegram comments config
+      [params.page.comment.telegram]
+        enable = false
+        siteID = ""
+        limit = 5
+        height = ""
+        color = ""
+        colorful = true
+        dislikes = false
+        outlined = false
+      #  Commento comment config
+      [params.page.comment.commento]
+        enable = false
+      #  utterances comment config
+      [params.page.comment.utterances]
+        enable = false
+        # owner/repo
+        repo = ""
+        issueTerm = "pathname"
+        label = ""
+        lightTheme = "github-light"
+        darkTheme = "github-dark"
+      # giscus comment config (https://giscus.app/)
+      [params.page.comment.giscus]
+        # You can refer to the official documentation of giscus to use the following configuration.
+        enable = false
+        repo = ""
+        repoId = ""
+        category = "Announcements"
+        categoryId = ""
+        # automatically adapt the current theme i18n configuration when empty
+        lang = ""
+        mapping = "pathname"
+        reactionsEnabled = "1"
+        emitMetadata = "0"
+        inputPosition = "bottom"
+        lazyLoading = false
+        lightTheme = "light"
+        darkTheme = "dark"
+    #  Third-party library config
+    [params.page.library]
+      [params.page.library.css]
+        # someCSS = "some.css"
+        # located in "assets/"
+        # Or
+        # someCSS = "https://cdn.example.com/some.css"
+      [params.page.library.js]
+        # someJavascript = "some.js"
+        # located in "assets/"
+        # Or
+        # someJavascript = "https://cdn.example.com/some.js"
+    #  Page SEO config
+    [params.page.seo]
+      # image URL
+      images = []
+      # Publisher info
+      [params.page.seo.publisher]
+        name = ""
+        logoUrl = ""
+  #  TypeIt config
+  [params.typeit]
+    # typing speed between each step (measured in milliseconds)
+    speed = 100
+    # blinking speed of the cursor (measured in milliseconds)
+    cursorSpeed = 1000
+    # character used for the cursor (HTML format is supported)
+    cursorChar = "|"
+    # cursor duration after typing finishing (measured in milliseconds, "-1" means unlimited)
+    duration = -1
+  # Site verification code config for Google/Bing/Yandex/Pinterest/Baidu
+  [params.verification]
+    google = ""
+    bing = ""
+    yandex = ""
+    pinterest = ""
+    baidu = ""
+  #  Site SEO config
+  [params.seo]
+    # image URL
+    image = ""
+    # thumbnail URL
+    thumbnailUrl = ""
+  #  Analytics config
+  [params.analytics]
+    #
+    enable = false
+    # Google Analytics
+    [params.analytics.google]
+      id = ""
+      #  whether to anonymize IP
+      anonymizeIP = true
+      #  whether to respect the browser’s “do not track” setting
+      respectDoNotTrack = false
+    # Fathom Analytics
+    [params.analytics.fathom]
+      id = ""
+      # server url for your tracker if you're self hosting
+      server = ""
+    # Plausible Analytics
+    [params.analytics.plausible]
+      dataDomain = ""
+    # Yandex Metrica
+    [params.analytics.yandexMetrica]
+      id = ""
+  #  Cookie consent config
+  [params.cookieconsent]
+    enable = false
+    # text strings used for Cookie consent banner
+    [params.cookieconsent.content]
+      message = ""
+      dismiss = ""
+      link = ""
+  #  CDN config for third-party library files
+  [params.cdn]
+    # CDN data file name, disabled by default
+    # ["jsdelivr.yml"]
+    # located in "themes/LoveIt/assets/data/cdn/" directory
+    # you can store your own data files in the same path under your project:
+    # "assets/data/cdn/"
+    data = ""
+  #  Compatibility config
+  [params.compatibility]
+    # whether to use Polyfill.io to be compatible with older browsers
+    polyfill = false
+    # whether to use object-fit-images to be compatible with older browsers
+    objectFit = false
+# Markup related config in Hugo
+[markup]
+  # Syntax Highlighting
+  [markup.highlight]
+    codeFences = true
+    guessSyntax = true
+    lineNos = true
+    lineNumbersInTable = true
+    # false is a necessary configuration
+    # (https://github.com/dillonzq/LoveIt/issues/158)
+    noClasses = false
+  # Goldmark is from Hugo 0.60 the default library used for Markdown
+  [markup.goldmark]
+    [markup.goldmark.extensions]
+      definitionList = true
+      footnote = true
+      linkify = true
+      strikethrough = true
+      table = true
+      taskList = true
+      typographer = true
+    [markup.goldmark.renderer]
+      # whether to use HTML tags directly in the document
+      unsafe = true
+  # Table Of Contents settings
+  [markup.tableOfContents]
+    startLevel = 2
+    endLevel = 6
+# Sitemap config
+[sitemap]
+  changefreq = "weekly"
+  filename = "sitemap.xml"
+  priority = 0.5
+# Permalinks config
+#[Permalinks]
+  # posts = ":year/:month/:filename"
+  #posts = ":contentbasename"
+# Privacy config
+[privacy]
+  #  privacy of the Google Analytics (can also be configured in params.analytics.google)
+  [privacy.googleAnalytics]
+    # ...
+  [privacy.twitter]
+    # ...
+  [privacy.youtube]
+    # ...
+# Options to make output .md files
+[mediaTypes]
+  [mediaTypes."text/plain"]
+    suffixes = ["md"]
+# Options to make output .md files
+[outputFormats.MarkDown]
+  mediaType = "text/plain"
+  isPlainText = true
+  isHTML = false
+# Options to make hugo output files
+[outputs]
+  #
+  home = ["HTML", "RSS", "JSON"]
+  page = ["HTML", "MarkDown"]
+  section = ["HTML", "RSS"]
+  taxonomy = ["HTML", "RSS"]
+  
+#[module]
+#  [[module.mounts]]
+#    source = '/mnt/posts'
+#    target = 'content/posts'
diff --git a/container/site/layouts/shortcodes/gallerynew.html b/container/site/layouts/shortcodes/gallerynew.html
new file mode 100644
index 0000000..2aeba1d
--- /dev/null
+++ b/container/site/layouts/shortcodes/gallerynew.html
@@ -0,0 +1,22 @@
+{{ $slug := .Page.Slug }}
+{{ $galleryName := .Get "name" }}
+{{ $file := printf "%s.yaml" $galleryName }}
+{{ $galleryData := .Page.Resources.GetMatch $file | transform.Unmarshal }}
+
+<div class="gallery grid grid-cols-1 sm:grid-cols-2 md:grid-cols-3 gap-4">
+  {{ range $galleryData.images }}
+
+<figure class="{{ .class | default "" }}">
+      <img 
+        src="{{ site.Params.filesBase }}/{{ $slug }}/{{ .src }}" 
+        alt="{{ .alt | default "" }}" 
+        loading="lazy" 
+        decoding="async" />
+      {{ with .caption }}
+        <figcaption>{{ . }}</figcaption>
+      {{ end }}
+    </figure>
+
+
+  {{ end }}
+</div>
diff --git a/container/site/layouts/shortcodes/image.html b/container/site/layouts/shortcodes/image.html
new file mode 100644
index 0000000..32bcf1b
--- /dev/null
+++ b/container/site/layouts/shortcodes/image.html
@@ -0,0 +1,16 @@
+{{ $src := .Get "src" }}
+{{ $alt := .Get "alt" }}
+{{ $slug := .Page.Slug }}
+
+<figure>
+<img 
+    src="{{ site.Params.filesBase }}/{{ $slug }}/{{ $src }}" 
+    alt="{{ $alt }}"
+    loading="lazy" 
+    decoding="async"
+    width="{{ .Get "width" | default "800" }}" />
+
+  {{ with .Get "caption" }}
+    <figcaption>{{ . }}</figcaption>
+  {{ end }}
+</figure>
\ No newline at end of file
diff --git a/container/site/layouts/shortcodes/modelviewer.html b/container/site/layouts/shortcodes/modelviewer.html
new file mode 100644
index 0000000..e3d68dc
--- /dev/null
+++ b/container/site/layouts/shortcodes/modelviewer.html
@@ -0,0 +1,20 @@
+{{- $src := .Get "src" -}}
+{{- $poster := .Get "poster" -}}
+{{- $env := .Get "env" -}}
+{{- $alt := .Get "alt" | default "3D Model" -}}
+{{- $controls := .Get "controls" | default "camera-controls touch-action='pan-y'" -}}
+{{- $shadow := .Get "shadow" | default "0" -}}
+{{ $slug := .Page.Slug }}
+
+<!--move this elsewhere-->
+<script type="module" src="https://ajax.googleapis.com/ajax/libs/model-viewer/4.0.0/model-viewer.min.js"></script>
+
+<model-viewer
+  style="width: 100%; height: 500px;"
+  alt="{{ $alt }}"
+  src="{{ site.Params.filesBase }}/{{ $slug }}/{{ $src }}"
+  poster="{{ site.Params.filesBase }}/{{ $slug }}/{{ $poster }}"
+  environment-image="{{ $env }}"
+  shadow-intensity="{{ $shadow }}"
+  {{ $controls | safeHTMLAttr }}>
+</model-viewer>
diff --git a/container/site/layouts/shortcodes/video.html b/container/site/layouts/shortcodes/video.html
new file mode 100644
index 0000000..e2e9091
--- /dev/null
+++ b/container/site/layouts/shortcodes/video.html
@@ -0,0 +1,50 @@
+{{ $autoplay := .Get "autoplay" -}}
+{{ $caption := .Get "caption" -}}
+{{ $class := .Get "class" -}}
+{{ $loop := .Get "loop" -}}
+{{ $poster := .Get "poster" -}}
+{{ $preload := .Get "preload" | default "metadata" -}}
+{{ $src := .Get "src" -}}
+{{ $width := .Get "width" -}}
+
+{{ $posterres := false -}}
+{{ $resource := false -}}
+{{ $static := false -}}
+{{ $type := false -}}
+
+{{ if and $poster (fileExists (path.Join "/static" $poster)) -}}
+  {{ $poster = relURL $poster -}}
+{{ else if $poster -}}
+  {{ $poster = strings.TrimLeft "/" $poster -}}
+  {{ with resources.Get $poster -}}
+    {{ $posterres = . -}}
+  {{ end -}}
+  {{ with .Page.Resources.Get $poster -}}
+    {{ $posterres = . -}}
+  {{ end -}}
+{{ end -}}
+
+{{ if $posterres -}}
+  {{ if $width -}}
+    {{ $image := $posterres.Resize (printf "%sx" $width) -}}
+    {{ $poster = $image.RelPermalink -}}
+  {{ else -}}
+    {{ $poster = $posterres.RelPermalink -}}
+  {{ end -}}
+{{ end -}}
+
+{{ if not $src -}}
+{{ warnf "%s shortcode number %d in \"content/%s\" is missing the \"src\" attribute." .Name .Ordinal .Page.File.Path -}}
+{{ end -}}
+
+{{ $slug := .Page.Slug }}
+
+
+<figure class="video{{ with $class }} {{ . }}{{ end }}">
+<video controls preload="{{ $preload }}" {{ with $width }}width="{{ . }}"{{ end }} {{ with $poster }}poster="{{ . }}"{{ end }} {{ with $autoplay }}autoplay="{{ . }}"{{ end }} {{ with $loop }}loop="{{ . }}"{{ end }}>
+<source src="{{ site.Params.filesBase }}/{{ $slug }}/{{ $src }}" {{ with $type }}type="{{ . }}"{{ end }}>
+</video>
+{{ with $caption -}}
+<figcaption>{{ . | .Page.RenderString }}</figcaption>
+{{ end -}}
+</figure>
\ No newline at end of file
diff --git a/container/site/static/W.svg b/container/site/static/W.svg
new file mode 100644
index 0000000..22c2523
--- /dev/null
+++ b/container/site/static/W.svg
@@ -0,0 +1,19 @@
+<svg 
+width="66.667" 
+height="57.143" 
+viewBox="0 0 66.667 57.143"
+xmlns="http://www.w3.org/2000/svg">
+<g 
+id="svgGroup" 
+stroke-linecap="round" 
+fill-rule="nonzero" 
+font-size="9pt" 
+stroke="none" 
+stroke-width="0.25mm" 
+fill="#a9a9b3">
+<path
+d="M 4.762 33.333 L 4.762 28.571 L 14.286 28.571 L 14.286 23.81 L 4.762 23.81 L 4.762 19.048 L 14.286 19.048 L 14.286 9.524 L 0 9.524 L 0 4.762 L 4.762 4.762 L 4.762 0 L 19.048 0 L 19.048 4.762 L 23.81 4.762 L 23.81 0 L 38.095 0 L 38.095 4.762 L 47.619 4.762 L 47.619 0 L 57.143 0 L 57.143 4.762 L 61.905 4.762 L 61.905 47.619 L 57.143 47.619 L 57.143 52.381 L 47.619 52.381 L 47.619 57.143 L 38.095 57.143 L 38.095 52.381 L 33.333 52.381 L 33.333 47.619 L 28.571 47.619 L 28.571 42.857 L 33.333 42.857 L 33.333 9.524 L 23.81 9.524 L 23.81 42.857 L 14.286 42.857 L 14.286 33.333 L 4.762 33.333 Z M 42.857 9.524 L 42.857 47.619 L 52.381 47.619 L 52.381 9.524 L 42.857 9.524 Z M 28.571 47.619 L 28.571 52.381 L 23.81 52.381 L 23.81 57.143 L 14.286 57.143 L 14.286 52.381 L 4.762 52.381 L 4.762 47.619 L 9.524 47.619 L 9.524 42.857 L 14.286 42.857 L 14.286 47.619 L 28.571 47.619 Z M 61.905 4.762 L 61.905 0 L 66.667 0 L 66.667 4.762 L 61.905 4.762 Z M 4.762 52.381 L 4.762 57.143 L 0 57.143 L 0 52.381 L 4.762 52.381 Z" 
+vector-effect="non-scaling-stroke">
+</path>
+</g>
+</svg>
\ No newline at end of file
diff --git a/container/site/static/apple-touch-icon.png b/container/site/static/apple-touch-icon.png
new file mode 100644
index 0000000..bfbd1bd
--- /dev/null
+++ b/container/site/static/apple-touch-icon.png
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:86eff5d7cba6170a370a2a9adfa1470b7e860d63ae7e5a54eced8bfd32ff068d
+size 1947
diff --git a/container/site/static/favicon-96x96.png b/container/site/static/favicon-96x96.png
new file mode 100644
index 0000000..6b80f94
--- /dev/null
+++ b/container/site/static/favicon-96x96.png
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:d50b0b7a3fbb568bbd8a934ee0ea653cacc4f4b4e25d13bd4d8f4a0989f959cc
+size 1387
diff --git a/container/site/static/favicon.ico b/container/site/static/favicon.ico
new file mode 100644
index 0000000000000000000000000000000000000000..13b2e5b0f669ecfbf36a8f5292c3623d66565abf
GIT binary patch
literal 15086
zcmeI3TWl6Z6vwxeNKrzO%LAsSjY0})paw4?1~4HpJ{d2l0U>}G<BL&<55Dn14TKPh
z;*%GYL`5rx7_ZU9^wXetSHv3zs0fI7<<SR{`ui_)n)!y=?b7z^C449Ob!N_-GiP>o
zc6N66Ym(F@^+{V>LfVqNJUvOSNs^?c#g!){$su$TNL7E|=p@;I!3=D0NmhXLHK~n2
zHAbMjySoi$z)Wb0#Xvs>T0wRpv(Yho^97qxFfHP*_O5`b`7Ok2@$+R*%nF0)aKtwZ
z@|$9Qz7G3wa4_)mi#vV$qItgo^1EYx=+*zjfvsO$AM^8d7_0vWe5WA4!?!P*5860N
zd2xi*=#B@resP!Qa~Jt~#a9X{tId`08)V5xRK#M-KRT~nj78LorSK2*SAM5~ajxw<
z`rDZE-=g;NL@^=n{1)ws+8F5m7oDG7MLU^e_bYYHFd0_CK*(kqQF|$|^FW=(zXLiQ
zKau*Pa%TZ_ooJoe4|!`A)!ko1XM`~JpV+89@iC<5H+CGR!)87BQfPg^VYly;lmDB#
zc^1!4(eKFd>zSXvPngGlr1yUd$8Zb|f!4hf@N@*txw&@y<UfEekYC>XsrL9!CH@@8
zEu?=zmh`M|7?_XJhqD~eSGE5(o=S<;r~5B{dFy|z|NbE7<ZI*42%IUk`QyzQhDZ0`
zS3v7u$Y<zILY74LCm0Xf^-C=EUu$+>WVrOdulvv8(tqvU`yxZ$e_aZ6T=O-?1L*Uf
zzlKHsz00{GOW#Mt{g-}Tn88)(^Y&sxKK}Gi>yMtHe~!?FE^q%fT>3xK*PoHz|9#98
zJ-deJnLJO1eEzug^J+R7<5u*w^|SH}*7lzjcd6_G!!{!BUs*>`>wo3McclTD|FrcD
zboRoh)aO0FbY=K|k3LKEuDj^_L%)rR_iuj12+7y_KeQ)G^KL0Dauof(<M&$kVtrFu
z4C~-uC?b0QEuWCH`97s@Ts>lICJODJi|*eJW6M|n^qFlQd95Wyq~G5M2~zQXKInhZ
z_YZoO@%vx&yV)le&rj7B<UJqte4oW`5A=w&gJKj+gYf%wtlWy-82OT30GAi=n~6>I
zJ0kiqIsUV$o9y+oiL%;Kzw{H2n$$+1&m+JbLehC$kv5hVl$+6qX_Aaek_8HPIxY94
zsJJ4^s^aVWspgZ(e}2lZk<zkDyG!%aa&KulIc=Af{^IJb9V=(qo8IiqueVf(rQ=E^
zOr2UuxsD;@stnU~m?Pt?-)XhL^-%kr7K4x>jNdZ26K44)l$&7*+~&BQ^g7?h^61Bc
z_6=sMbU8GdO;(DHNxN@@a-~&x>GQsg<*A<vKX`V^>YedSv&l-a*$dil>;CnOhsvRR
zi9$AygJQPAPSAI8earXd4+^h>wYi=Ay<tDlO$6O{4nR@akD=nvE$ZOxI>PuWyS6kA
z$3f#}qP%n=`W?fAuohzC`}ytd!B}%@1&sCkLitL^Tci?=pWg47-cLJZkRjiqzZT41
zZKy3@w4aLpt_}Tb&QN>58{kqOH(pOTn^>Y_Y_MY^uXF2<fqXPqv*ItLt_1JHLD=W`
zj&z%gulLp);YkRkU-7+u_j>&iI5z)k@z3)7Gmg5J9|iq3#<1%ERgYAxe`p6}{Aow=
z^?ji?sb>7H-hxwKmH6(O(pdUD66sGh<6lHPpVfmEpEx@IT4(fL%81Q}svN(IAKt%F
zpCQ$Zzl&(^c$CkGUfuaOns`2|1~a~``<4>>oLK)kPTMDh>DtKnYfbj;mPc%g>_2+$
z|M=_s?ePfVp20%-wpljPo1OCEcRoM9wL6%p_PW{^O@yrdv)`Y0DLe<UHOcHgBx8GR
zrSb{I_V3!GXwSdbt^Hd6^41?+3k@K@ENQoE$F-Sx{m?+WHR5c?QVyS=^b94IfX1pG
zZUoc&Y3%v!GHm5*c4|L;ej}X)@>%Bh`CQC12B|bPmbwLFpl8;`60Z%)aI&F3<<$84
zI-^A1D3cdfR;seu(pH^=BuPq1Q-iR$dQYK$(rJNezNaAGR%ivywKcE-9)j_N)-&KF
zcnmhe&2XMjorL^T@FTnlM?rD~bf46k*a^1Id`|v#cmb^aDdg3MWAHZEZ>FCmuQp9|
z-Ky>@P@E2!;`*R>`7eT=(MoVX+ytFqa<{Y9K3bwSQh%pEpR(@rk}qH)T%v-Ls6TZ&
zXL=r72=9SJ$EiMDtb&s)e;xk`GjeHRf7kam{N{khTvFH{TZ^ypxAS*4{uA)iT5=C)
z?UWSuSN|pWjD|Plj1>0Ab_Zx)Yy+J)iH>DEyrhB?n?IUklJxwO+L)zEr`H_wMe{;^
zv+>dV);!kSp9Jeb*Ns>M3t$tdycy<zt}l&|bnP%7ww^xvzW>#`<hpwNwVEI$7LBqN
P4u{H?PxUf#BH#Z3Wl4sw

literal 0
HcmV?d00001

diff --git a/container/site/static/favicon.svg b/container/site/static/favicon.svg
new file mode 100644
index 0000000..45e4d4d
--- /dev/null
+++ b/container/site/static/favicon.svg
@@ -0,0 +1,3 @@
+<svg xmlns="http://www.w3.org/2000/svg" version="1.1" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:svgjs="http://svgjs.dev/svgjs" width="66.667" height="57.143"><svg width="66.667" height="57.143" viewBox="0 0 66.667 57.143" xmlns="http://www.w3.org/2000/svg"><g id="SvgjsG1022" stroke-linecap="round" fill-rule="nonzero" font-size="9pt" stroke="#000" stroke-width="0.25mm" fill="#000" style="stroke:#000;stroke-width:0.25mm;fill:#000"><path d="M 4.762 33.333 L 4.762 28.571 L 14.286 28.571 L 14.286 23.81 L 4.762 23.81 L 4.762 19.048 L 14.286 19.048 L 14.286 9.524 L 0 9.524 L 0 4.762 L 4.762 4.762 L 4.762 0 L 19.048 0 L 19.048 4.762 L 23.81 4.762 L 23.81 0 L 38.095 0 L 38.095 4.762 L 47.619 4.762 L 47.619 0 L 57.143 0 L 57.143 4.762 L 61.905 4.762 L 61.905 47.619 L 57.143 47.619 L 57.143 52.381 L 47.619 52.381 L 47.619 57.143 L 38.095 57.143 L 38.095 52.381 L 33.333 52.381 L 33.333 47.619 L 28.571 47.619 L 28.571 42.857 L 33.333 42.857 L 33.333 9.524 L 23.81 9.524 L 23.81 42.857 L 14.286 42.857 L 14.286 33.333 L 4.762 33.333 Z M 42.857 9.524 L 42.857 47.619 L 52.381 47.619 L 52.381 9.524 L 42.857 9.524 Z M 28.571 47.619 L 28.571 52.381 L 23.81 52.381 L 23.81 57.143 L 14.286 57.143 L 14.286 52.381 L 4.762 52.381 L 4.762 47.619 L 9.524 47.619 L 9.524 42.857 L 14.286 42.857 L 14.286 47.619 L 28.571 47.619 Z M 61.905 4.762 L 61.905 0 L 66.667 0 L 66.667 4.762 L 61.905 4.762 Z M 4.762 52.381 L 4.762 57.143 L 0 57.143 L 0 52.381 L 4.762 52.381 Z" vector-effect="non-scaling-stroke"></path></g></svg><style>@media (prefers-color-scheme: light) { :root { filter: none; } }
+@media (prefers-color-scheme: dark) { :root { filter: invert(100%); } }
+</style></svg>
\ No newline at end of file
diff --git a/container/site/static/site.webmanifest b/container/site/static/site.webmanifest
new file mode 100644
index 0000000..b8aceff
--- /dev/null
+++ b/container/site/static/site.webmanifest
@@ -0,0 +1,21 @@
+{
+  "name": "wlog - Nicholas Ward",
+  "short_name": "wlog",
+  "icons": [
+    {
+      "src": "/web-app-manifest-192x192.png",
+      "sizes": "192x192",
+      "type": "image/png",
+      "purpose": "maskable"
+    },
+    {
+      "src": "/web-app-manifest-512x512.png",
+      "sizes": "512x512",
+      "type": "image/png",
+      "purpose": "maskable"
+    }
+  ],
+  "theme_color": "#ffffff",
+  "background_color": "#ffffff",
+  "display": "standalone"
+}
\ No newline at end of file
diff --git a/container/site/static/web-app-manifest-192x192.png b/container/site/static/web-app-manifest-192x192.png
new file mode 100644
index 0000000..52cf9ed
--- /dev/null
+++ b/container/site/static/web-app-manifest-192x192.png
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:1a3e6e9ae9626e214905195f002c674eb92f8a4438eebfc8ec868fc116237ba9
+size 2915
diff --git a/container/site/static/web-app-manifest-512x512.png b/container/site/static/web-app-manifest-512x512.png
new file mode 100644
index 0000000..84d5a05
--- /dev/null
+++ b/container/site/static/web-app-manifest-512x512.png
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:14ea686c309efc5889c8d038d34a8c6afba1dfc4da7e94ada8c3dcc6b5f15448
+size 13415
diff --git a/container/site/themes/LoveIt b/container/site/themes/LoveIt
new file mode 160000
index 0000000..4d614e6
--- /dev/null
+++ b/container/site/themes/LoveIt
@@ -0,0 +1 @@
+Subproject commit 4d614e6f78d2ea334af26831ce0f46111fa12bec